Date: Wed, 20 May 1998 15:55:16 -0600 From: "Justin T. Gibbs" <gibbs@plutotech.com> To: "Greg Rowe" <greg@uswest.net> Cc: "Justin T. Gibbs" <gibbs@plutotech.com>, scsi@FreeBSD.ORG Subject: Re: CAM and Adaptec 2940UW Rev E Message-ID: <199805202159.PAA29614@pluto.plutotech.com> In-Reply-To: Your message of "Wed, 20 May 1998 21:45:06 -0000." <9805202145.ZM12757@psv.oss.uswest.net>
next in thread | previous in thread | raw e-mail | index | archive | help
>Justin, > >The cards we are having problems with have a white barcode label over the 7880 >chip and are marked: > AHA-2940UW > 945300-01 E (We have 50 or 60 marked "C" and a 150 or so marked "D") > 9749 (We have a dozen or so marked "E" that all exhibit the problem >) I have C and A cards, but no E's. Can you mail me one? It might be good to have one of the drives you have reproduced this with as well. Justin T. Gibbs Pluto Technologies International Inc. 2511 55th. St. Boulder CO, 80301 > We added the printf statement as you requested, built and installed a new >kernel, and made a number of Iozone runs, but I don't think we ever recieved >the debug message you were looking for. This is from the last run we did >before the system crashed: > >File '/home/Bonnie.204', size: 1048576000 >Writing with putc()...May 20 16:11:21 test6 /kernel: (da1:ahc1:0:0:0): SCB 0x0 >- timed out in data >t phase, SCSISIGI == 0xe6 >May 20 16:11:39 test6 /kernel: SEQADDR == 0x115 >May 20 16:11:39 test6 /kernel: SSTAT1 == 0x13 If you placed the printf right next to these guys, why didn't it print? -- Justin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199805202159.PAA29614>