Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 16 Jun 2010 15:25:47 -0600 (MDT)
From:      "M. Warner Losh" <imp@bsdimp.com>
To:        andrew@fubar.geek.nz
Cc:        svn-src-head@FreeBSD.org, raj@FreeBSD.org, svn-src-all@FreeBSD.org, src-committers@FreeBSD.org
Subject:   Re: svn commit: r209129 - head/sys/arm/arm
Message-ID:  <20100616.152547.756786594356063577.imp@bsdimp.com>
In-Reply-To: <20100616210344.47209ff2@bender>
References:  <201006131308.o5DD8NTA033564@svn.freebsd.org> <20100616210344.47209ff2@bender>

next in thread | previous in thread | raw e-mail | index | archive | help
In message: <20100616210344.47209ff2@bender>
            Andrew Turner <andrew@fubar.geek.nz> writes:
: On Sun, 13 Jun 2010 13:08:23 +0000 (UTC)
: Rafal Jaworowski <raj@FreeBSD.org> wrote:
: 
: > Author: raj
: > Date: Sun Jun 13 13:08:23 2010
: > New Revision: 209129
: > URL: http://svn.freebsd.org/changeset/base/209129
: > 
: > Log:
: >   Improve style.
: > 
: > Modified:
: >   head/sys/arm/arm/nexus.c
: > 
: > Modified: head/sys/arm/arm/nexus.c
: > ==============================================================================
: > --- head/sys/arm/arm/nexus.c	Sun Jun 13 13:02:43 2010
: > (r209128) +++ head/sys/arm/arm/nexus.c	Sun Jun 13 13:08:23
: > 2010	(r209129) @@ -107,6 +107,7 @@ static devclass_t
: > nexus_devclass; static int
: >  nexus_probe(device_t dev)
: >  {
: > +
: >  	device_quiet(dev);	/* suppress attach message for
: > neatness */ 
: >  	mem_rman.rm_start = 0;
: > @@ -116,7 +117,7 @@ nexus_probe(device_t dev)
: >  	if (rman_init(&mem_rman) || rman_manage_region(&mem_rman, 0,
: > ~0u)) panic("nexus_probe mem_rman");
: >  
: > -	return (0);
: > +	return (BUS_PROBE_DEFAULT);
: Changing the return value of nexus_probe from 0 to BUS_PROBE_DEFAULT
: causes the following panic for me when the s3c24x0 driver calls
: rman_init. The attached patch fixes it by moving the call to rman_init
: from nexus_probe to nexus_attach.

The reason is that softc is reset between probe/attach when a number
that isn't 0 is returned, but doesn't when 0 is returned.

Warner


: Andrew
: 
: KDB: debugger backends: ddb
: KDB: current backend: ddb
: Copyright (c) 1992-2010 The FreeBSD Project.
: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
: 	The Regents of the University of California. All rights
: reserved. FreeBSD is a registered trademark of The FreeBSD Foundation.
: FreeBSD 9.0-CURRENT #10 r209128M: Wed Jun 16 20:47:22 NZST 2010
:     andrew@bender:/usr/obj/arm/home/andrew/freebsd/svn/head/sys/LN2410SBC
: arm WARNING: WITNESS option enabled, expect reduced performance.
: CPU: ARM920T rev 0 (ARM9TDMI core)
:   DC enabled IC enabled WB enabled LABT
:   16KB/32B 64-way Instruction cache
:   16KB/32B 64-way write-back-locking-A Data cache
: real memory  = 67108864 (64 MB)
: avail memory = 56320000 (53 MB)
: s3c24x00 on motherboard
: s3c24x00: Found S3C2410A CPU (Chip ID: 0x32410002)
: s3c24x00: fclk 202 MHz hclk 101 MHz pclk 50 MHz
: panic: Bad tailq NEXT(0xc068eab8->tqh_last) != NULL
: KDB: enter: panic
: [ thread pid 0 tid 100000 ]
: Stopped at      kdb_enter+0x44: ldrb    r15, [r15, r15, ror r15]!
: db> reset



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100616.152547.756786594356063577.imp>