Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 18 Sep 2000 09:21:57 -0400
From:      Hasan Diwan <hdiwan@pobox.com>
To:        freebsd-stable@freebsd.org
Subject:   Re: boot hangs at 'Mounting root' after 3.4-S -> 4.1-S upgrade
Message-ID:  <20000918092157.A3928@workhorse.nycap.rr.com>
In-Reply-To: <Pine.LNX.4.21.0009181435480.13791-100000@netcore.fi>; from pekkas@netcore.fi on Mon, Sep 18, 2000 at 02:39:03PM %2B0300
References:  <Pine.LNX.4.21.0009181435480.13791-100000@netcore.fi>

next in thread | previous in thread | raw e-mail | index | archive | help

--/04w6evG8XlLl3ft
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

* Pekka Savola (pekkas@netcore.fi) [000918 11:41]:
> I recently upgraded (or tried..) my 3.4-STABLE system to 4.1-STABLE.
>=20
> I did as follows (pretty much along the lines of UPDATING):=20
>=20
> - CVSup everything RELENG_4 from a server
> - make buildworld
> - make buildkernel KERNEL=3Dmyown (tuned down from generic)
> - make installkernel KERNEL=3Dmyown
> - cd /usr/src/sbin/mknod ; make install
> - cp /usr/src/etc/MAKEDEV /dev ; cd /dev ; sh MAKEDEV ad[01]s[12][a-h]
> (all entries used in /etc/fstab)
> - Changed all references to wdXX to adXX in /etc/fstab
> - reboot
>=20
> [ - after the reboot I had the intention to finish the update process. ]
>=20
> Now, the bootup process hangs after printing:
>=20
> Mounting root from ufs: wd0s1a [or similar]
  if you changed all references from wd to ad, it should say ad0s1a, not
wd0s1a.=20
>=20
> There is no disk activity. CTRL-ALT-DEL works only sometimes (prints out
> stuff like killing bufdaemon, etc.)
>=20
> I booted the system using kern/mfsroot/fixit.flp combo, rebuilt kernel
> (this time GENERIC) and installed it.  The same freeze happened with
B
> GENERIC kernel too.  The same also happens if you tell boot loader 'boot
> -a' and choose ufs:/dev/ad0s1a.
>=20
> The system in question is P90, with buggy CMD640 chipset (identified as
> such).  100% same procedure worked fine on my other, P2 system.
>=20
> Anyone used CMD640 chipset system w/ FreeBSD-4.x?  Have you had any
> problems.
>=20
> Any ideas?
>=20
> --=20
> Pekka Savola                 "Tell me of difficulties surmounted,=20
> Pekka.Savola@netcore.fi      not those you stumble over and fall"
>=20
>=20
>=20
>=20
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
>=20
>=20

--=20
Hasan Diwan [hdiwan@pobox.com] :)
Rensselaer Polytechnic Institute=20
Computer Science Department
http://hdwork.dhs.org/~hdiwan=20

--/04w6evG8XlLl3ft
Content-Type: application/pgp-signature

-----BEGIN PGP SIGNATURE-----
Version: 2.6.3ia

iQCVAwUBOcYW9fitTU38wbMJAQG2aAQAsQjN/SeQw5XAxbS3vXiYTYKKEfkXpYz5
iqGAYW9tEFH1UG6awGKoNSy+7h55xcEKktxEyix2DpKrQ47kk+nTtkn3b2iXOCqW
pxFnoEmVn1CnzdSSUcpsO66QYlot1rmTNNqiiA2nZPy+m14CfLR+fhpDFGWVTyBl
R3qMH+BoPvQ=
=8ewC
-----END PGP SIGNATURE-----

--/04w6evG8XlLl3ft--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000918092157.A3928>