Date: Tue, 17 Apr 2001 23:13:51 +0200 From: "Leif Neland" <leifn@neland.dk> To: <freebsd-questions@FreeBSD.ORG> Subject: RealTek 8029 pci.:device_probe_and_attach: ed0 attach returned 2 Message-ID: <028f01c0c783$4d685420$6405a8c0@neland.dk>
next in thread | raw e-mail | index | archive | help
I try to add a second NIC to my gateway machine, running current..
(Will be getting ADSL may 10, may 15 my 24h flatrate ISDN changes to 8h
flatrate, rest minute charge, talk about timing.
So I have 23 days to get this fixed)
The first card is a D-LINK 250 isa, it was ed0, but by changing
device.hints it became ed1; it is working.
The second card is a RealTek 8029 pci.
I get the errormessage:
device_probe_and_attach: ed0 attach returned 2
I've searched the archives and only found the advice to turn off pnp in
the bios. However, my old dec bios does not have that option, neither do I
have PNPBIOS in my kernel config (I think that option is depreciated btw)
The machine does not have ide-disks, so int15 is available.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #9: Wed Apr 4 18:49:51 CEST 2001
root@gina.neland.dk:/usr/obj/usr/src/sys/ARNOLD
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 59973117 Hz
CPU: Pentium/P5 (59.97-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x515 Stepping = 5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 117440512 (114688K bytes)
Preloaded elf kernel "kernel" at 0xc03eb000.
Intel Pentium detected, installing workaround for F00F bug
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
ncr0: <ncr 53c810 fast10 scsi> port 0xd100-0xd1ff mem 0x20000000-0x200000ff irq 11 at device 1.0 on pci0
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pci0: <display, VGA> at 6.0 (no driver attached)
ed0: <NE2000 PCI Ethernet (RealTek 8029)> irq 15 at device 7.0 on pci0
device_probe_and_attach: ed0 attach returned 2
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
ed1 at port 0x340-0x35f iomem 0xd8000 irq 10 on isa0
ed1: address 00:80:c8:18:9c:c2, type NE2000 (16 bit)
^^^^^^^^^^^^^^^^^^^^^^^ D-LINK 250 ^^^^^^^^^^^^^^^^^
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc1: <Parallel port> at port 0x278-0x27f irq 5 on isa0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip1: <PLIP network interface> on ppbus1
lpt1: <Printer> on ppbus1
lpt1: Interrupt-driven port
ppi1: <Parallel I/O> on ppbus1
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16450
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isic0: <Dr.Neuhaus Niccy Go@> at port 0x200-0x201,0x202-0x203 irq 9 on isa0
isic0: passive stack unit 0
i4btrc: 2 ISDN trace device(s) attached
i4bing: 2 i4b NetGraph ISDN B-channel device(s) attached
i4btel: 2 ISDN telephony interface device(s) attached
i4bisppp: 4 ISDN SyncPPP device(s) attached (VJ header compression)
i4b: ISDN call control device attached
i4brbch: 2 raw B channel access device(s) attached
i4bipr: 2 IP over raw HDLC ISDN device(s) attached (VJ header compression)
i4bctl: ISDN system control port attached
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
cd0 at ncr0 bus 0 target 5 lun 0
cd0: <COMPAQ CD-ROM CR-503BCQ 1.1c> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: cd present [234900 x 2048 byte records]
da1 at ncr0 bus 0 target 1 lun 0
da1: <Quantum XP34300 81HB> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da1: 4101MB (8399520 512 byte sectors: 255H 63S/T 522C)
da3 at ncr0 bus 0 target 3 lun 0
da3: <MAXTOR XT-3280 E.3> Fixed Direct Access SCSI-0 device
da3: 3.300MB/s transfers
da3: 231MB (474602 512 byte sectors: 64H 32S/T 231C)
da0 at ncr0 bus 0 target 0 lun 0
da0: <SEAGATE ST15150N 0017> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C)
da2 at ncr0 bus 0 target 2 lun 0
da2: <IBM DCAS-34330 S65A> Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 8)
da2: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
Leif
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?028f01c0c783$4d685420$6405a8c0>