Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 16 Nov 2000 02:14:24 -0500
From:      Mark Sturge <techie-guy@home.com>
To:        freebsd-stable@FreeBSD.org
Subject:   failed 'make buildworld'
Message-ID:  <3A138950.4E70B9E2@home.com>

next in thread | raw e-mail | index | archive | help
Hi all.

I'm fairly new to FreeBSD and this is the first post I've felt necessary

to make because I'm stumped on this one.

I've cvsup'd my src and run 'make buildworld', but it has failed 3 times

in a row.  I've yet to have a problem with 'make buildworld' until now.
Here is the problem I'm having about 1.5 hrs into the process:

ad1: WRITE command timeout - resetting
ata0: resetting devices .. ata0-slave: no status, rescheduling device
done.
ad1: HARD WRITE ERROR blk# 20566623 status=0f error=0f
ad1: soft error ECC corrected.

... blah blah blah and it continues with similar error messages.

Eventually my box comes to a halt and I actually have to power down
without shutting down the system correctly.  HDD problem?  Looks to me
that it might be, but I'm not sure.  'make buildworld' has run
flawlessly in the past up to this point.

Any advice would be appreciated...

Mark
techie-guy@home.com
--

FreeBSD cr109568-a.lndn1.on.wave.home.com 4.1.1-RELEASE FreeBSD
4.1.1-RELEASE #0: Tue Sep 26 00:46:59 GMT 2000
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC i386

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

        The Regents of the University of California. All rights
reserved.
FreeBSD 4.1.1-RELEASE #0: Tue Sep 26 00:46:59 GMT 2000
    jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P55C (233.86-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 67108864 (65536K bytes)
config> di psm0
config> di sn0
config> di lnc0
config> di le0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 61214720 (59780K bytes)
Preloaded elf kernel "kernel" at 0xc0416000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc041609c.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 1.1

on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6000-0x601f at
device 1.2 on pci0
uhci0: Invalid irq 255
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
device_probe_and_attach: uhci0 attach returned 6
chip1: <Intel 82371AB Power management controller> port 0x5c00-0x5c0f at

device 1.3 on pci0
pci0: <ATI Mach64-GU graphics accelerator> at 9.0
pci0: <3Dfx Voodoo 2 graphics accelerator> at 10.0
de0: <Digital 21041 Ethernet> port 0x6800-0x687f mem
0xe2001000-0xe200107f irq 11 at device 11.0 on pci0
de0: SMC 21041 [10Mb/s] pass 2.1
de0: address 00:e0:29:1e:44:8e
isa0: too many dependant configs (8)
isa0: unexpected small tag 14
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
de0: enabling 10baseT port
ad0: 19546MB <FUJITSU MPF3204AT> [39714/16/63] at ata0-master using
UDMA33
ad1: 16500MB <FUJITSU MPD3173AT> [33525/16/63] at ata0-slave using
UDMA33
acd0: CDROM <MATSHITA CR-593> at ata1-master using PIO4
Mounting root from ufs:/dev/ad1s1a





To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A138950.4E70B9E2>