Date: Tue, 26 Jan 1999 13:21:58 -0800 From: Eric Hodel <hodeleri@seattleu.edu> To: Nicholas Vinen <hb@fl.net.au> Cc: questions@FreeBSD.ORG Subject: Re: Problem booting 3.0 kernel Message-ID: <36AE31F6.C90418D8@seattleu.edu> References: <199901261043.VAA23787@shell1.syd.fl.net.au>
next in thread | previous in thread | raw e-mail | index | archive | help
Nicholas Vinen wrote: > > UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU> Hi, I got a copy of the FreeBSD 3.0 CDROM to try it out. A couple of > weeks ago, I managed to boot it into install but was confused by the disk > slice editor so didn't install it. Ok. > Since then I have changed my setup > slightly and now I get a kernel page fault after the "Searching for ISA > devices...". Ok > I changed my network card to a 3c509 but I don't think this > is the problem. Try changing it back > I also changed my IDE setup with my ATAPI CDROM devices on > the motherboard IDE controller and my hard disk on an external IDE > controller. > FreeBSD 3.0 detects this PCI IDE controller fine but it still > seems to crash. I was wondering if this is a known problem or if there's a > newer kernel I can download and put onto a floppy so that I can continue > the installation? Not as a release, try pulling everything but the necessary hardware out, then putting them back in piece by piece until you find a solution. -- Eric Hodel hodeleri@seattleu.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36AE31F6.C90418D8>