Date: Thu, 27 Nov 1997 13:44:06 +0800 (PHT) From: Francis Vidal <francis@cody.usls.edu> To: Greg Lehey <grog@lemis.com> Cc: Alastair Rankine <alastair@cia.com.au>, FreeBSD Questions <FreeBSD-Questions@FreeBSD.ORG> Subject: Re: mousedtype? Message-ID: <Pine.BSF.3.96.971127134218.690A-100000@cody.usls.edu> In-Reply-To: <19971127142729.33627@lemis.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 27 Nov 1997, Greg Lehey wrote:
> > ugghhh! i still can't run my mouse :-I . what's the device for
> > COM1-COM4?
>
> In this case, /dev/ttyd0 through /dev/ttyd3.
tried to run 'moused -p /dev/ttyd0 -t microsoft' -- didn't work :-I
> > my on-board comm ports are all busted so installed a super i/o card and
> > used the comm ports of the card instead. during boot-up, the kernel tells
> > me that sio(something) has been disabled (blah blah)
>
> Well, how about some details? In case of doubt, the output from
> dmesg.
-------------------------INCLUDED TEXT-------------------------
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.2-RELEASE #0: Thu Nov 20 15:18:51 PHT 1997
root@design.usls.edu:/usr/src/sys/compile/DESIGN
CPU: Pentium (100.23-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x526 Stepping=6
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
avail memory = 30785536 (30064K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437FX PCI cache memory controller> rev 2 on pci0:0
chip1 <Intel 82371FB PCI-ISA bridge> rev 2 on pci0:7:0
chip2 <Intel 82371FB IDE interface> rev 2 on pci0:7:1
vga0 <VGA-compatible display device> rev 84 int a irq 11 on pci0:18
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16450
sio1 not found at 0x2f8
sio2: disabled, not probed.
sio3: disabled, not probed.
lpt0 at 0x278-0x27f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 765
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff on isa
wdc0: unit 0 (wd0): <ST32132A>, 32-bit, multi-block-16
wd0: 2015MB (4127760 sectors), 4095 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (atapi): <CD620E/1.01>, removable, iordy
wcd0: 880Kb/sec, 240Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: 120mm audio disc loaded, unlocked
1 3C5x9 board(s) on ISA found at 0x300
ep0 at 0x300-0x30f irq 3 on isa
ep0: aui/utp/bnc[*UTP*] address 00:a0:24:dc:29:80
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
mountmsdosfs(): Warning: root directory is not a multiple of the clustersize in length
cmd XF86_S3 pid 659 tried to use non-present SYSVSHM
cmd XF86_S3 pid 2048 tried to use non-present SYSVSHM
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.971127134218.690A-100000>