Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 13 Nov 97 07:57:32 -0800
From:      "Mike Burgett" <mburgett@awen.com>
To:        "questions@freebsd.org" <questions@freebsd.org>
Subject:   2.2.5 install problem: not probing psm0?
Message-ID:  <199711131557.HAA28449@dragon.awen.com>

next in thread | raw e-mail | index | archive | help
I just installed 2.2.5 on an IBM Thinkpad 760ED, and can't seem to get psm0 to 
probe at all, with either a custom kernel, or the generic.  Trackpoint was 
working fine when I killed the Win95 installation that was on it.

Here's my config lines:

device		psm0	at isa? disable port "IO_KBD" conflicts tty irq 12
vector psmintr

options		PSM_DEBUG=2
options		PSM_ACCEL=1
options		PSM_CHECKSYNC
options		KBD_RESETDELAY=500
options		KBD_MAXWAIT=10
options		KBDIO_DEBUG=2


and here's the dmesg output:

FreeBSD 2.2.5-RELEASE #0: Thu Nov 13 07:25:56 PST 1997
    root@mobile.awen.com:/usr/src/sys/compile/MOBILE
CPU: Pentium (132.63-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x52c  Stepping=12
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 16777216 (16384K bytes)
avail memory = 14839808 (14492K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437MX mobile PCI cache memory controller> rev 2 on pci0:0
chip1 <Intel 82371FB PCI-ISA bridge> rev 2 on pci0:1
chip2 <generic PCI bridge (vendor=104c device=ac12 subclass=7)> rev 4 int a 
irq ?? on pci0:2:0
chip3 <generic PCI bridge (vendor=104c device=ac12 subclass=7)> rev 4 int b 
irq ?? on pci0:2:1
vga0 <VGA-compatible display device> rev 211 int a irq 11 on pci0:3
pci0:5:    vendor=0x1014, device=0x0057, class=multimedia (video) int a irq 11 
[no driver assigned]
Probing for devices on the ISA bus:
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
kbdio: new command byte:0044 (set_controller...)
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
kbdio: new command byte:0045 (set_controller...)
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
pccard driver sio added
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <IBM-DMCA-21440>
wd0: 1376MB (2818368 sectors), 2796 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (atapi): <SANYO CRD-S54P/1.09.>, removable, iordy
wcd0: 689Kb/sec, 256Kb cache, audio play, 256 volume levels, ejectable tray
wcd0: no disc inside, unlocked
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
PC-Card Intel 82365 (5 mem & 2 I/O windows)
pcic: controller irq 3

psm.o is getting built, but there's no evidence that psm0 ever probes for the 
device... :-/

Probably something stupid, but at this point, I can't see anything else to do.  
I've checked the errata, and searched the online maillist messages, and 
haven't seen this problem described (failed probes yes, but not no-probes...)

Thanks in advance,
Mike





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199711131557.HAA28449>