Date: Mon, 8 Jul 2002 11:26:15 +0200 (CEST) From: Erwin Lansing <erwin@lansing.dk> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/40330: ATA no longer supports Asus A7V266-E Promise RAID Message-ID: <200207080926.g689QFj35063@valhalla.pil.dk>
next in thread | raw e-mail | index | archive | help
>Number: 40330 >Category: kern >Synopsis: ATA no longer supports Asus A7V266-E Promise RAID >Confidential: no >Severity: critical >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Jul 08 02:30:01 PDT 2002 >Closed-Date: >Last-Modified: >Originator: Erwin Lansing >Release: FreeBSD 4.5-RELEASE-p7 i386 >Organization: pil.dk >Environment: System: FreeBSD valhalla.pil.dk 4.5-RELEASE-p7 FreeBSD 4.5-RELEASE-p7 #2: Wed Jul 3 11:40:59 CEST 2002 root@valhalla.pil.dk:/usr/obj/usr/src/sys/VALHALLA i386 >Description: After the big ata merge, our Promise ATA RAID stopped working with a device 'ar' not found. It seems the chipset is not fully recognised. It's ASUS A7V266-E mobo with VIA VT8233 chipset. As said, it works fine with 4.5-RELEASE (and -STABLE before the ata merge). Verbose boot of 4.6-RELEASE and normal boot of 4.5-RELEASE attached. Previously posted to -stable: Message-ID: <20020703113659.B22250@droso.net> >How-To-Repeat: --- dmesg.releng45 begins here --- Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-STABLE #0: Sat Feb 9 00:38:45 CET 2002 root@prison.pil.dk:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(TM)Processor (1333.39-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> real memory = 134135808 (130992K bytes) avail memory = 125861888 (122912K bytes) Preloaded elf kernel "kernel.old" at 0xc0496000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 10 entries at 0xc00f13a0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci0: <unknown card> (vendor=0x13f6, dev=0x0111) at 5.0 irq 11 atapci0: <Promise ATA100 controller> port 0xb000-0xb03f,0xb400-0xb403,0xb800-0xb807,0xd000-0xd003,0xd400-0xd407 mem 0xef000000-0xef01ffff irq 12 at device 6.0 on pci0 ata2: at 0xd400 on atapci0 ata3: at 0xb800 on atapci0 pci0: <NVidia model 0110 graphics accelerator> at 12.0 irq 12 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa800-0xa87f mem 0xed800000-0xed80007f irq 11 at device 14.0 on pci0 xl0: Ethernet address: 00:04:76:9e:bd:4a miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sym0: <895> port 0xa400-0xa4ff mem 0xec800000-0xec800fff,0xed000000-0xed0000ff irq 10 at device 15.0 on pci0 sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <VIA 82C686 ATA100 controller> port 0xa000-0xa00f irq 0 at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata1: at 0x170 irq 15 on atapci1 uhci0: <VIA 83C572 USB controller> port 0x9800-0x981f irq 12 at device 17.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0x9400-0x941f irq 12 at device 17.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0x9000-0x901f irq 12 at device 17.4 on pci0 usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xd0000-0xd7fff,0xd8000-0xd87ff on isa0 fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata0-master UDMA100 ad1: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata0-slave UDMA100 ad2: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata1-master UDMA100 ad3: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata1-slave UDMA100 ad5: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata2-slave UDMA100 ar0: 117288MB <ATA RAID0 array> [14952/255/63] subdisks: ad4: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata2-master UDMA100 ad6: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata3-master UDMA100 ad7: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata3-slave UDMA100 Waiting 15 seconds for SCSI devices to settle sa0 at sym0 bus 0 target 14 lun 0 sa0: <SONY SDT-10000 0101> Removable Sequential Access SCSI-2 device sa0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) Mounting root from ufs:/dev/ar0s1a ad4s1: slice extends beyond end of disk: truncating from 240203817 to 120103137 sectors ad4: raw partition size != slice size ad4: start 63, end 120103199, size 120103137 ad4c: start 63, end 240203879, size 240203817 ad4: truncating raw partition ad4: rejecting partition in BSD label: it isn't entirely within the slice ad4: start 63, end 120103199, size 120103137 ad4h: start 7520319, end 240203879, size 232683561 ad4s1: slice extends beyond end of disk: truncating from 240203817 to 120103137 sectors [snip] IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled IPv6 packet filtering initialized, logging disabled --- dmesg.releng45 ends here --- --- dmesg.releng46 begins here --- ? panic: Root mount failed, startup aborted. syncing disks... done Uptime: 33s Automatic reboot in 15 seconds - press a key on the console to abort Rebooting... /-\|/-\|/-\|/-\Console: serial port BIOS drive C: is disk0 BIOS drive D: is disk1 BIOS drive E: is disk2 BIOS drive F: is disk3 BIOS drive G: is disk4 BIOS 630kB/129968kB available memory FreeBSD/i386 bootstrap loader, Revision 0.8 (root@prison.pil.dk, Thu Jun 27 10:52:18 CEST 2002) |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-Loading /boot/defaults/loader.conf \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\/kernel text=0x1a4d61 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/data=0x23bc0+0x1deb4 -\|/-\|/-\syms=[0x4+0x28690|/-\|/-\|/+0x4+0x2e9f4-\|/-\|/-\|/] -\|/-\|/-\|/-\|/-\|/-\|/-\|/ Hit [Enter] to boot immediately, or any other key for command prompt. Booting [kernel] in 9 seconds... Booting [kernel] in 8 seconds... Booting [kernel] in 7 seconds... Booting [kernel] in 6 seconds... Booting [kernel] in 5 seconds... Booting [kernel] in 4 seconds... Booting [kernel] in 3 seconds... Booting [kernel] in 2 seconds... Booting [kernel] in 1 second... Type '?' for a list of commands, 'help' for more detailed help. ok boot -v -\|/-\|SMAP type=01 base=00000000 00000000 len=00000000 0009d800 SMAP type=02 base=00000000 0009d800 len=00000000 00002800 SMAP type=02 base=00000000 000f0000 len=00000000 00010000 SMAP type=01 base=00000000 00100000 len=00000000 07eec000 SMAP type=03 base=00000000 07fec000 len=00000000 00003000 SMAP type=02 base=00000000 07fef000 len=00000000 00010000 SMAP type=04 base=00000000 07fff000 len=00000000 00001000 SMAP type=02 base=00000000 ffff0000 len=00000000 00010000 Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-RELEASE-p1 #7: Wed Jul 3 09:56:52 CEST 2002 root@prison.pil.dk:/usr/obj/usr/src/sys/VALHALLA Calibrating clock(s) ... TSC clock: 1333386235 Hz, i8254 clock: 1193187 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 1333388753 Hz CPU: AMD Athlon(TM)Processor (1333.39-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> Data TLB: 24 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 134135808 (130992K bytes) Physical memory chunk(s): 0x00001000 - 0x0009cfff, 638976 bytes (156 pages) 0x00367000 - 0x07fe3fff, 130535424 bytes (31869 pages) avail memory = 127217664 (124236K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f1470 bios32: Entry = 0xf0bf0 (c00f0bf0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xdf0 pnpbios: Found PnP BIOS data at 0xc00fbd70 pnpbios: Entry = f0000:bda0 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: ACPI: 000f6cc0 Preloaded elf kernel "kernel" at 0xc0340000. Pentium Pro MTRR support enabled pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30991106) Using $PIR table, 10 entries at 0xc00f13a0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x1106, dev=0x3099, revid=0x00 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base fc000000, size 25 found-> vendor=0x1106, dev=0xb099, revid=0x00 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x13f6, dev=0x0111, revid=0x10 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000d800, size 8 found-> vendor=0x105a, dev=0x0d30, revid=0x02 class=01-04-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=12 map[10]: type 1, range 32, base 0000d400, size 3 map[14]: type 1, range 32, base 0000d000, size 2 map[18]: type 1, range 32, base 0000b800, size 3 map[1c]: type 1, range 32, base 0000b400, size 2 map[20]: type 1, range 32, base 0000b000, size 6 map[24]: type 1, range 32, base ef000000, size 17 found-> vendor=0x10de, dev=0x0110, revid=0xb2 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=12 map[10]: type 1, range 32, base ee000000, size 24 map[14]: type 1, range 32, base f0000000, size 27 found-> vendor=0x10b7, dev=0x9200, revid=0x78 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000a800, size 7 map[14]: type 1, range 32, base ed800000, size 7 found-> vendor=0x1000, dev=0x000c, revid=0x01 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 0000a400, size 8 map[14]: type 1, range 32, base ed000000, size 8 map[18]: type 1, range 32, base ec800000, size 12 found-> vendor=0x1106, dev=0x3074, revid=0x00 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1106, dev=0x0571, revid=0x06 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=0 map[20]: type 1, range 32, base 0000a000, size 4 found-> vendor=0x1106, dev=0x3038, revid=0x1b class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=12 map[20]: type 1, range 32, base 00009800, size 5 found-> vendor=0x1106, dev=0x3038, revid=0x1b class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=12 map[20]: type 1, range 32, base 00009400, size 5 found-> vendor=0x1106, dev=0x3038, revid=0x1b class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=12 map[20]: type 1, range 32, base 00009000, size 5 pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci0: <unknown card> (vendor=0x13f6, dev=0x0111) at 5.0 irq 11 atapci0: <Promise ATA100 controller> port 0xb000-0xb03f,0xb400-0xb403,0xb800-0xb807,0xd000-0xd003,0xd400-0xd407 mem 0xef000000-0xef01ffff irq 12 at device 6.0 on pci0 ata-: ata2 exists, using next available unit number ata2: iobase=0xd400 altiobase=0xd002 bmaddr=0xb000 ata2: mask=03 ostat0=50 ostat2=50 ata2-master: ATAPI 00 00 ata2-slave: ATAPI 00 00 ata2: mask=03 stat0=50 stat1=50 ata2-master: ATA 01 a5 ata2-slave: ATA 01 a5 ata2: devices=03 ata2: at 0xd400 on atapci0 ata3: iobase=0xb800 altiobase=0xb402 bmaddr=0xb008 ata3: mask=03 ostat0=50 ostat2=50 ata3-master: ATAPI 00 00 ata3-slave: ATAPI 00 00 ata3: mask=03 stat0=50 stat1=50 ata3-master: ATA 01 a5 ata3-slave: ATA 01 a5 ata3: devices=03 ata3: at 0xb800 on atapci0 using shared irq12. pci0: <NVidia model 0110 graphics accelerator> (vendor=0x10de, dev=0x0110) at 12.0 irq 12 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa800-0xa87f mem 0xed800000-0xed80007f irq 11 at device 14.0 on pci0 xl0: Ethernet address: 00:04:76:9e:bd:4a xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x00105a, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached sym0: <895> port 0xa400-0xa4ff mem 0xec800000-0xec800fff,0xed000000-0xed0000ff irq 10 at device 15.0 on pci0 sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <VIA 8233 ATA100 controller> port 0xa000-0xa00f irq 0 at device 17.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xa000 ata0: mask=03 ostat0=50 ostat2=50 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=50 ata0-master: ATA 01 a5 ata0-slave: ATA 01 a5 ata0: devices=03 ata0: at 0x1f0 irq 14 on atapci1 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xa008 ata1: mask=03 ostat0=50 ostat2=50 ata1-master: ATAPI 00 00 ata1-slave: ATAPI 00 00 ata1: mask=03 stat0=50 stat1=50 ata1-master: ATA 01 a5 ata1-slave: ATA 01 a5 ata1: devices=03 ata1: at 0x170 irq 15 on atapci1 pci0: <VIA 83C572 USB controller> (vendor=0x1106, dev=0x3038) at 17.2 irq 12 pci0: <VIA 83C572 USB controller> (vendor=0x1106, dev=0x3038) at 17.3 irq 12 pci0: <VIA 83C572 USB controller> (vendor=0x1106, dev=0x3038) at 17.4 irq 12 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xd0000-0xd7fff,0xd8000-0xd87ff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000 psm0: current command byte:0067 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 50 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x0> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 2:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 3:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 4:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry ad0: success setting UDMA5 on VIA chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata0-master ad0: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 ad1: success setting UDMA5 on VIA chip Creating DISK ad1 ar: FreeBSD check1 failed ad1: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata0-slave ad1: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA100 ad1: piomode=4 dmamode=2 udmamode=5 cblid=1 ad2: success setting UDMA5 on VIA chip Creating DISK ad2 ar: FreeBSD check1 failed ad2: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata1-master ad2: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad2: 16 secs/int, 1 depth queue, UDMA100 ad2: piomode=4 dmamode=2 udmamode=5 cblid=1 ad3: success setting UDMA5 on VIA chip Creating DISK ad3 ar: FreeBSD check1 failed ad3: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata1-slave ad3: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad3: 16 secs/int, 1 depth queue, UDMA100 ad3: piomode=4 dmamode=2 udmamode=5 cblid=1 ad4: success setting UDMA5 on Promise chip Creating DISK ad4 ad5: success setting UDMA5 on Promise chip Creating DISK ad5 ad5: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata2-slave ad5: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad5: 16 secs/int, 1 depth queue, UDMA100 ad5: piomode=4 dmamode=2 udmamode=5 cblid=1 ad6: success setting UDMA5 on Promise chip Creating DISK ad6 ad7: success setting UDMA5 on Promise chip Creating DISK ad7 ad7: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata3-slave ad7: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad7: 16 secs/int, 1 depth queue, UDMA100 ad7: piomode=4 dmamode=2 udmamode=5 cblid=1 Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. sa0 at sym0 bus 0 target 14 lun 0 sa0: <SONY SDT-10000 0101> Removable Sequential Access SCSI-2 device sa0: Serial Number 0004702230 sa0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) pass0 at sym0 bus 0 target 14 lun 0 pass0: <SONY SDT-10000 0101> Removable Sequential Access SCSI-2 device pass0: Serial Number 0004702230 pass0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) Mounting root from ufs:/dev/ar0s1a no such device 'ar' setrootbyname failed ffs_mountroot: can't find rootvp Root mount failed: 6 Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:/dev/da0s1a ? List valid disk boot devices <empty line> Abort manual input mountroot> --- dmesg.releng46 ends here --- >Fix: none >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200207080926.g689QFj35063>