Date: Mon, 07 Jan 2008 11:04:02 -0700 From: Scott Long <scottl@samsco.org> To: Lan Tran <lan@hangwithme.com> Cc: freebsd-scsi@freebsd.org Subject: Re: QLogic HBAs+EMC AX100 SAN Message-ID: <47826992.10200@samsco.org> In-Reply-To: <47826194.1080703@hangwithme.com> References: <47826194.1080703@hangwithme.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Lan Tran wrote: > I'd like to direct connect a FreeBSD-6.2 system to an EMC AX100 SAN > using 2 QLogic 23xx series HBAs. Here is the dmesg output: > isp0: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0xec00-0xecff mem > 0xdfdff000-0xdfdfffff irq 39 at device 12.0 on pci2 > isp0: [GIANT-LOCKED] > isp0: Polled Mailbox Command (0x2) Timeout > isp0: Polled Mailbox Command (0x8) Timeout > device_attach: isp0 attach returned 6 > > isp1: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0xdc00-0xdcff mem > 0xdfbff000-0xdfbfffff irq 37 at device 11.0 on pci3 > isp1: [GIANT-LOCKED] > isp1: Polled Mailbox Command (0x2) Timeout > isp1: Polled Mailbox Command (0x8) Timeout > device_attach: isp1 attach returned 6 > > During boot the system would hang after for awhile then continue. I > have created a LUN and assigned it to this system, but the OS does not > see it. What am I missing? What commands should I try from the OS? > Does anyone have a similar setup working with the QLogic HBAs? AX100 > used to be connected to RHEL but I want to use FreeBSD instead :). > > Lan Did you compile in or load the ispfw module? Without it, FC operations are severely limited. Scott
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47826992.10200>