From owner-freebsd-questions Tue Apr 17 14:13:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns.internet.dk (ns.internet.dk [194.19.140.1]) by hub.freebsd.org (Postfix) with ESMTP id D6B7937B440 for ; Tue, 17 Apr 2001 14:13:09 -0700 (PDT) (envelope-from leifn@neland.dk) Received: (from uucp@localhost) by ns.internet.dk (8.11.2/8.11.2) id f3HLD9e20044 for freebsd-questions@FreeBSD.ORG.AVP; Tue, 17 Apr 2001 23:13:09 +0200 (CEST) (envelope-from leifn@neland.dk) Received: (from uucp@localhost) by ns.internet.dk (8.11.2/8.11.2) with UUCP id f3HLD8T20001 for freebsd-questions@FreeBSD.ORG; Tue, 17 Apr 2001 23:13:08 +0200 (CEST) (envelope-from leifn@neland.dk) Received: from gina (gina.neland.dk [192.168.5.100] (may be forged)) by arnold.neland.dk (8.11.3/8.11.0) with SMTP id f3HLCpB82873 for ; Tue, 17 Apr 2001 23:12:51 +0200 (CEST) (envelope-from leifn@neland.dk) Message-ID: <028f01c0c783$4d685420$6405a8c0@neland.dk> Reply-To: "Leif Neland" From: "Leif Neland" To: Subject: RealTek 8029 pci.:device_probe_and_attach: ed0 attach returned 2 Date: Tue, 17 Apr 2001 23:13:51 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from base64 to 8bit by ns.internet.dk id f3HLD8T20001 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I try to add a second NIC to my gateway machine, running current.. (Will be getting ADSL may 10, may 15 my 24h flatrate ISDN changes to 8h flatrate, rest minute charge, talk about timing. So I have 23 days to get this fixed) The first card is a D-LINK 250 isa, it was ed0, but by changing device.hints it became ed1; it is working. The second card is a RealTek 8029 pci. I get the errormessage: device_probe_and_attach: ed0 attach returned 2 I've searched the archives and only found the advice to turn off pnp in the bios. However, my old dec bios does not have that option, neither do I have PNPBIOS in my kernel config (I think that option is depreciated btw) The machine does not have ide-disks, so int15 is available. Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #9: Wed Apr 4 18:49:51 CEST 2001 root@gina.neland.dk:/usr/obj/usr/src/sys/ARNOLD Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 59973117 Hz CPU: Pentium/P5 (59.97-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x515 Stepping = 5 Features=0x1bf real memory = 117440512 (114688K bytes) Preloaded elf kernel "kernel" at 0xc03eb000. Intel Pentium detected, installing workaround for F00F bug npx0: on motherboard npx0: INT 16 interface pcib0: at pcibus 0 on motherboard pci0: on pcib0 ncr0: port 0xd100-0xd1ff mem 0x20000000-0x200000ff irq 11 at device 1.0 on pci0 isab0: at device 2.0 on pci0 isa0: on isab0 pci0: at 6.0 (no driver attached) ed0: irq 15 at device 7.0 on pci0 device_probe_and_attach: ed0 attach returned 2 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 ed1 at port 0x340-0x35f iomem 0xd8000 irq 10 on isa0 ed1: address 00:80:c8:18:9c:c2, type NE2000 (16 bit) ^^^^^^^^^^^^^^^^^^^^^^^ D-LINK 250 ^^^^^^^^^^^^^^^^^ ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ppc1: at port 0x278-0x27f irq 5 on isa0 ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip1: on ppbus1 lpt1: on ppbus1 lpt1: Interrupt-driven port ppi1: on ppbus1 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16450 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isic0: at port 0x200-0x201,0x202-0x203 irq 9 on isa0 isic0: passive stack unit 0 i4btrc: 2 ISDN trace device(s) attached i4bing: 2 i4b NetGraph ISDN B-channel device(s) attached i4btel: 2 ISDN telephony interface device(s) attached i4bisppp: 4 ISDN SyncPPP device(s) attached (VJ header compression) i4b: ISDN call control device attached i4brbch: 2 raw B channel access device(s) attached i4bipr: 2 IP over raw HDLC ISDN device(s) attached (VJ header compression) i4bctl: ISDN system control port attached Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s1a cd0 at ncr0 bus 0 target 5 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: cd present [234900 x 2048 byte records] da1 at ncr0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da1: 4101MB (8399520 512 byte sectors: 255H 63S/T 522C) da3 at ncr0 bus 0 target 3 lun 0 da3: Fixed Direct Access SCSI-0 device da3: 3.300MB/s transfers da3: 231MB (474602 512 byte sectors: 64H 32S/T 231C) da0 at ncr0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) da2 at ncr0 bus 0 target 2 lun 0 da2: Fixed Direct Access SCSI-2 device da2: 10.000MB/s transfers (10.000MHz, offset 8) da2: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C) Leif To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message