From owner-freebsd-stable Sun Feb 3 0:27:50 2002 Delivered-To: freebsd-stable@freebsd.org Received: from rover.village.org (rover.bsdimp.com [204.144.255.66]) by hub.freebsd.org (Postfix) with ESMTP id 9E15737B402 for ; Sun, 3 Feb 2002 00:27:47 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.11.3/8.11.3) with ESMTP id g138Rko52538; Sun, 3 Feb 2002 01:27:46 -0700 (MST) (envelope-from imp@village.org) Received: from localhost (warner@rover2.village.org [10.0.0.1]) by harmony.village.org (8.11.6/8.11.6) with ESMTP id g138RjL16386; Sun, 3 Feb 2002 01:27:46 -0700 (MST) (envelope-from imp@village.org) Date: Sun, 03 Feb 2002 01:27:25 -0700 (MST) Message-Id: <20020203.012725.77322724.imp@village.org> To: archie@dellroad.org Cc: freebsd-stable@FreeBSD.ORG Subject: Re: New item for -stable UPDATING... From: "M. Warner Losh" In-Reply-To: <200202030319.g133Jbt13760@arch20m.dellroad.org> References: <200202030319.g133Jbt13760@arch20m.dellroad.org> X-Mailer: Mew version 2.1 on Emacs 21.1 / Mule 5.0 (SAKAKI) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In message: <200202030319.g133Jbt13760@arch20m.dellroad.org> Archie Cobbs writes: : After updating a 4.4-stable system to 4.5-REL, this happened : when trying to load linux.ko: : : link_elf: symbol seminfo undefined : : and the load failed... yes I did follow the instructions in UPDATING : relating to linux.ko. : : Apparenly now linux.ko links in with the semaphore stuff. The fix : was to add 'options SYSVSEM' to the kernel config file. Before it : only included SYSVSHM (which is the only one of the SYSV* options : actually required in order to run X I think). : : Could we add a note about this to UPDATING? Write one, and find out what the actual date of this new dependency was added. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 1: 5:42 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mail5.nc.rr.com (fe5.southeast.rr.com [24.93.67.52]) by hub.freebsd.org (Postfix) with ESMTP id AFF1137B416; Sun, 3 Feb 2002 01:05:33 -0800 (PST) Received: from i8k.babbleon.org ([66.57.85.154]) by mail5.nc.rr.com with Microsoft SMTPSVC(5.5.1877.687.68); Sat, 2 Feb 2002 23:08:11 -0500 Received: by i8k.babbleon.org (Postfix, from userid 111) id 13CEF407B; Sat, 2 Feb 2002 23:06:23 -0500 (EST) Content-Type: text/plain; charset="iso-8859-1" From: Brian T.Schellenberger To: Juha Saarinen Subject: Re: Junior Annoying Hacker Task Date: Sat, 2 Feb 2002 23:06:23 -0500 X-Mailer: KMail [version 1.3] Cc: Terry Lambert , Wilko Bulte , Paul Fardy , "current@FreeBSD.ORG" , "stable@FreeBSD.ORG" References: In-Reply-To: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020203040623.13CEF407B@i8k.babbleon.org> Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Saturday 02 February 2002 03:57 pm, Juha Saarinen wrote: > On Sat, 2 Feb 2002, Brian T.Schellenberger wrote: > > No, it's not, because it still maintains a separation between "system" > > control (rc.conf) and application control (/var/packges). > > > > It's more like config.sys or something . . . > > Much more than that. The registry also stores dynamic data, such as > performance counters. It's also "remotable", for centralised management. No, no, I was saying that *rc.conf* was more like config.sys than the registry. The registry is a huge monolithic monstor of an abomination from hell. Not that I don't like it or anything :-) -- Brian T. Schellenberger . . . . . . . bts@wnt.sas.com (work) Brian, the man from Babble-On . . . . bts@babbleon.org (personal) ME --> http://www.babbleon.org http://www.eff.org <-- GOOD GUYS --> http://www.programming-freedom.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 4:43: 3 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mail.ctonet.it (mail.ctonet.it [212.110.160.100]) by hub.freebsd.org (Postfix) with ESMTP id E72E237B404 for ; Sun, 3 Feb 2002 04:42:55 -0800 (PST) Received: from olgeni.olgeni (ppp-18.dial5.ctonet.it [212.110.180.18]) by mail.ctonet.it (Postfix) with ESMTP id EC5741237D; Sun, 3 Feb 2002 13:42:53 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by olgeni.olgeni (8.11.6/8.11.6) with ESMTP id g13Cgh084481; Sun, 3 Feb 2002 13:42:53 +0100 (CET) (envelope-from olgeni@uli.it) Date: Sun, 3 Feb 2002 13:42:43 +0100 (CET) From: Jimmy Olgeni X-X-Sender: olgeni@olgeni.olgeni To: Mahlon Cc: stable@FreeBSD.ORG Subject: Re: XMMS 1.2.6 port problem? In-Reply-To: <20020130183843.B651@martini.nu> Message-ID: <20020203133107.D6116-100000@olgeni.olgeni> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, 30 Jan 2002, Mahlon wrote: > Here's an excerpt. This is immediately after a 'make distclean && > make && make install' - which was completely clean and successful. > Note that there is no 'libxmms.so.2' in the work directory. I had the same problem. I recompiled xmms and got this error message when starting it: I forgot to recompile some xmms plugins which PORTREVISION was not bumped after the xmms upgrade. Just try to rebuild all your xmms plugins :o) -- jimmy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 5:22:16 2002 Delivered-To: freebsd-stable@freebsd.org Received: from energyhq.homeip.net (213-97-200-73.uc.nombres.ttd.es [213.97.200.73]) by hub.freebsd.org (Postfix) with ESMTP id 22BEE37B400; Sun, 3 Feb 2002 05:22:07 -0800 (PST) Received: from kajsa.energyhq.org (kajsa.energyhq.org [192.168.0.1]) by energyhq.homeip.net (Postfix) with SMTP id 53E8B3FC45; Sun, 3 Feb 2002 14:22:06 +0100 (CET) Date: Sun, 3 Feb 2002 14:21:30 +0100 From: Miguel Mendez To: Terry Lambert Cc: pdfardy@mac.com, current@freebsd.org, stable@freebsd.org Subject: Re: Junior Annoying Hacker Task Message-Id: <20020203142130.08333347.flynn@energyhq.homeip.net> In-Reply-To: <3C5BCDAE.22E25BAA@mindspring.com> References: <5F46C986-16DB-11D6-8CEC-00039359034A@mac.com> <3C5B3225.F04B9B18@mindspring.com> <20020202120725.A32535@energyhq.homeip.net> <3C5BCDAE.22E25BAA@mindspring.com> Organization: Energy, Inc X-Mailer: Sylpheed version 0.7.0 (GTK+ 1.2.10; i386--freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 02 Feb 2002 03:29:50 -0800 Terry Lambert wrote: Hi Terry et al, > Let me know the form you want the hierarchy to take, so > you can stick it into the GTK hierarchy thingy; I'll be > happy to crank out some quick yacc and lex code to do > the parsing of the file into that format for you. A > structure definition, with links, and how you want it > linked, would be ideal. 8-). I've been thinking about it and I'd like to provide two frontends, a GTK one and a ncurses one, what do you think? > > Something like: > > typedef enum _nodekind { > NK_VALUE, /* Path component */ > NK_KEY, /* Key */ > [.....] > struct node *child; > int intval; > char *strval; > struct wcval *wcval; > } u; > }; > It looks fine to me. Is your idea to manage rc.conf from there or maybe sysctl variables could be added too (once a working version of the rc.conf thing is made, of course). Cheers, -- Miguel Mendez - flynn@energyhq.homeip.net Public Key :: http://energyhq.homeip.net/files/pubkey.txt EnergyHQ :: http://energyhq.homeip.net FreeBSD - The power to serve! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 5:56:13 2002 Delivered-To: freebsd-stable@freebsd.org Received: from energyhq.homeip.net (213-97-200-73.uc.nombres.ttd.es [213.97.200.73]) by hub.freebsd.org (Postfix) with ESMTP id 341D337B400; Sun, 3 Feb 2002 05:56:06 -0800 (PST) Received: from kajsa.energyhq.org (kajsa.energyhq.org [192.168.0.1]) by energyhq.homeip.net (Postfix) with SMTP id 41E873FC45; Sun, 3 Feb 2002 14:56:07 +0100 (CET) Date: Sun, 3 Feb 2002 14:55:31 +0100 From: Miguel Mendez To: Dinesh Nair Cc: tlambert2@mindspring.com, pdfardy@mac.com, current@freebsd.org, stable@freebsd.org Subject: Re: Junior Annoying Hacker Task Message-Id: <20020203145531.34029926.flynn@energyhq.homeip.net> In-Reply-To: References: <20020202120725.A32535@energyhq.homeip.net> Organization: Energy, Inc X-Mailer: Sylpheed version 0.7.0 (GTK+ 1.2.10; i386--freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 3 Feb 2002 00:38:34 +0800 (MYT) Dinesh Nair wrote: Hi, > > times, well, not with the registry paradigm, but some sort of > > graphical admin tool based on GTK. I'm doing exams this week but may > > take a go at it after I finish them. > > why not use something like webmin ? webmin requires a web browser, 'foo' won't :) My idea is that it will work both on console (ncurses) and X (GTK), and because freedom of choice is a good thing. And I don't like webmin at all :-) Cheers, -- Miguel Mendez - flynn@energyhq.homeip.net Public Key :: http://energyhq.homeip.net/files/pubkey.txt EnergyHQ :: http://energyhq.homeip.net FreeBSD - The power to serve! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 6: 4: 5 2002 Delivered-To: freebsd-stable@freebsd.org Received: from nikita.theblinis.net (nikita.theblinis.net [62.212.96.132]) by hub.freebsd.org (Postfix) with ESMTP id 1B03637B416 for ; Sun, 3 Feb 2002 06:04:00 -0800 (PST) Received: from vaio (vaio [192.168.0.16]) by nikita.theblinis.net (8.11.6/8.11.3) with SMTP id g13E43b12823 for ; Sun, 3 Feb 2002 15:04:04 +0100 (CET) (envelope-from admin@optogone.com) Message-ID: <001101c1acbb$9e7c69a0$1000a8c0@vaio> From: "Michel Gravey" To: Subject: Onstream DI30 tape Date: Sun, 3 Feb 2002 15:03:54 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I have problem using the adr di30 tape. Freebsd recognizes it as ast0: TAPE at ata1-master using PIO4 Any write/erase command give messages like this ast0: WARNING: CTL exceeded 65536>32768 ast0: SPACE - ILLEGAL REQUEST asc=20 ascq=00 error=04 ast0: WRITE - ILLEGAL REQUEST asc=24 ascq=00 error=04 ast0: SPACE - ILLEGAL REQUEST asc=20 ascq=00 error=04 ast0: WRITE - ILLEGAL REQUEST asc=24 ascq=00 error=04 ast0: ERASE - ILLEGAL REQUEST asc=20 ascq=00 error=04 I use flexbakup and I'm running FreeBSD 4.5 stable. mt -f /dev/nrast0 erase mt: /dev/nrast0: erase: Input/output error optogone# Feb 3 15:02:34 optogone /kernel: ast0: ERASE - ILLEGAL REQUEST asc=20 ascq=00 error=04 Thanks in advance, Michel Gravey mailto: admin@optogone.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 6:19:59 2002 Delivered-To: freebsd-stable@freebsd.org Received: from vortex.wa4phy.net (pcp419987pcs.martnz01.ga.comcast.net [68.47.18.240]) by hub.freebsd.org (Postfix) with ESMTP id 59F6337B419; Sun, 3 Feb 2002 06:19:47 -0800 (PST) Received: from vortex.wa4phy.net (localhost.wa4phy.net [127.0.0.1]) by vortex.wa4phy.net (8.11.6/8.11.6) with ESMTP id g13EJkU01725; Sun, 3 Feb 2002 09:19:46 -0500 (EST) (envelope-from sam@wa4phy.net) Message-ID: <3C5D4702.661789BA@vortex.wa4phy.net> Date: Sun, 03 Feb 2002 09:19:46 -0500 From: Sam Organization: You Gotta Be Kiddin! X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.5-STABLE i386) X-Accept-Language: en, ja MIME-Version: 1.0 To: freebsd-questions@freebsd.org Cc: freebsd-stable@freebsd.org Subject: Normal behavior? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'd appreciate some clarification about the behavior of the softupdates as it relates to disk writes. Situation: Have noticed that during an ftp session with relatively high (150 Kbs) data stream, I notice after what appears to be a short burst, i.e., 130 packets (viewed with systat -vm) there is a considerable delay before the next batch. Graphicaly viewing thruput with xsysinfo, I watch the disk write for each "batch", but while the write is happening, there appears to be a significant delay before the next packet stream is graphicaly displayed. Is this a function of softupdates, combined with the fact that the ATA drive has to be serviced by the processor, and the switcher can't service two things at once, or what. How often does the data that needs to be written actually get written to the disk, or do I misunderstand how softupdates works? Essentially, what it appears to me that is happening, is the packet stream is "suspended" while the disk is being written to. Is that a correct assumption? Since softupdates is on by default now, what damage would I do if I turned it off? Is that to my best interest? Thanks.. Sam -- Just because you're moving fast | BURMA SHAVE doesn't mean that you're really | going anwhere at all! | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 7:18:54 2002 Delivered-To: freebsd-stable@freebsd.org Received: from buscaeltesoro.com (imail5.innerhost.com [208.238.102.7]) by hub.freebsd.org (Postfix) with ESMTP id 6DF2437B400 for ; Sun, 3 Feb 2002 07:18:47 -0800 (PST) Date: Sun, 3 Feb 2002 10:17:30 -0500 Message-Id: <200202031017.AA508231742@buscaeltesoro.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii From: "Saulo Gil" Reply-To: To: Subject: Problem with PPPoE and 3com Etherlink III X-Mailer: Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG People, With FreeBSD 4.5-RELEASE i can't connect to the internet using (userland) ppp. I use the same configuration in the past, but with this network card (ISA 3Com EtherLink III), ppp says: Feb 2 14:00:01 dna ppp[132]: tun0: Phase: deflink: Connected! Feb 2 14:00:01 dna ppp[132]: tun0: Phase: deflink: opening -> dial Feb 2 14:00:01 dna ppp[132]: tun0: Phase: deflink: dial -> carrier Feb 2 14:00:06 dna ppp[132]: tun0: Phase: deflink: Disconnected! Feb 2 14:00:06 dna ppp[132]: tun0: Phase: deflink: carrier -> hangup Feb 2 14:00:06 dna ppp[132]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out Feb 2 14:00:06 dna ppp[132]: tun0: Phase: deflink: : 0 packets in, 0 packets out Feb 2 14:00:06 dna ppp[132]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sat Feb 2 14:00:06 2002 Feb 2 14:00:06 dna ppp[132]: tun0: Phase: deflink: hangup -> opening Feb 2 14:00:06 dna ppp[132]: tun0: Phase: deflink: Enter pause (30) for redialing. Please help me. Thank you PD: sorry for my english ppp.conf: --------- default: set log phase tun command set device PPPoE:ep0 set mru 1492 set mtu 1492 set authname gastonq@speedy set authkey lakers set dial set login add default HISADDR enable dns dmesg output: ------------- Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-RELEASE #2: Sat Feb 2 01:11:41 ART 2002 root@dna.speedy.com.ar:/usr/src/sys/compile/my_kernel Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P55C (233.87-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x543 Stepping = 3 Features=0x8001bf real memory = 33554432 (32768K bytes) avail memory = 29122560 (28440K bytes) Preloaded elf kernel "kernel" at 0xc039d000. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 isab0: at device 1.0 on pci0 isa0: on isab0 atapci0: port 0x4000-0x400f,0x184a8e7c-0x184a8e7f,0x86034d58-0x86034d5f,0x9cc6a274-0x9cc6a277,0x451ef080-0x451ef087 irq 0 at device 1.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at 11.0 irq 0 pci0: at 20.0 irq 0 orm0: However, I have previously thought that a system that used xml files to store application configs (that would then be used to generate valid conf files) would be useful. It would allow gui tools to be easily designed for system administration. Cheers, Andrew > > Terry Lambert types: > > I guess NIH beats an idea to death, even if the original > > implementation bears no resemblence to the current one. > > The problem with the registry is not that it's a single place that > tries to control everything. The problem with the registry is that you > have to have a large chunk of the system functioning in order to fix > things in it should it break - which, from what I've seen, happens all > to frequently. Compare this to unix, where all you need is the kernel, > init, sh and ed - and sufficiently clever people may be able to do it > without init. > > I offer AIX as an example. IBM decided that all those silly flat text > files in Unix was a bad idea and replaced them with object > database. They didn't put everything in one big file like Windows > does, but grouped them "logically", meaning the grouping was unrelated > to the flat text files unix admins used to know. Of course, each > different db used a different command, with a different syntax, to > edit the db. I guess if you're going to make old knowledge useless, > you might as well be thorough about it. > > What this meant in practical terms was that fixing the system required > all the db mechanisms to be working, plus either the man pages or > menu-driven admin tool to be working in order to fix a broken system. > > And that was one of the better features of AIX. > > Juha Saarinen types: > > On Sat, 2 Feb 2002, Brian T.Schellenberger wrote: > > Then again, the registry is the epitome of all that's counter-intuitive, > > awkward and generally oh-why-does-it-have-to-be-like-this. > Maybe it should > > be ported to FreeBSD? ;-)))) > > I haven't followed the thread, so apologies if this is repeated. I > think having menu-driven front end for editing *.conf files - right > now, that would be rc, make, pccard and periodic - isn't such a bad > idea. Nothing about the current behavior needs to change. It's no > worse than letting people use the sysinstall disk management subsystem > rather than fdisk and disklabel. > > Ideally, it would read all of /etc/defaults/*.conf for a description > of each such file. When you chose to edit that file, it would read the > contents for the list of variables and what they do - in the comments > - along with the default values, then get the current values from the > appropriate file in /etc. That means the tool doesn't get out of sync > with the files - except for maybe make.conf. It would require > reworking the comments in the files in /etc/defaults, and a little > more discipline in editing them, but that's not necessarily a bad > thing. > > -- > Mike Meyer http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 18:18:27 2002 Delivered-To: freebsd-stable@freebsd.org Received: from rover.village.org (rover.bsdimp.com [204.144.255.66]) by hub.freebsd.org (Postfix) with ESMTP id E968437B41C for ; Sun, 3 Feb 2002 18:18:21 -0800 (PST) Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.11.3/8.11.3) with ESMTP id g142IKi01235; Sun, 3 Feb 2002 19:18:20 -0700 (MST) (envelope-from imp@village.org) Received: from localhost (warner@rover2.village.org [10.0.0.1]) by harmony.village.org (8.11.6/8.11.6) with ESMTP id g142IJL20223; Sun, 3 Feb 2002 19:18:19 -0700 (MST) (envelope-from imp@village.org) Date: Sun, 03 Feb 2002 19:17:58 -0700 (MST) Message-Id: <20020203.191758.96919906.imp@village.org> To: michaelnottebrock@gmx.net Cc: stable@FreeBSD.ORG Subject: Re: dropping 127.* on the floor From: "M. Warner Losh" In-Reply-To: <3C5DE578.4020409@gmx.net> References: <20020203152433.A5932-100000@voyager.straynet.com> <3C5DE578.4020409@gmx.net> X-Mailer: Mew version 2.1 on Emacs 21.1 / Mule 5.0 (SAKAKI) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In message: <3C5DE578.4020409@gmx.net> Michael Nottebrock writes: : Greg Prosser wrote: : : > FWIW, my problem was a change in the ip stack. : > : > We now drop 127.* packets on the floor if they come in across an interface : > that is not lo0. Since ipnat redirect rules happen below the ip stack, : > packets which are rewritten by ipnat to use a 127.* address get dropped on : > the floor when they enter the stack. ipnat records the redirect as having : > worked, but the packet just disappears silently. This totally breaks : > my transparent proxy, as I forward the connections to 127.0.0.1 via ipnat. : : : Ugh. This probably means that transparent squid proxying will also break : and _that_ scares me (no touchy cvsup for my -STABLE box). You might : want to contact the committer about this. It is certainly looking like this change will be backed out. It is well intended, but breaks too many things. :-( Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 18:37:37 2002 Delivered-To: freebsd-stable@freebsd.org Received: from voyager.straynet.com (voyager.straynet.com [208.185.24.8]) by hub.freebsd.org (Postfix) with ESMTP id D5D6637B42B for ; Sun, 3 Feb 2002 18:37:15 -0800 (PST) Received: by voyager.straynet.com (Postfix, from userid 1001) id 354C92069B; Sun, 3 Feb 2002 21:35:53 -0500 (EST) Received: from localhost (localhost [127.0.0.1]) by voyager.straynet.com (Postfix) with ESMTP id 19E4318C97; Sun, 3 Feb 2002 21:35:53 -0500 (EST) Date: Sun, 3 Feb 2002 21:35:53 -0500 (EST) From: Greg Prosser X-X-Sender: Reply-To: Greg Prosser To: "M. Warner Losh" Cc: , Subject: Re: dropping 127.* on the floor In-Reply-To: <20020203.191758.96919906.imp@village.org> Message-ID: <20020203213338.V12914-100000@voyager.straynet.com> X-Sysadmin-Nolife: True X-BOFH: Yes MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I just tested myself with the squid way of doing things (ipfw instead of ipf), and it also affects that. Looks like transparent squid proxying is now hosed, fun. Point of note, it seems -RELEASE is not affected by this, which is a good sign. Should I send a private mail to the commiter, or is it being taken care of? -gnp on Sun, 3 Feb 2002, M. Warner Losh babbled .. ;; In message: <3C5DE578.4020409@gmx.net> ;; Michael Nottebrock writes: ;; : Greg Prosser wrote: ;; : ;; : > FWIW, my problem was a change in the ip stack. ;; : > ;; : > We now drop 127.* packets on the floor if they come in across an interface ;; : > that is not lo0. Since ipnat redirect rules happen below the ip stack, ;; : > packets which are rewritten by ipnat to use a 127.* address get dropped on ;; : > the floor when they enter the stack. ipnat records the redirect as having ;; : > worked, but the packet just disappears silently. This totally breaks ;; : > my transparent proxy, as I forward the connections to 127.0.0.1 via ipnat. ;; : ;; : ;; : Ugh. This probably means that transparent squid proxying will also break ;; : and _that_ scares me (no touchy cvsup for my -STABLE box). You might ;; : want to contact the committer about this. ;; ;; It is certainly looking like this change will be backed out. It is ;; well intended, but breaks too many things. :-( To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 18:59: 1 2002 Delivered-To: freebsd-stable@freebsd.org Received: from cumin.apnic.net (cumin.apnic.net [202.12.29.59]) by hub.freebsd.org (Postfix) with ESMTP id 7F7FF37B405 for ; Sun, 3 Feb 2002 18:58:57 -0800 (PST) Received: from hadrian.staff.apnic.net (hadrian.apnic.net [202.12.29.249]) by cumin.apnic.net (8.12.1/8.12.1) with ESMTP id g142rnKa017172 for ; Mon, 4 Feb 2002 12:53:50 +1000 Received: (from ggm@localhost) by hadrian.staff.apnic.net (8.9.3/8.9.3) id MAA02792 for freebsd-stable@freebsd.org; Mon, 4 Feb 2002 12:58:54 +1000 (EST) Message-Id: <200202040258.MAA02792@hadrian.staff.apnic.net> From: ggm@apnic.net (George Michaelson) To: freebsd-stable@freebsd.org Date: Mon, 4 Feb 2002 12:56 EST Subject: how to tell the kernel to use mfs in loader Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 X-Scanned-By: MIMEDefang 2.1 (www dot roaringpenguin dot com slash mimedefang) Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am trying to install FreeBSD 4.5 on a laptop with no floppy or CD. I have copied the install kernel/mfsroot image off a floppy via vnconfig but even with the minimalist loader.rc I am finding the install kernel mounts my hard disk root, not the MFS root Its been given in memory. What can I do in loader phase to tell a kernel to use MFSROOT as the only image? I suspect the install kernel is 'smart' - Sees a valid FS on the disk and is using it for its init path. cheers -George To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 19:13:39 2002 Delivered-To: freebsd-stable@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id 1DD1F37B41A for ; Sun, 3 Feb 2002 19:13:36 -0800 (PST) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id TAA10086; Sun, 3 Feb 2002 19:13:26 -0800 Message-ID: <3C5DFC55.3040200@owt.com> Date: Sun, 03 Feb 2002 19:13:25 -0800 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4) Gecko/20011128 Netscape6/6.2.1 X-Accept-Language: en-us MIME-Version: 1.0 To: Mike Meyer Cc: stable@FreeBSD.ORG Subject: Re: Problems with SiS900 on S7K5A References: <15453.48613.12001.228683@guru.mired.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Mike Meyer wrote: > I finally got around to upgrading my ECS S7K5A system to include the > patches for the SiS 735 chipset it uses. Everything seemed to be > working fine, so I pulled the fxp for use elsewhere. > > At which point problems start appearing. In particular, it seems like > network activity just stops every so often. Sometimes in minutes, > sometimes in days. Originally I thought it was related to running out > of mbufs, which I was doing, but the last time it happened netstat -m > reported "0 requests for memory denied" and ditto for delayed. Taking > the interface down and back up doesn't solve the problem. Rebooting > does. > > I realize I should have grabbed the status for the card while it was > down, but forgot, and have to leave for a couple of hours in about 10 > minutes. So I'm going to ask for suggestions about what I should > collect the next time this problem happens so that I can give a > reasonable report. Ditto for suggestions on actions to take to try > curing this symptom without having to reboot it that might provide > clues to solving the problem. What kind of connection do you have? I have one of the asymmetric DSL setups (768/128 on demand). I have downloaded 101 MB of the 4.5-iso and I have seen two stalls. I also see the stalls on other NICs. I have also been told that the stalls are the nature of the beast when you go with the asymmetric setup. Kent -- Kent Stewart Richland, WA mailto:kbstew99@hotmail.com http://users.owt.com/kstewart/index.html FreeBSD News http://daily.daemonnews.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 19:31:52 2002 Delivered-To: freebsd-stable@freebsd.org Received: from bunrab.catwhisker.org (adsl-63-193-123-122.dsl.snfc21.pacbell.net [63.193.123.122]) by hub.freebsd.org (Postfix) with ESMTP id 77CE037B405 for ; Sun, 3 Feb 2002 19:31:47 -0800 (PST) Received: (from david@localhost) by bunrab.catwhisker.org (8.11.6/8.11.6) id g143Vlf54932; Sun, 3 Feb 2002 19:31:47 -0800 (PST) (envelope-from david) Date: Sun, 3 Feb 2002 19:31:47 -0800 (PST) From: David Wolfskill Message-Id: <200202040331.g143Vlf54932@bunrab.catwhisker.org> To: freebsd-stable@FreeBSD.ORG, ggm@apnic.net Subject: Re: how to tell the kernel to use mfs in loader In-Reply-To: <200202040258.MAA02792@hadrian.staff.apnic.net> Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >From: ggm@apnic.net (George Michaelson) >Date: Mon, 4 Feb 2002 12:56 EST >I am trying to install FreeBSD 4.5 on a laptop with no floppy or CD. >... I suspect that one of the easier ways to do this (relatively speaking) would be to remove the disk drive from the laptop and attach that drive to a different machine (such as a desktop, via an adaptor). Once FreeBSD is installed on the drive, move it back. Of course, this presumes that you have such a machine available (even if only temporarily). Cheers, david (links to my resume at http://www.catwhisker.org/~david) -- David H. Wolfskill david@catwhisker.org I believe it would be irresponsible (and thus, unethical) for me to advise, recommend, or support the use of any product that is or depends on any Microsoft product for any purpose other than personal amusement. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 19:40: 5 2002 Delivered-To: freebsd-stable@freebsd.org Received: from cumin.apnic.net (cumin.apnic.net [202.12.29.59]) by hub.freebsd.org (Postfix) with ESMTP id 949FC37B41A for ; Sun, 3 Feb 2002 19:40:01 -0800 (PST) Received: from apnic.net (hadrian.apnic.net [202.12.29.249]) by cumin.apnic.net (8.12.1/8.12.1) with ESMTP id g143YoKa018949; Mon, 4 Feb 2002 13:34:50 +1000 To: David Wolfskill Cc: freebsd-stable@FreeBSD.ORG Subject: Re: how to tell the kernel to use mfs in loader In-reply-to: Your message of "Sun, 03 Feb 2002 19:31:47 -0800." <200202040331.g143Vlf54932@bunrab.catwhisker.org> Date: Mon, 04 Feb 2002 13:39:54 +1000 Message-ID: <5447.1012793994@apnic.net> From: George Michaelson X-Scanned-By: MIMEDefang 2.1 (www dot roaringpenguin dot com slash mimedefang) Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Tnaks David, if all I wanted to do was install, Indeed I would hack or better yet, wait until tomorrow when I can get my CD drive. I'm more interested in how I can tell the boot-time loader process to tell the kernel not to auto-mount the root device from hard disk, when it has a perfectly good mfsroot image I just wrote into memory! -George To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 20: 5:47 2002 Delivered-To: freebsd-stable@freebsd.org Received: from guru.mired.org (dsl-64-192-6-133.telocity.com [64.192.6.133]) by hub.freebsd.org (Postfix) with SMTP id A421D37B41D for ; Sun, 3 Feb 2002 20:05:39 -0800 (PST) Received: (qmail 2360 invoked by uid 100); 4 Feb 2002 04:05:33 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15454.2188.704492.430142@guru.mired.org> Date: Sun, 3 Feb 2002 22:05:32 -0600 To: Cc: "Mike Meyer" , "Terry Lambert" , "Juha Saarinen" , "Brian T.Schellenberger" , "Wilko Bulte" , "Paul Fardy" , , Subject: RE: Junior Annoying Hacker Task In-Reply-To: References: <15452.50112.625066.914576@guru.mired.org> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ From: "Mike Meyer" X-Delivery-Agent: TMDA/0.44 (Python 2.2; freebsd-4.5-STABLE-i386) Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG [Context lost to top posting.] Andrew Cowan types: > > How about editing the rc.conf file from the proposed virc program, that > would then re-generate the rc.conf file upon saving. Of course the virc > would store the underlying configuration in an xml config file.. That > should make Kutulu very happy :) I think it should be called viconf, as it should work on rc.conf, make.conf, periodic.conf, and any other .conf files we want. > I didn't take you seriously, except about the name. > However, I have previously thought that a system that used xml files to > store application configs (that would then be used to generate valid conf > files) would be useful. It would allow gui tools to be easily designed for > system administration. I don't see how it would make it any easier than using flat text files, unless you're planning on providing a DTD and using generic XML gui editors. Putting data in XML doesn't automatically imbue it with anything, except the ability to use generic XML tools on it. Of course, given line-seperated records with a unique field separator, you can use generic tools on those just as well. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 20:18:28 2002 Delivered-To: freebsd-stable@freebsd.org Received: from guru.mired.org (dsl-64-192-6-133.telocity.com [64.192.6.133]) by hub.freebsd.org (Postfix) with SMTP id 386BB37B41A for ; Sun, 3 Feb 2002 20:18:20 -0800 (PST) Received: (qmail 2504 invoked by uid 100); 4 Feb 2002 04:18:17 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15454.2953.418521.487837@guru.mired.org> Date: Sun, 3 Feb 2002 22:18:17 -0600 To: Kent Stewart Cc: stable@FreeBSD.ORG Subject: Re: Problems with SiS900 on S7K5A In-Reply-To: <3C5DFC55.3040200@owt.com> References: <15453.48613.12001.228683@guru.mired.org> <3C5DFC55.3040200@owt.com> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ From: "Mike Meyer" X-Delivery-Agent: TMDA/0.44 (Python 2.2; freebsd-4.5-STABLE-i386) Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Kent Stewart types: > What kind of connection do you have? I have one of the asymmetric DSL > setups (768/128 on demand). I have downloaded 101 MB of the 4.5-iso > and I have seen two stalls. I also see the stalls on other NICs. I > have also been told that the stalls are the nature of the beast when > you go with the asymmetric setup. I don't think that's the problem. I've got a DSL modem plugged into a "Cable/DSL Router", and several boxes plugged into that. When the SiS stalls, connetions to all the local boxes fail as well. I.e. - I can't connect to the DSL Modem, the Cable/DSL Router, or the other local computers. None of the other local boxes seem to have any problems at that time. Thanx, http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 20:30:38 2002 Delivered-To: freebsd-stable@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id 3D32837B41B for ; Sun, 3 Feb 2002 20:30:35 -0800 (PST) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id UAA13476; Sun, 3 Feb 2002 20:30:27 -0800 Message-ID: <3C5E0E61.1020505@owt.com> Date: Sun, 03 Feb 2002 20:30:25 -0800 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4) Gecko/20011128 Netscape6/6.2.1 X-Accept-Language: en-us MIME-Version: 1.0 To: Mike Meyer Cc: stable@FreeBSD.ORG Subject: Re: Problems with SiS900 on S7K5A References: <15453.48613.12001.228683@guru.mired.org> <3C5DFC55.3040200@owt.com> <15454.2953.418521.487837@guru.mired.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Mike Meyer wrote: > Kent Stewart types: > >>What kind of connection do you have? I have one of the asymmetric DSL >>setups (768/128 on demand). I have downloaded 101 MB of the 4.5-iso >>and I have seen two stalls. I also see the stalls on other NICs. I >>have also been told that the stalls are the nature of the beast when >>you go with the asymmetric setup. >> > > I don't think that's the problem. I've got a DSL modem plugged into a > "Cable/DSL Router", and several boxes plugged into that. When the SiS > stalls, connetions to all the local boxes fail as well. I.e. - I can't > connect to the DSL Modem, the Cable/DSL Router, or the other local > computers. None of the other local boxes seem to have any problems at > that time. I am not seeing the lack of connect to the modem. Since all of the systems are cross connected, I probably can't tell. My download finally died at 202 MB because I filled /. Kent -- Kent Stewart Richland, WA mailto:kbstew99@hotmail.com http://users.owt.com/kstewart/index.html FreeBSD News http://daily.daemonnews.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 21:38:52 2002 Delivered-To: freebsd-stable@freebsd.org Received: from creme-brulee.marcuscom.com (rdu57-28-046.nc.rr.com [66.57.28.46]) by hub.freebsd.org (Postfix) with ESMTP id 63FCA37B405 for ; Sun, 3 Feb 2002 21:38:49 -0800 (PST) Received: from shumai.marcuscom.com (marcus@shumai.marcuscom.com [192.168.1.4]) by creme-brulee.marcuscom.com (8.11.6/8.11.6) with ESMTP id g145btm20915; Mon, 4 Feb 2002 00:37:55 -0500 (EST) (envelope-from marcus@marcuscom.com) Subject: Re: Apple HFS filesystem mountable? From: Joe Clarke To: "Bas v.d. Wiel" Cc: stable@FreeBSD.ORG In-Reply-To: References: Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Evolution/1.0.2 Date: 04 Feb 2002 00:38:50 -0500 Message-Id: <1012801131.35499.4.camel@shumai.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 2002-02-03 at 19:17, Bas v.d. Wiel wrote: > Hi all, > After experimenting with Netatalk/Samba as a server for a mixed environment > with NT and Mac clients I started wondering whether I could mount Mac HFS > volumes. It'd be nice to have this option for serving the occasional HFS-CD, > nothing mission-critical really. The ports collection doesn't give any > convincing HFS support, neither does a search on Google. It did turn out > that Linux supports HFS but I prefer BSD. There are two ports, /usr/ports/emulators/hfs, and /usr/ports/emulators/hfsutils that give you some degree of HFS compatibility. > Is there a 'mount' command that lets me hook HFS disks up to my unix > filesystem? If not, are there any plans to create such an option? Will we > see it anytime soon in -STABLE? I don't know much about Mac OS X, but I'd > guess it doesn't use traditional HFS so maybe my question is rapidly > becoming redundant.. Mac OS X uses HFS+, and I'm not sure if the HFS ports support this. OS X can also use good old UFS, but most people don't use that since it's not compatible with Classic. > If nothing works, I can still pump the CD's across the LAN to my Netatalk > test server which does an abolutely wonderful job, coexists nicely with > Samba 2.2.2 and is rock solid. I'm growing more and more fond of FreeBSD > every day!! The Netatalk project is always looking for ways to improve. It's good to hear you're having a positive experience. Joe > > Bas > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 21:47:57 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mail-ns01s0.ns.sympatico.ca (smtp1.ns.sympatico.ca [142.177.1.91]) by hub.freebsd.org (Postfix) with ESMTP id 8B39437B419 for ; Sun, 3 Feb 2002 21:47:55 -0800 (PST) Received: from winnt ([142.177.18.123]) by mail-ns01s0.ns.sympatico.ca (Post.Office MTA v3.5.3 release 223 ID# 0-68925U141000L141000S0V35) with SMTP id ca for ; Mon, 4 Feb 2002 01:49:29 -0400 Reply-To: From: "marc cormier" To: Subject: Date: Mon, 4 Feb 2002 00:44:05 -0400 Message-ID: <000001c1ad40$dc0c2460$2486290a@wolf> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Feb 3 22:42:59 2002 Delivered-To: freebsd-stable@freebsd.org Received: from hsd.com.au (CPE-144-132-42-44.vic.bigpond.net.au [144.132.42.44]) by hub.freebsd.org (Postfix) with ESMTP id E6E1537B41C for ; Sun, 3 Feb 2002 22:42:47 -0800 (PST) Received: from ariel by hsd.com.au with SMTP (MDaemon.v3.0.1.R) for ; Mon, 04 Feb 2002 17:42:09 +1100 Reply-To: From: "Andrew Cowan" To: "Mike Meyer" Cc: "Mike Meyer" , "Terry Lambert" , "Juha Saarinen" , "Brian T.Schellenberger" , "Wilko Bulte" , "Paul Fardy" , , Subject: RE: Junior Annoying Hacker Task Date: Mon, 4 Feb 2002 17:42:08 +1100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal In-Reply-To: <15454.2188.704492.430142@guru.mired.org> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-MDaemon-Deliver-To: stable@FreeBSD.ORG X-Return-Path: andrew.cowan@hsd.com.au X-MDRcpt-To: stable@FreeBSD.ORG Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > I don't see how it would make it any easier than using flat text > files, unless you're planning on providing a DTD and using generic XML > gui editors. Putting data in XML doesn't automatically imbue it with > anything, except the ability to use generic XML tools on it. Of > course, given line-seperated records with a unique field separator, > you can use generic tools on those just as well. I was thinking of XML as there would be a huge war in choosing the 'unique field separator' :) XML is somewhat a standard nowdays - even though it is somewhat stupid. > -- > Mike Meyer http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 2:45: 3 2002 Delivered-To: freebsd-stable@freebsd.org Received: from web14802.mail.yahoo.com (web14802.mail.yahoo.com [216.136.224.218]) by hub.freebsd.org (Postfix) with SMTP id A711937B428 for ; Mon, 4 Feb 2002 02:44:39 -0800 (PST) Message-ID: <20020204104439.75057.qmail@web14802.mail.yahoo.com> Received: from [203.121.0.15] by web14802.mail.yahoo.com via HTTP; Mon, 04 Feb 2002 02:44:39 PST Date: Mon, 4 Feb 2002 02:44:39 -0800 (PST) From: Webcraft Subject: 4.5 buildworld failure: libfetch To: freebsd-stable@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Can someone please inform me what configs or setting do I have that leads to the following 'buildworld' error? I have upgraded a similar box from 4.4 to 4.5 with no hitch, but this one keeps failing at the same point. Even blown away /usr/src and /usr/obj but to no avail. Any help is appreciated Thank you Feisal http://www.webcraft99.com ----------- ===> libfetch cc -O -pipe -march=pentiumpro -I. -DINET6 -I/usr/obj/usr/src/i386/usr/include -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Wno-uninitialized -Werror -Wreturn-type -Wcast-qual -Wwrite-strings -Wswitch -Wshadow -c /usr/src/lib/libfetch/fetch.c -o fetch.o cc -O -pipe -march=pentiumpro -I. -DINET6 -I/usr/obj/usr/src/i386/usr/include -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Wno-uninitialized -Werror -Wreturn-type -Wcast-qual -Wwrite-strings -Wswitch -Wshadow -c /usr/src/lib/libfetch/common.c -o common.o cc1: warnings being treated as errors /usr/src/lib/libfetch/common.c: In function `_fetch_putln': /usr/src/lib/libfetch/common.c:343: warning: cast discards qualifiers from pointer target type /usr/src/lib/libfetch/common.c:345: warning: cast discards qualifiers from pointer target type *** Error code 1 Stop in /usr/src/lib/libfetch. *** Error code 1 Stop in /usr/src/lib. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. __________________________________________________ Do You Yahoo!? Great stuff seeking new owners in Yahoo! Auctions! http://auctions.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 3: 1: 0 2002 Delivered-To: freebsd-stable@freebsd.org Received: from thor.inter.net.il (thor.inter.net.il [192.114.186.11]) by hub.freebsd.org (Postfix) with ESMTP id CEFB337B400 for ; Mon, 4 Feb 2002 03:00:56 -0800 (PST) Received: from pcsysadmin ([192.114.169.162]) by thor.inter.net.il (Mirapoint) with SMTP id AFY05202; Mon, 4 Feb 2002 13:00:53 +0200 (IST) Message-ID: <000701c1ad6b$d56a6470$6601010a@pcsysadmin> From: "Rostislav" To: Subject: samba package Date: Mon, 4 Feb 2002 13:05:18 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I just installed my new 4.5R box using the official CDs. It looks very strange but I can't find any samba package in any of 4 CDs? Does someone have any idea why the package wasn't included to CDs? In contrast, the samba package exist in ftp. Thanks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 3:18:52 2002 Delivered-To: freebsd-stable@freebsd.org Received: from HAL9000.wox.org (12-232-222-90.client.attbi.com [12.232.222.90]) by hub.freebsd.org (Postfix) with ESMTP id 86A7D37B422; Mon, 4 Feb 2002 03:18:46 -0800 (PST) Received: (from das@localhost) by HAL9000.wox.org (8.11.6/8.11.6) id g14BJJh18015; Mon, 4 Feb 2002 03:19:19 -0800 (PST) (envelope-from das) Date: Mon, 4 Feb 2002 03:19:19 -0800 From: David Schultz To: Miguel Mendez Cc: Terry Lambert , pdfardy@mac.com, current@FreeBSD.ORG, stable@FreeBSD.ORG Subject: Re: Junior Annoying Hacker Task Message-ID: <20020204031919.A17666@HAL9000.wox.org> Mail-Followup-To: Miguel Mendez , Terry Lambert , pdfardy@mac.com, current@FreeBSD.ORG, stable@FreeBSD.ORG References: <5F46C986-16DB-11D6-8CEC-00039359034A@mac.com> <3C5B3225.F04B9B18@mindspring.com> <20020202120725.A32535@energyhq.homeip.net> <3C5BCDAE.22E25BAA@mindspring.com> <20020203142130.08333347.flynn@energyhq.homeip.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020203142130.08333347.flynn@energyhq.homeip.net>; from flynn@energyhq.homeip.net on Sun, Feb 03, 2002 at 02:21:30PM +0100 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thus spake Miguel Mendez : > On Sat, 02 Feb 2002 03:29:50 -0800 > Terry Lambert wrote: > > Hi Terry et al, > > > Let me know the form you want the hierarchy to take, so > > you can stick it into the GTK hierarchy thingy; I'll be > > happy to crank out some quick yacc and lex code to do > > the parsing of the file into that format for you. A > > structure definition, with links, and how you want it > > linked, would be ideal. 8-). > > I've been thinking about it and I'd like to provide two frontends, a GTK one and a ncurses one, what do you think? This is getting pretty ambitious. I'm not about to say that a procedural interface to rc.conf wouldn't be nice, or that it couldn't be done well, but when it comes down to it, what problem are we trying to solve? Certainly rc.conf supports a lot of options, and a hierarchical arrangement would simplify things. However, most people only need to deal with a small subset of the options, and organization doesn't seem to be a big issue. Of course there's also the possibility that someone could leave out a quotation mark and end up with a non-working system, but that's rare and solvable with simpler tools, as has been discussed. Besides, both Microsoft and the linuxconf people have done far worse than rc.conf---especially Microsoft. Know what to do when a bad update eats a VXD that isn't on the Windows CD? :P [I'm not subscribed to -current, so please CC me any replies if that's where this thread has drifted.] To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 4:20:38 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mail.the-i-pa.com (mail.the-i-pa.com [151.201.71.132]) by hub.freebsd.org (Postfix) with SMTP id 8FDED37B405 for ; Mon, 4 Feb 2002 04:20:32 -0800 (PST) Received: (qmail 24736 invoked from network); 4 Feb 2002 12:25:41 -0000 Received: from unknown (HELO proxy.pt.com) (151.201.71.209) by mail.the-i-pa.com with SMTP; 4 Feb 2002 12:25:41 -0000 Content-Type: text/plain; charset="CP 1252" From: Bill Moran Organization: Potential Technology To: "Rostislav" , Subject: Re: samba package Date: Mon, 4 Feb 2002 06:48:05 -0500 X-Mailer: KMail [version 1.2] References: <000701c1ad6b$d56a6470$6601010a@pcsysadmin> In-Reply-To: <000701c1ad6b$d56a6470$6601010a@pcsysadmin> MIME-Version: 1.0 Message-Id: <02020406480501.00786@proxy.pt.com> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Monday 04 February 2002 06:05, Rostislav wrote: > I just installed my new 4.5R box using the official CDs. It looks very > strange but I can't find any samba package in any of 4 CDs? Does someone > have any idea why the package wasn't included to CDs? In contrast, the > samba package exist in ftp. Did you check all 4 CDs? -- Bill Moran Potential Technology technical services http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 4:28:57 2002 Delivered-To: freebsd-stable@freebsd.org Received: from dream.mplik.ru (dream.mplik.ru [195.58.1.132]) by hub.freebsd.org (Postfix) with ESMTP id ABE4937B417 for ; Mon, 4 Feb 2002 04:28:49 -0800 (PST) Received: from sight (sight.mplik.ru [195.58.27.104]) by dream.mplik.ru (8.9.3/8.9.1) with ESMTP id RAA94875; Mon, 4 Feb 2002 17:28:36 +0500 (YEKT) Date: Mon, 4 Feb 2002 17:28:33 +0500 From: Sergey Gershtein X-Mailer: The Bat! (v1.53bis) Business Reply-To: Sergey Gershtein Organization: Ural Relcom Ltd X-Priority: 3 (Normal) Message-ID: <114283707399.20020204172833@ur.ru> To: Peter Jeremy Cc: freebsd-stable@FreeBSD.ORG Subject: FS gurus needed! (was: Strange lock-ups during backup over nfs after adding 1024M RAM) In-Reply-To: <20020204130730.B72285@gsmx07.alcatel.com.au> References: <20020126204941.H17540-100000@resnet.uoregon.edu> <1931130530386.20020128130947@ur.ru> <20020130073449.B78919@gsmx07.alcatel.com.au> <791310002584.20020130150111@ur.ru> <20020131111153.Y72285@gsmx07.alcatel.com.au> <1427021336.20020201123650@ur.ru> <20020204130730.B72285@gsmx07.alcatel.com.au> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Monday, February 04, 2002 Peter Jeremy wrote: PJ> On 2002-Feb-01 12:36:50 +0500, Sergey Gershtein wrote: >>Here's what "vmstat -m" says about "FFS node": >> >>Memory statistics by type Type Kern >> Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) >> ... >> FFS node152293 76147K 76479K102400K 3126467 0 0 512 >> ... PJ> One oddity here is the Size - "FFS node" is used to allocate struct PJ> inode's and they should be 256 bytes on i386. Are you using something PJ> other than an i386 architecture? Unless this is a cut-and-paste PJ> error, I suspect something is radically wrong with your kernel. Yes, it's i386 and it's not cut-and-paste error. The current output of vmstat -m says: ... FFS node152725 76363K 76479K102400K 9247602 0 0 512 ... vfscache157865 10671K 11539K102400K 9668497 0 0 64,128,256,512,512K ... The system uptime is 5 days, backup is temporarily disabled. I put the coplete output of 'vmstat -m', some other commands and kernel config on the web on http://storm.mplik.ru/fbsd-stable/ so you can have a look at it. By the way, on our second server running the same hardware the size of "FFS node" is also 512. How can it be so? PJ> By default, the memory limit is 1/2 vm_kmem_size, which is 1/3 physical PJ> memory, capped to 200MB. Which means you've hit the default cap. PJ> You can increase this limit with the loader environment PJ> kern.vm.kmem.size (see loader(8) for details). (This is also capped PJ> at twice the physical memory - which won't affect you). Before you go PJ> overboard increasing this, note that the kernel virtual address space PJ> is only 1GB. Hmm. Not sure what to do. Shell I try to play with kern.vm.kmem.size or better not touch it? I am now thinking that removing the extra memory we've added is the best solution to the problem. I don't like this solution though. PJ> How many open files do you expect on your box? PJ> Is it reasonable for there to be >>150,000 active inodes? ptat -T right now says: 666/4096 files 0M/511M swap space I don't expect the number of open files go beyond 1,000-1,500. The only problem is accessing a lot (more than a 1,000,000) of small files over NFS. But if I understand correctly, those files should be opened and closed one by one, not all together. Is that right? PJ> Does "vfscache" have around the same number of InUse entries as "FFS node"? Yes, it seems so (see above). What does it mean? PJ> What is the output of "sysctl vfs"? See http://storm.mplik.ru/fbsd-stable/sysctl_vfs.txt PJ> PS: I'm still hoping that one of the FS gurus will step in and point PJ> out what's wrong. I changed the subject of my message to catch attention of FS gurus on the list. Thank you, Sergey To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 4:32:42 2002 Delivered-To: freebsd-stable@freebsd.org Received: from incoming.chartertn.net (smtp2.chartertn.net [24.158.96.18]) by hub.freebsd.org (Postfix) with SMTP id A21E237B41B for ; Mon, 4 Feb 2002 04:32:37 -0800 (PST) Received: (qmail 32632 invoked from network); 4 Feb 2002 12:36:14 -0000 Received: from kpt-c-24-159-35-85.chartertn.net (HELO zaphod) (24.159.35.85) by smtp2.chartertn.net with SMTP; 4 Feb 2002 12:36:14 -0000 From: "Eric Olsen" To: Bill Moran , freebsd-stable@FreeBSD.ORG Date: Mon, 4 Feb 2002 07:32:36 -0500 MIME-Version: 1.0 Subject: Re: samba package Reply-To: ericg@chartertn.net Message-ID: <3C5E3914.30599.19BD8BD5@localhost> References: <000701c1ad6b$d56a6470$6601010a@pcsysadmin> In-reply-to: <02020406480501.00786@proxy.pt.com> X-mailer: Pegasus Mail for Windows (v4.01) Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Content-description: Mail message body Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 4 Feb 2002 at 6:48, Bill Moran wrote: > On Monday 04 February 2002 06:05, Rostislav wrote: > > I just installed my new 4.5R box using the official CDs. It looks very > > strange but I can't find any samba package in any of 4 CDs? Does > > someone have any idea why the package wasn't included to CDs? In > > contrast, the samba package exist in ftp. > > Did you check all 4 CDs? Well, I don't know if he did, but I did -- it ain't there. Amazing. And the KDE package(s) looked a little light too (only -base and - libs??) Oh well, as for Samba it seems that 2.2.3 is on the way, so I guess I'll hang loose a while before upgrading. Downer for those intending to do a clean install from the CD's, though. All the best, Eric > > -- > Bill Moran > Potential Technology technical services > http://www.potentialtech.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > -- ************************************************* "Keep it as simple as possible -- but no simpler." -- A. Einstein To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 5: 2:20 2002 Delivered-To: freebsd-stable@freebsd.org Received: from balder.inter.net.il (balder.inter.net.il [192.114.186.15]) by hub.freebsd.org (Postfix) with ESMTP id 6856C37B41F for ; Mon, 4 Feb 2002 05:02:14 -0800 (PST) Received: from pcsysadmin ([192.114.169.162]) by balder.inter.net.il (Mirapoint) with SMTP id BER56741; Mon, 4 Feb 2002 15:01:37 +0200 (IST) Message-ID: <000701c1ad7c$b43cfbd0$6601010a@pcsysadmin> From: "Rostislav" To: "Bill Moran" , References: <000701c1ad6b$d56a6470$6601010a@pcsysadmin> <02020406480501.00786@proxy.pt.com> Subject: Re: samba package Date: Mon, 4 Feb 2002 15:06:02 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > On Monday 04 February 2002 06:05, Rostislav wrote: > > I just installed my new 4.5R box using the official CDs. It looks very > > strange but I can't find any samba package in any of 4 CDs? Does someone > > have any idea why the package wasn't included to CDs? In contrast, the > > samba package exist in ftp. > > Did you check all 4 CDs? Yes I did. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 5: 6:21 2002 Delivered-To: freebsd-stable@freebsd.org Received: from cage.simianscience.com (cage.simianscience.com [64.7.134.1]) by hub.freebsd.org (Postfix) with ESMTP id 95B9437B417; Mon, 4 Feb 2002 05:06:16 -0800 (PST) Received: (from root@localhost) by cage.simianscience.com (8.11.6/8.11.6) id g14D6F902056; Mon, 4 Feb 2002 08:06:15 -0500 (EST) (envelope-from mike@sentex.net) Received: from house.sentex.net (fcage [192.168.0.2]) by cage.simianscience.com (8.11.6/8.11.6av) with ESMTP id g14D6A902048; Mon, 4 Feb 2002 08:06:11 -0500 (EST) (envelope-from mike@sentex.net) Message-Id: <5.1.0.14.0.20020204080228.022ab9c0@192.168.0.12> X-Sender: mdtancsa@192.168.0.12 X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Mon, 04 Feb 2002 08:04:20 -0500 To: ru@freebsd.org From: Mike Tancsa Subject: Re: dropping 127.* on the floor Cc: stable@freebsd.org In-Reply-To: <20020203.191758.96919906.imp@village.org> References: <3C5DE578.4020409@gmx.net> <20020203152433.A5932-100000@voyager.straynet.com> <3C5DE578.4020409@gmx.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed X-Virus-Scanned: by AMaViS perl-10 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, Will this be backed out, or do you know of a work around to this issue? ---Mike At 07:17 PM 2/3/2002 -0700, M. Warner Losh wrote: >In message: <3C5DE578.4020409@gmx.net> > Michael Nottebrock writes: >: Greg Prosser wrote: >: >: > FWIW, my problem was a change in the ip stack. >: > >: > We now drop 127.* packets on the floor if they come in across an interface >: > that is not lo0. Since ipnat redirect rules happen below the ip stack, >: > packets which are rewritten by ipnat to use a 127.* address get dropped on >: > the floor when they enter the stack. ipnat records the redirect as having >: > worked, but the packet just disappears silently. This totally breaks >: > my transparent proxy, as I forward the connections to 127.0.0.1 via ipnat. >: >: >: Ugh. This probably means that transparent squid proxying will also break >: and _that_ scares me (no touchy cvsup for my -STABLE box). You might >: want to contact the committer about this. > >It is certainly looking like this change will be backed out. It is >well intended, but breaks too many things. :-( > >Warner > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-stable" in the body of the message -------------------------------------------------------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet since 1994 www.sentex.net Cambridge, Ontario Canada www.sentex.net/mike To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 5:14:51 2002 Delivered-To: freebsd-stable@freebsd.org Received: from tide.yandex.ru (tide.yandex.ru [213.180.193.107]) by hub.freebsd.org (Postfix) with ESMTP id 96C9F37B426 for ; Mon, 4 Feb 2002 05:14:36 -0800 (PST) Received: from YAMAIL (tide.yandex.ru) by mail.yandex.ru id ; Mon, 4 Feb 2002 16:14:24 +0300 To: freebsd-stable@FreeBSD.org Date: Mon, 4 Feb 2002 16:14:24 +0300 (MSK) From: "andreydv" Reply-To: andreydv@yandex.ru Message-Id: <3C5E8930.000057.21889@tide.yandex.ru> MIME-Version: 1.0 X-Mailer: Yamail [ http://yandex.ru ] X-source-ip: 212.119.189.106 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -- Best regards, Andrey To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 5:27:11 2002 Delivered-To: freebsd-stable@freebsd.org Received: from whale.sunbay.crimea.ua (whale.sunbay.crimea.ua [212.110.138.65]) by hub.freebsd.org (Postfix) with ESMTP id 40B5A37B41C; Mon, 4 Feb 2002 05:27:00 -0800 (PST) Received: (from ru@localhost) by whale.sunbay.crimea.ua (8.11.6/8.11.2) id g14DPJB69697; Mon, 4 Feb 2002 15:25:19 +0200 (EET) (envelope-from ru) Date: Mon, 4 Feb 2002 15:25:19 +0200 From: Ruslan Ermilov To: Mike Tancsa Cc: stable@freebsd.org, Warner Losh Subject: Re: dropping 127.* on the floor Message-ID: <20020204152519.B58535@sunbay.com> References: <3C5DE578.4020409@gmx.net> <20020203152433.A5932-100000@voyager.straynet.com> <3C5DE578.4020409@gmx.net> <5.1.0.14.0.20020204080228.022ab9c0@192.168.0.12> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <5.1.0.14.0.20020204080228.022ab9c0@192.168.0.12> User-Agent: Mutt/1.3.23i Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Feb 04, 2002 at 08:04:20AM -0500, Mike Tancsa wrote: > Hi, > Will this be backed out, or do you know of a work around to this > issue? > The ip_input() part in question was committed to RELENG_4 in revision 1.130.2.20 by a different committer, about a year ago. I think the original poster should fix his rulesets instead. I don't believe that transparent proxying (using the IPFIREWALL_FORWARD) was broken by this change, as it doesn't bind sockets to loopback addresses. > At 07:17 PM 2/3/2002 -0700, M. Warner Losh wrote: > >In message: <3C5DE578.4020409@gmx.net> > > Michael Nottebrock writes: > >: Greg Prosser wrote: > >: > >: > FWIW, my problem was a change in the ip stack. > >: > > >: > We now drop 127.* packets on the floor if they come in across an interface > >: > that is not lo0. Since ipnat redirect rules happen below the ip stack, > >: > packets which are rewritten by ipnat to use a 127.* address get dropped on > >: > the floor when they enter the stack. ipnat records the redirect as having > >: > worked, but the packet just disappears silently. This totally breaks > >: > my transparent proxy, as I forward the connections to 127.0.0.1 via ipnat. > >: > >: > >: Ugh. This probably means that transparent squid proxying will also break > >: and _that_ scares me (no touchy cvsup for my -STABLE box). You might > >: want to contact the committer about this. > > > >It is certainly looking like this change will be backed out. It is > >well intended, but breaks too many things. :-( > > > >Warner -- Ruslan Ermilov Sysadmin and DBA, ru@sunbay.com Sunbay Software AG, ru@FreeBSD.org FreeBSD committer, +380.652.512.251 Simferopol, Ukraine http://www.FreeBSD.org The Power To Serve http://www.oracle.com Enabling The Information Age To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 5:27:49 2002 Delivered-To: freebsd-stable@freebsd.org Received: from ns.sanda.gr.jp (ns.sanda.gr.jp [210.232.122.18]) by hub.freebsd.org (Postfix) with ESMTP id 6B71237B42A for ; Mon, 4 Feb 2002 05:27:39 -0800 (PST) Received: from ever.sanda.gr.jp (epoch [10.93.63.51]) by ns.sanda.gr.jp (8.11.6/3.7W) with ESMTP id g14DRba43910 for ; Mon, 4 Feb 2002 22:27:37 +0900 (JST) Received: from localhost (localhost [127.0.0.1]) by ever.sanda.gr.jp (8.8.8/3.3W9) with ESMTP id WAA02258 for ; Mon, 4 Feb 2002 22:27:37 +0900 (JST) To: freebsd-stable@freebsd.org Subject: Re: how to tell the kernel to use mfs in loader In-Reply-To: <200202040258.MAA02792@hadrian.staff.apnic.net> References: <200202040258.MAA02792@hadrian.staff.apnic.net> X-Mailer: Mew version 1.94 on Emacs 19.28 / Mule 2.3 =?iso-2022-jp?B?KBskQkt2RSYyVhsoQik=?= Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: <20020204222737C.non@ever.sanda.gr.jp> Date: Mon, 04 Feb 2002 22:27:37 +0900 From: non@ever.sanda.gr.jp X-Dispatcher: imput version 20000228(IM140) Lines: 11 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG From: ggm@apnic.net (George Michaelson) Date: Mon, 4 Feb 2002 12:56 EST > What can I do in loader phase to tell a kernel to use MFSROOT as the only > image? I suspect the install kernel is 'smart' - Sees a valid FS on the disk > and is using it for its init path. Not an exact answer but I usually boot kernel with MFS (e.g. installer) from boot0. I also would like to know how to tell to use MFS from /boot/loader console. // Noriaki Mitsunga // To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 6:12:33 2002 Delivered-To: freebsd-stable@freebsd.org Received: from gw.nectar.cc (gw.nectar.cc [208.42.49.153]) by hub.freebsd.org (Postfix) with ESMTP id 5FD3C37B42A; Mon, 4 Feb 2002 06:12:28 -0800 (PST) Received: from madman.nectar.cc (madman.nectar.cc [10.0.1.111]) by gw.nectar.cc (Postfix) with ESMTP id CE87D46; Mon, 4 Feb 2002 08:12:27 -0600 (CST) Received: (from nectar@localhost) by madman.nectar.cc (8.11.6/8.11.6) id g14ECRK23862; Mon, 4 Feb 2002 08:12:27 -0600 (CST) (envelope-from nectar) Date: Mon, 4 Feb 2002 08:12:27 -0600 From: "Jacques A. Vidrine" To: Ruslan Ermilov Cc: Mike Tancsa , stable@freebsd.org, Warner Losh Subject: Re: dropping 127.* on the floor Message-ID: <20020204141227.GB23733@madman.nectar.cc> References: <3C5DE578.4020409@gmx.net> <20020203152433.A5932-100000@voyager.straynet.com> <3C5DE578.4020409@gmx.net> <5.1.0.14.0.20020204080228.022ab9c0@192.168.0.12> <20020204152519.B58535@sunbay.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020204152519.B58535@sunbay.com> User-Agent: Mutt/1.3.27i X-Url: http://www.nectar.cc/ Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Feb 04, 2002 at 03:25:19PM +0200, Ruslan Ermilov wrote: > On Mon, Feb 04, 2002 at 08:04:20AM -0500, Mike Tancsa wrote: > > Hi, > > Will this be backed out, or do you know of a work around to this > > issue? > > > The ip_input() part in question was committed to RELENG_4 in revision > 1.130.2.20 by a different committer, about a year ago. See the Bugtraq archives for the thread starting with Message-ID: <3AA3ECAB.EA826D28@thebunker.net>, subject ``Loopback and multi-homed routing flaw in TCP/IP stack.'' for the reasons behind this change. The following URL might work. Cheers, -- Jacques A. Vidrine http://www.nectar.cc/ NTT/Verio SME . FreeBSD UNIX . Heimdal Kerberos jvidrine@verio.net . nectar@FreeBSD.org . nectar@kth.se To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 6:34:59 2002 Delivered-To: freebsd-stable@freebsd.org Received: from smtp1.sentex.ca (smtp1.sentex.ca [199.212.134.4]) by hub.freebsd.org (Postfix) with ESMTP id AB09037B427; Mon, 4 Feb 2002 06:34:47 -0800 (PST) Received: from simoeon.sentex.net (pyroxene.sentex.ca [199.212.134.18]) by smtp1.sentex.ca (8.11.6/8.11.6) with ESMTP id g14EYhV41002; Mon, 4 Feb 2002 09:34:43 -0500 (EST) (envelope-from mike@sentex.net) Message-Id: <5.1.0.14.0.20020204092437.050e66e0@marble.sentex.ca> X-Sender: mdtpop@marble.sentex.ca X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Mon, 04 Feb 2002 09:29:08 -0500 To: "Jacques A. Vidrine" , Ruslan Ermilov From: Mike Tancsa Subject: Re: dropping 127.* on the floor Cc: stable@FreeBSD.ORG, Warner Losh In-Reply-To: <20020204141227.GB23733@madman.nectar.cc> References: <20020204152519.B58535@sunbay.com> <3C5DE578.4020409@gmx.net> <20020203152433.A5932-100000@voyager.straynet.com> <3C5DE578.4020409@gmx.net> <5.1.0.14.0.20020204080228.022ab9c0@192.168.0.12> <20020204152519.B58535@sunbay.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 08:12 AM 2/4/02 -0600, Jacques A. Vidrine wrote: >See the Bugtraq archives for the thread starting with Message-ID: ><3AA3ECAB.EA826D28@thebunker.net>, subject ``Loopback and multi-homed >routing flaw in TCP/IP stack.'' for the reasons behind this change. >The following URL might work. > > What if this were dealt as part of firewall rules ? i.e. GENERIC was built by default with IPFIREWALL and firewall_enable="YES" and firewall_type="OPEN" were set. That way the behavior that people have come to rely on is still there for those that need it. I have not tested this yet with my production transparent proxies but I will try so later today to see if the behavior is broken as a number of people have reported. ---Mike To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 6:38: 4 2002 Delivered-To: freebsd-stable@freebsd.org Received: from gw.nectar.cc (gw.nectar.cc [208.42.49.153]) by hub.freebsd.org (Postfix) with ESMTP id E21DB37B420; Mon, 4 Feb 2002 06:37:59 -0800 (PST) Received: from madman.nectar.cc (madman.nectar.cc [10.0.1.111]) by gw.nectar.cc (Postfix) with ESMTP id 633BF10; Mon, 4 Feb 2002 08:37:59 -0600 (CST) Received: (from nectar@localhost) by madman.nectar.cc (8.11.6/8.11.6) id g14Ebxh29448; Mon, 4 Feb 2002 08:37:59 -0600 (CST) (envelope-from nectar) Date: Mon, 4 Feb 2002 08:37:58 -0600 From: "Jacques A. Vidrine" To: Mike Tancsa Cc: Ruslan Ermilov , stable@FreeBSD.ORG, Warner Losh Subject: Re: dropping 127.* on the floor Message-ID: <20020204143758.GA28243@madman.nectar.cc> References: <20020204152519.B58535@sunbay.com> <3C5DE578.4020409@gmx.net> <20020203152433.A5932-100000@voyager.straynet.com> <3C5DE578.4020409@gmx.net> <5.1.0.14.0.20020204080228.022ab9c0@192.168.0.12> <20020204152519.B58535@sunbay.com> <5.1.0.14.0.20020204092437.050e66e0@marble.sentex.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <5.1.0.14.0.20020204092437.050e66e0@marble.sentex.ca> User-Agent: Mutt/1.3.27i X-Url: http://www.nectar.cc/ Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Feb 04, 2002 at 09:29:08AM -0500, Mike Tancsa wrote: > At 08:12 AM 2/4/02 -0600, Jacques A. Vidrine wrote: > > >See the Bugtraq archives for the thread starting with Message-ID: > ><3AA3ECAB.EA826D28@thebunker.net>, subject ``Loopback and multi-homed > >routing flaw in TCP/IP stack.'' for the reasons behind this change. > >The following URL might work. > > > > > > What if this were dealt as part of firewall rules ? i.e. GENERIC was built > by default with IPFIREWALL and firewall_enable="YES" and > firewall_type="OPEN" were set. That way the behavior that people have come > to rely on is still there for those that need it. > > I have not tested this yet with my production transparent proxies but I > will try so later today to see if the behavior is broken as a number of > people have reported. We are talking about two different things: ip_input.c and ip_output.c. The recent change to ip_output.c is what might break your transparent proxy. Above I am talking about the year-old change to ip_input.c. Cheers, -- Jacques A. Vidrine http://www.nectar.cc/ NTT/Verio SME . FreeBSD UNIX . Heimdal Kerberos jvidrine@verio.net . nectar@FreeBSD.org . nectar@kth.se To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 7: 3:24 2002 Delivered-To: freebsd-stable@freebsd.org Received: from smtp0.adl1.internode.on.net (smtp0.adl1.internode.on.net [203.16.214.194]) by hub.freebsd.org (Postfix) with ESMTP id 8012337B425; Mon, 4 Feb 2002 07:03:18 -0800 (PST) Received: from vee.net (wintermute.home.vee.net [203.18.245.2]) by smtp0.adl1.internode.on.net (8.11.6/8.11.6) with ESMTP id g14F2ea28754; Tue, 5 Feb 2002 01:32:40 +1030 (CST) (envelope-from mike@vee.net) Message-ID: <3C5EA225.8070402@vee.net> Date: Tue, 05 Feb 2002 01:30:53 +1030 From: Mike Gratton User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:0.9.8+) Gecko/20020127 X-Accept-Language: en-au, en-gb MIME-Version: 1.0 To: andrew.cowan@hsd.com.au Cc: Mike Meyer , Terry Lambert , Juha Saarinen , "Brian T.Schellenberger" , Wilko Bulte , Paul Fardy , current@FreeBSD.ORG, stable@FreeBSD.ORG Subject: Re: Junior Annoying Hacker Task References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Andrew Cowan wrote: > > However, I have previously thought that a system that used xml files to > store application configs (that would then be used to generate valid conf > files) would be useful. I was on the verge of doing so the other day. Basically, I wanted to have standard configuration data describing the network, services and service configuration stored in XML and use XSLT to produce which-ever config files you need. You then introduce some inheritance and allow configuration to be overridden for particular hosts, subnets, networks, and/or platforms, and you have a powerful site-wide configuration management tool. You get all the usual benefits from using XML as well; data source, processing and output independence, so the configuration data could be use to automatically generate HTML for helpdesk pages, could be sourced from existing a variety of new or pre-existing data repositories (LDAP, CVS, file system, etc.) and could be processed and edited using a number of standard tools. If only I had not run out of time write it, I'd be happily using this today. Mike. -- Mike Gratton "Every motive escalate." Blatant self-promotion: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 7: 7:16 2002 Delivered-To: freebsd-stable@freebsd.org Received: from duke.cs.duke.edu (duke.cs.duke.edu [152.3.140.1]) by hub.freebsd.org (Postfix) with ESMTP id 8D48D37B405 for ; Mon, 4 Feb 2002 07:07:11 -0800 (PST) Received: from grasshopper.cs.duke.edu (grasshopper.cs.duke.edu [152.3.145.30]) by duke.cs.duke.edu (8.9.3/8.9.3) with ESMTP id KAA23041; Mon, 4 Feb 2002 10:07:10 -0500 (EST) Received: (from gallatin@localhost) by grasshopper.cs.duke.edu (8.11.6/8.9.1) id g14F6eo04418; Mon, 4 Feb 2002 10:06:40 -0500 (EST) (envelope-from gallatin@cs.duke.edu) From: Andrew Gallatin MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15454.41856.576648.713774@grasshopper.cs.duke.edu> Date: Mon, 4 Feb 2002 10:06:40 -0500 (EST) To: ggm@apnic.net (George Michaelson) Cc: freebsd-stable@freebsd.org Reply-To: freebsd-stable@freebsd.org Subject: Re: how to tell the kernel to use mfs in loader In-Reply-To: <200202040258.MAA02792@hadrian.staff.apnic.net> References: <200202040258.MAA02792@hadrian.staff.apnic.net> X-Mailer: VM 6.75 under 21.1 (patch 12) "Channel Islands" XEmacs Lucid Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG George Michaelson writes: > > I am trying to install FreeBSD 4.5 on a laptop with no floppy or CD. > > I have copied the install kernel/mfsroot image off a floppy via vnconfig > but even with the minimalist loader.rc I am finding the install kernel > mounts my hard disk root, not the MFS root Its been given in memory. > > What can I do in loader phase to tell a kernel to use MFSROOT as the only > image? I suspect the install kernel is 'smart' - Sees a valid FS on the disk > and is using it for its init path. In the loader, set vfs.root.mountfrom=ufs:/dev/md0c (or whatever the memory disk that the install uses is called). Drew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 7: 8:47 2002 Delivered-To: freebsd-stable@freebsd.org Received: from voyager.straynet.com (voyager.straynet.com [208.185.24.8]) by hub.freebsd.org (Postfix) with ESMTP id 95C4337B421; Mon, 4 Feb 2002 07:08:42 -0800 (PST) Received: by voyager.straynet.com (Postfix, from userid 1001) id 336BD20699; Mon, 4 Feb 2002 10:07:22 -0500 (EST) Received: from localhost (localhost [127.0.0.1]) by voyager.straynet.com (Postfix) with ESMTP id 2447C18C97; Mon, 4 Feb 2002 10:07:22 -0500 (EST) Date: Mon, 4 Feb 2002 10:07:22 -0500 (EST) From: Greg Prosser X-X-Sender: Reply-To: Greg Prosser To: "Jacques A. Vidrine" Cc: Mike Tancsa , Ruslan Ermilov , , Warner Losh Subject: Re: dropping 127.* on the floor In-Reply-To: <20020204143758.GA28243@madman.nectar.cc> Message-ID: <20020204100307.F12914-100000@voyager.straynet.com> X-Sysadmin-Nolife: True X-BOFH: Yes MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG on Mon, 4 Feb 2002, Jacques A. Vidrine babbled .. ;; On Mon, Feb 04, 2002 at 09:29:08AM -0500, Mike Tancsa wrote: ;; > At 08:12 AM 2/4/02 -0600, Jacques A. Vidrine wrote: ;; > ;; > >See the Bugtraq archives for the thread starting with Message-ID: ;; > ><3AA3ECAB.EA826D28@thebunker.net>, subject ``Loopback and multi-homed ;; > >routing flaw in TCP/IP stack.'' for the reasons behind this change. ;; > >The following URL might work. ;; > > ;; > > ;; > ;; > What if this were dealt as part of firewall rules ? i.e. GENERIC was built ;; > by default with IPFIREWALL and firewall_enable="YES" and ;; > firewall_type="OPEN" were set. That way the behavior that people have come ;; > to rely on is still there for those that need it. ;; > ;; > I have not tested this yet with my production transparent proxies but I ;; > will try so later today to see if the behavior is broken as a number of ;; > people have reported. ;; ;; We are talking about two different things: ip_input.c and ip_output.c. ;; The recent change to ip_output.c is what might break your transparent ;; proxy. Above I am talking about the year-old change to ip_input.c. According to the squid FAQ[1], they recommend using ipfw fwd rules diverting traffic to 127.0.0.1 to transparently insert the cache server. This behaviour is now broken, as ipfw rewrites the packet before it hits the network stack, as does ipf, and both end up dropped. I've tested and confirmed this on 4.5-STABLE, the rules in the FAQ did not work for me. -gnp [1] squid FAQ URL: http://www.squid-cache.org/Doc/FAQ/FAQ-17.html#ss17.8 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 7:38:37 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mail.27in.tv (roc-66-24-112-7.rochester.rr.com [66.24.112.7]) by hub.freebsd.org (Postfix) with ESMTP id 8445037B41E for ; Mon, 4 Feb 2002 07:38:27 -0800 (PST) Received: (from root@localhost) by mail.27in.tv (8.11.6/8.11.6) id g14FcP968296 for stable@freebsd.org; Mon, 4 Feb 2002 10:38:25 -0500 (EST) (envelope-from cjm2@earthling.net) Received: from 27in.tv (roc-66-24-112-7.rochester.rr.com [66.24.112.7]) by mail.27in.tv (8.11.6/8.11.6av) with SMTP id g14FcOh68287 for ; Mon, 4 Feb 2002 10:38:24 -0500 (EST) (envelope-from cjm2@earthling.net) Received: from 216.153.201.138 (SquirrelMail authenticated user cjm2) by www1.27in.tv with HTTP; Mon, 4 Feb 2002 10:38:24 -0500 (EST) Message-ID: <1518.216.153.201.138.1012837104.squirrel@www1.27in.tv> Date: Mon, 4 Feb 2002 10:38:24 -0500 (EST) Subject: Re: dropping 127.* on the floor From: "C J Michaels" To: In-Reply-To: <20020204141227.GB23733@madman.nectar.cc> References: <20020204141227.GB23733@madman.nectar.cc> X-Priority: 3 Importance: Normal X-MSMail-Priority: Normal X-Mailer: SquirrelMail (version 1.2.5 [cvs]) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Virus-Scanned: by AMaViS perl-11 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Jacques A. Vidrine said: > On Mon, Feb 04, 2002 at 03:25:19PM +0200, Ruslan Ermilov wrote: >> On Mon, Feb 04, 2002 at 08:04:20AM -0500, Mike Tancsa wrote: >> > Hi, >> > Will this be backed out, or do you know of a work around to >> > this >> > issue? >> > >> The ip_input() part in question was committed to RELENG_4 in revision >> 1.130.2.20 by a different committer, about a year ago. > > See the Bugtraq archives for the thread starting with Message-ID: > <3AA3ECAB.EA826D28@thebunker.net>, subject ``Loopback and multi-homed > routing flaw in TCP/IP stack.'' for the reasons behind this change. The > following URL might work. (sorry just picked up on this thread.) I'm curious when this change was committed, as I'm running -STABLE as of Jan 29, with squid acting as a transparent proxy w/o any problems. --Chris > > > > Cheers, > -- > Jacques A. Vidrine http://www.nectar.cc/ > NTT/Verio SME . FreeBSD UNIX . Heimdal Kerberos > jvidrine@verio.net . nectar@FreeBSD.org . nectar@kth.se > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 7:45:34 2002 Delivered-To: freebsd-stable@freebsd.org Received: from TheWorld.com (pcls1.std.com [199.172.62.103]) by hub.freebsd.org (Postfix) with ESMTP id A04D237B42A for ; Mon, 4 Feb 2002 07:45:29 -0800 (PST) Received: from shell.TheWorld.com (root@shell01.TheWorld.com [199.172.62.241]) by TheWorld.com (8.9.3/8.9.3) with ESMTP id KAA15600; Mon, 4 Feb 2002 10:45:22 -0500 Received: (from kwc@localhost) by shell.TheWorld.com (8.9.3/8.9.3) id KAA10976104; Mon, 4 Feb 2002 10:45:21 -0500 (EST) Date: Mon, 4 Feb 2002 10:45:21 -0500 (EST) From: Kenneth W Cochran Message-Id: <200202041545.KAA10976104@shell.TheWorld.com> To: Mike Gratton Subject: Re: Junior Annoying Hacker Task Cc: freebsd-stable@freebsd.org References: Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Please, please, folks, get this thread out of -stable; the past few days' -stable traffic has been > 25% this thread and it has *nothing* to do with -stable. Many thanks, -kc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 8: 4: 6 2002 Delivered-To: freebsd-stable@freebsd.org Received: from modemcable044.152-202-24.mtl.mc.videotron.ca (modemcable044.152-202-24.mtl.mc.videotron.ca [24.202.152.44]) by hub.freebsd.org (Postfix) with ESMTP id 36B6E37B41B; Mon, 4 Feb 2002 08:04:00 -0800 (PST) Received: from anphor (anphor.grandpre.mindstep.com [192.168.0.8]) by jacuzzi.grandpre.mindstep.com (Postfix) with SMTP id A3B1D14D3F; Mon, 4 Feb 2002 11:03:21 -0500 (EST) From: "Patrick Bihan-Faou" To: , Subject: RE: Junior Annoying Hacker Task Date: Mon, 4 Feb 2002 17:03:52 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 In-Reply-To: <15452.50112.625066.914576@guru.mired.org> Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I don't know whether the suggested approach is really a good one or not, but as far as implementing some registry-like features in FreeBSD, we have developped something that proves to be useful. The idea was to extend the sysctl mechanism to make it dynamic from the user-land point of view. This was implemented as a kernel module (a simple one too) and a modified sysctl command line. With this mod we can add/remove nodes in the sysctl tree and use it to store information that is needed by many applications. The implementation we have is certainly rough, but it gets the job done and represents a very easy and convenient tool for: - sharing non sensitive bits of information between processes - storing configuration/status data in an easy to use manner - benefit from the tree like presentation of sysctl (building a gui around this should be easy) - don't loose the 'vi' compatibility (sysctl values can be loaded at boot time from a text file) Note that the security model around these 'user-land dynamic sysctl entries' can be improved significantly, but as a proof of concept the mod is useful. Some may argue that storing userland data in the kernel space is Not A Nice Thing(tm) but it certainly makes things a lot easier. Patrick. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 8:14:33 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mail.gmx.net (mail.gmx.net [213.165.64.20]) by hub.freebsd.org (Postfix) with SMTP id EF17E37B42C for ; Mon, 4 Feb 2002 08:14:29 -0800 (PST) Received: (qmail 11746 invoked by uid 0); 4 Feb 2002 16:14:28 -0000 Received: from pd900328f.dip.t-dialin.net (HELO gmx.net) (217.0.50.143) by mail.gmx.net (mp005-rz3) with SMTP; 4 Feb 2002 16:14:28 -0000 Message-ID: <3C5EB372.4070705@gmx.net> Date: Mon, 04 Feb 2002 17:14:42 +0100 From: Michael Nottebrock User-Agent: Mozilla/5.0 (X11; U; Linux i386; en-US; rv:0.9.7) Gecko/20011221 X-Accept-Language: en-us MIME-Version: 1.0 To: C J Michaels Cc: stable@FreeBSD.ORG Subject: Re: dropping 127.* on the floor References: <20020204141227.GB23733@madman.nectar.cc> <1518.216.153.201.138.1012837104.squirrel@www1.27in.tv> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG C J Michaels wrote: > (sorry just picked up on this thread.) > I'm curious when this change was committed, as I'm running -STABLE as of > Jan 29, with squid acting as a transparent proxy w/o any problems. Feb 1. http://docs.freebsd.org/cgi/getmsg.cgi?fetch=1518015+0+archive/2002/cvs-all/20020203.cvs-all -- Michael Nottebrock To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 8:23:29 2002 Delivered-To: freebsd-stable@freebsd.org Received: from relay.gnf.org (relay.gnf.org [208.44.31.36]) by hub.freebsd.org (Postfix) with ESMTP id EC6A537B420 for ; Mon, 4 Feb 2002 08:23:25 -0800 (PST) Received: from mail.gnf.org (smtp.gnf.org [10.0.0.11]) by relay.gnf.org (8.11.6/8.11.6) with ESMTP id g14GNLw07542; Mon, 4 Feb 2002 08:23:22 -0800 Received: by mail.gnf.org (Postfix, from userid 888) id E98D311E511; Mon, 4 Feb 2002 08:20:50 -0800 (PST) Received: from localhost (localhost [127.0.0.1]) by mail.gnf.org (Postfix) with ESMTP id E593E11A577; Mon, 4 Feb 2002 08:20:50 -0800 (PST) Date: Mon, 4 Feb 2002 08:20:50 -0800 (PST) From: Gordon Tetlow To: George Michaelson Cc: Subject: Re: how to tell the kernel to use mfs in loader In-Reply-To: <200202040258.MAA02792@hadrian.staff.apnic.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 4 Feb 2002, George Michaelson wrote: > > I am trying to install FreeBSD 4.5 on a laptop with no floppy or CD. > > I have copied the install kernel/mfsroot image off a floppy via vnconfig > but even with the minimalist loader.rc I am finding the install kernel > mounts my hard disk root, not the MFS root Its been given in memory. > > What can I do in loader phase to tell a kernel to use MFSROOT as the only > image? I suspect the install kernel is 'smart' - Sees a valid FS on the disk > and is using it for its init path. Check the kern.flp's loader.rc which has something like (working from memory): load -t mfs_root /mfsroot -gordon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 9: 2: 0 2002 Delivered-To: freebsd-stable@freebsd.org Received: from rwcrmhc51.attbi.com (rwcrmhc51.attbi.com [204.127.198.38]) by hub.freebsd.org (Postfix) with ESMTP id 2C2DB37B42B for ; Mon, 4 Feb 2002 09:01:47 -0800 (PST) Received: from bmah.dyndns.org ([12.233.149.189]) by rwcrmhc51.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020204170146.PAJN26243.rwcrmhc51.attbi.com@bmah.dyndns.org>; Mon, 4 Feb 2002 17:01:46 +0000 Received: (from bmah@localhost) by bmah.dyndns.org (8.11.6/8.11.6) id g14H1k834204; Mon, 4 Feb 2002 09:01:46 -0800 (PST) (envelope-from bmah) Message-Id: <200202041701.g14H1k834204@bmah.dyndns.org> X-Mailer: exmh version 2.5 07/13/2001 with nmh-1.0.4 To: Archie Cobbs Cc: Scott Long , "M. Warner Losh" , freebsd-stable@FreeBSD.ORG Subject: Re: New item for -stable UPDATING... In-reply-to: <200202031905.g13J5Dw02615@arch20m.dellroad.org> References: <200202031905.g13J5Dw02615@arch20m.dellroad.org> Comments: In-reply-to Archie Cobbs message dated "Sun, 03 Feb 2002 11:05:13 -0800." From: "Bruce A. Mah" Reply-To: bmah@FreeBSD.ORG X-Face: g~c`.{#4q0"(V*b#g[i~rXgm*w;:nMfz%_RZLma)UgGN&=j`5vXoU^@n5v4:OO)c["!w)nD/!!~e4Sj7LiT'6*wZ83454H""lb{CC%T37O!!'S$S&D}sem7I[A 2V%N&+ X-Image-Url: http://www.employees.org/~bmah/Images/bmah-cisco-small.gif X-Url: http://www.employees.org/~bmah/ Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 04 Feb 2002 09:01:46 -0800 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG If memory serves me right, Archie Cobbs wrote: > Scott Long writes: > > > Starting with revision 1.17.2.3 (5-Nov-2001) of > > > sys/compat/linux/linux_ipc.c, your kernel must include > > > 'options SYSVSEM' in order to load the linux emulation KLD. > > > > If this dependency is indeed permanent, it should also be documented in > > LINT, linux(4), and the release notes. > > Agreed.. and whoever the linux person is should do it, not me :-) 5.0-CURRENT release notes updated...check. 4.5-RELEASE errata updated...check. Is it just me, or is there no linux(4) manpage for 4-STABLE? Bruce. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 9:37:39 2002 Delivered-To: freebsd-stable@freebsd.org Received: from guru.mired.org (dsl-64-192-6-133.telocity.com [64.192.6.133]) by hub.freebsd.org (Postfix) with SMTP id 2A4F337B404 for ; Mon, 4 Feb 2002 09:37:32 -0800 (PST) Received: (qmail 4278 invoked by uid 100); 4 Feb 2002 17:37:26 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15454.50902.536208.470087@guru.mired.org> Date: Mon, 4 Feb 2002 11:37:26 -0600 To: Kent Stewart Cc: stable@FreeBSD.ORG Subject: Re: Problems with SiS900 on S7K5A In-Reply-To: <3C5E0E61.1020505@owt.com> References: <15453.48613.12001.228683@guru.mired.org> <3C5DFC55.3040200@owt.com> <15454.2953.418521.487837@guru.mired.org> <3C5E0E61.1020505@owt.com> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ From: "Mike Meyer" X-Delivery-Agent: TMDA/0.44 (Python 2.2; freebsd-4.5-STABLE-i386) Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Kent Stewart types: > I am not seeing the lack of connect to the modem. Since all of the > systems are cross connected, I probably can't tell. My download > finally died at 202 MB because I filled /. I'm not doing downloads, just my normal network stuff. I noticed that if I leave X off - meaning I don't have a gkrellm running on the server displaying back to my workstation - it doesn't seem to happen. I think I'll leave that gkrellm off, and see what happens. Thanx, http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 9:52:29 2002 Delivered-To: freebsd-stable@freebsd.org Received: from web4.thecenturiongroup.com (112.mujb.nyrk.nycenycp.dsl.att.net [12.98.137.112]) by hub.freebsd.org (Postfix) with ESMTP id 0A15C37B41B for ; Mon, 4 Feb 2002 09:52:15 -0800 (PST) Received: from ix1x1000 (ix1x1000.thecenturiongroup.com [192.32.248.52]) by web4.thecenturiongroup.com (Postfix) with SMTP id A5F0C7C004 for ; Mon, 4 Feb 2002 12:20:36 -0500 (EST) Message-ID: <004b01c1ad9f$a3246040$34f820c0@ix1x1000> From: "Michael Meltzer" To: Subject: intel SCB2/ATA100 that has a Promise PDC20267 Date: Mon, 4 Feb 2002 12:16:09 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0048_01C1AD75.BA400060" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0048_01C1AD75.BA400060 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable About ready to order 2 servers that are using an Intel motherboard that = has a build in ata 100 RAID controler, checking the specs it listed as a = Promise PDC20267 that has listed drivers for everything but Freebsd.=20 http://www.promise.com/product/oem_ataraid_pdc20267_eng.asp Anyone know if we have a driver for this, I notice that dell had a = problem with drivrers for the Promise and wondered if this could be the = same. I checked around but could not fiuge this out on my own.(what the = underlying chip is) Thanks. MJM ------=_NextPart_000_0048_01C1AD75.BA400060 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
About ready to order 2 servers that are = using an=20 Intel motherboard that has a build in ata 100 RAID controler, checking = the specs=20 it listed as a Promise PDC20267 that has listed drivers = for=20 everything but Freebsd.
http= ://www.promise.com/product/oem_ataraid_pdc20267_eng.asp
 
Anyone know if we have a driver for = this, I notice=20 that dell had a problem with drivrers for the Promise and wondered if = this could=20 be the same. I checked around but could not fiuge this out on my = own.(what the=20 underlying chip is)
 
Thanks.
 
MJM
------=_NextPart_000_0048_01C1AD75.BA400060-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 10: 9:54 2002 Delivered-To: freebsd-stable@freebsd.org Received: from freebie.xs4all.nl (freebie.xs4all.nl [213.84.32.253]) by hub.freebsd.org (Postfix) with ESMTP id 9A0E137B41E; Mon, 4 Feb 2002 10:09:48 -0800 (PST) Received: (from wkb@localhost) by freebie.xs4all.nl (8.11.6/8.11.6) id g14I9kN03463; Mon, 4 Feb 2002 19:09:46 +0100 (CET) (envelope-from wkb) Date: Mon, 4 Feb 2002 19:09:46 +0100 From: Wilko Bulte To: "Bruce A. Mah" Cc: Archie Cobbs , Scott Long , "M. Warner Losh" , freebsd-stable@FreeBSD.ORG Subject: Re: New item for -stable UPDATING... Message-ID: <20020204190946.A3440@freebie.xs4all.nl> References: <200202031905.g13J5Dw02615@arch20m.dellroad.org> <200202041701.g14H1k834204@bmah.dyndns.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200202041701.g14H1k834204@bmah.dyndns.org>; from bmah@FreeBSD.ORG on Mon, Feb 04, 2002 at 09:01:46AM -0800 X-OS: FreeBSD 4.5-STABLE X-PGP: finger wilko@freebsd.org Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Feb 04, 2002 at 09:01:46AM -0800, Bruce A. Mah wrote: > If memory serves me right, Archie Cobbs wrote: > > Scott Long writes: > > > > Starting with revision 1.17.2.3 (5-Nov-2001) of > > > > sys/compat/linux/linux_ipc.c, your kernel must include > > > > 'options SYSVSEM' in order to load the linux emulation KLD. > > > > > > If this dependency is indeed permanent, it should also be documented in > > > LINT, linux(4), and the release notes. > > > > Agreed.. and whoever the linux person is should do it, not me :-) > > 5.0-CURRENT release notes updated...check. > > 4.5-RELEASE errata updated...check. > > Is it just me, or is there no linux(4) manpage for 4-STABLE? Not you.. wb ~: man 4 linux No entry for linux in section 4 of the manual wb ~: uname -a FreeBSD freebie.xs4all.nl 4.5-STABLE FreeBSD 4.5-STABLE #0: Sun Feb 3 19:22:38 CET 2002 root@freebie.xs4all.nl:/usr/src/sys/compile/FREEBIE i386 wb ~: -- | / o / /_ _ wilko@FreeBSD.org |/|/ / / /( (_) Bulte Arnhem, the Netherlands To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 10:19:56 2002 Delivered-To: freebsd-stable@freebsd.org Received: from luxren2.boostworks.com (luxren2.boostworks.com [194.167.81.214]) by hub.freebsd.org (Postfix) with ESMTP id 8378C37B432 for ; Mon, 4 Feb 2002 10:19:24 -0800 (PST) Received: from boostworks.com (rn.lxlun.boostworks.com [192.168.8.100]) by luxren2.boostworks.com (8.11.3/8.11.3) with ESMTP id g14IJ5604842; Mon, 4 Feb 2002 19:19:10 +0100 (CET) Message-Id: <200202041819.g14IJ5604842@luxren2.boostworks.com> Date: Mon, 4 Feb 2002 19:18:38 +0100 (CET) From: remy@boostworks.com Subject: Re: intel SCB2/ATA100 that has a Promise PDC20267 To: mjm@michaelmeltzer.com Cc: stable@FreeBSD.ORG In-Reply-To: <004b01c1ad9f$a3246040$34f820c0@ix1x1000> MIME-Version: 1.0 Content-Type: TEXT/plain; charset=us-ascii Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 4 Feb, Michael Meltzer wrote: > About ready to order 2 servers that are using an Intel motherboard > that has a build in ata 100 RAID controler, checking the specs it > listed as a Promise PDC20267 that has listed drivers for everything > but Freebsd. > http://www.promise.com/product/oem_ataraid_pdc20267_eng.asp > > Anyone know if we have a driver for this, I notice that dell had a > problem with drivrers for the Promise and wondered if this could be > the same. I checked around but could not fiuge this out on my > own.(what the underlying chip is) > > Thanks. > > MJM The current SCB2 bios (as shipped) have solved a problem when using one disk. Got 2 since nearly 2 month and running 4.4-STABLE (and 4.5, now) without any problem. Beware of funny things that happens with the "front" serial RJ45 plug. Your console acces may compete with the internal ARM processor that do IPMI. Aside this, a very fast machine running pretty cool with 512K Tualatins. Board built for Intel's cases SRxxxx. RN. IhM To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 10:27: 5 2002 Delivered-To: freebsd-stable@freebsd.org Received: from magic.adaptec.com (magic.adaptec.com [208.236.45.80]) by hub.freebsd.org (Postfix) with ESMTP id 7B7CD37B4A9; Mon, 4 Feb 2002 10:25:44 -0800 (PST) Received: from redfish.adaptec.com (redfish.adaptec.com [162.62.50.11]) by magic.adaptec.com (8.8.8+Sun/8.8.8) with ESMTP id KAA02398; Mon, 4 Feb 2002 10:18:36 -0800 (PST) Received: from btc.btc.adaptec.com (btc.btc.adaptec.com [162.62.64.10]) by redfish.adaptec.com (8.8.8+Sun/8.8.8) with ESMTP id KAA27049; Mon, 4 Feb 2002 10:01:43 -0800 (PST) Received: from btcexc01.btc.adaptec.com (btcexc01 [162.62.147.10]) by btc.btc.adaptec.com (8.8.8+Sun/8.8.8) with ESMTP id LAA11787; Mon, 4 Feb 2002 11:18:33 -0700 (MST) Received: by btcexc01.btc.adaptec.com with Internet Mail Service (5.5.2653.19) id ; Mon, 4 Feb 2002 11:18:34 -0700 Message-ID: From: "Long, Scott" To: "'Wilko Bulte'" , "Bruce A. Mah" Cc: Archie Cobbs , "Long, Scott" , "M. Warner Losh" , freebsd-stable@freebsd.org Subject: RE: New item for -stable UPDATING... Date: Mon, 4 Feb 2002 11:18:26 -0700 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > On Mon, Feb 04, 2002 at 09:01:46AM -0800, Bruce A. Mah wrote: > > If memory serves me right, Archie Cobbs wrote: > > > Scott Long writes: > > > > > Starting with revision 1.17.2.3 (5-Nov-2001) of > > > > > sys/compat/linux/linux_ipc.c, your kernel must include > > > > > 'options SYSVSEM' in order to load the linux > emulation KLD. > > > > > > > > If this dependency is indeed permanent, it should also > be documented in > > > > LINT, linux(4), and the release notes. > > > > > > Agreed.. and whoever the linux person is should do it, not me :-) > > > > 5.0-CURRENT release notes updated...check. > > > > 4.5-RELEASE errata updated...check. > > > > Is it just me, or is there no linux(4) manpage for 4-STABLE? > > Not you.. > > wb ~: man 4 linux > No entry for linux in section 4 of the manual > wb ~: uname -a > FreeBSD freebie.xs4all.nl 4.5-STABLE FreeBSD 4.5-STABLE #0: Sun Feb 3 > 19:22:38 CET 2002 > root@freebie.xs4all.nl:/usr/src/sys/compile/FREEBIE > i386 > wb ~: > Heh... well, there is one in -current 8-) I had another thought rolling around my head. Since sysinstall gives the user the option of turning linux.ko on, we might also want to put SYSVSEM into the GENERIC kernel. Or it might be easier to find out who started this mess and string him up by his toenails 8-) Scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 10:47:11 2002 Delivered-To: freebsd-stable@freebsd.org Received: from rwcrmhc51.attbi.com (rwcrmhc51.attbi.com [204.127.198.38]) by hub.freebsd.org (Postfix) with ESMTP id 14E2937B427; Mon, 4 Feb 2002 10:46:59 -0800 (PST) Received: from bmah.dyndns.org ([12.233.149.189]) by rwcrmhc51.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020204184658.ROAT26243.rwcrmhc51.attbi.com@bmah.dyndns.org>; Mon, 4 Feb 2002 18:46:58 +0000 Received: (from bmah@localhost) by bmah.dyndns.org (8.11.6/8.11.6) id g14Ikv035260; Mon, 4 Feb 2002 10:46:57 -0800 (PST) (envelope-from bmah) Message-Id: <200202041846.g14Ikv035260@bmah.dyndns.org> X-Mailer: exmh version 2.5 07/13/2001 with nmh-1.0.4 To: "Long, Scott" Cc: "'Wilko Bulte'" , "Bruce A. Mah" , Archie Cobbs , "M. Warner Losh" , freebsd-stable@freebsd.org Subject: Re: New item for -stable UPDATING... In-reply-to: References: Comments: In-reply-to "Long, Scott" message dated "Mon, 04 Feb 2002 11:18:26 -0700." From: bmah@freebsd.org (Bruce A. Mah) Reply-To: bmah@freebsd.org X-Face: g~c`.{#4q0"(V*b#g[i~rXgm*w;:nMfz%_RZLma)UgGN&=j`5vXoU^@n5v4:OO)c["!w)nD/!!~e4Sj7LiT'6*wZ83454H""lb{CC%T37O!!'S$S&D}sem7I[A 2V%N&+ X-Image-Url: http://www.employees.org/~bmah/Images/bmah-cisco-small.gif X-Url: http://www.employees.org/~bmah/ Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 04 Feb 2002 10:46:57 -0800 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG If memory serves me right, "Long, Scott" wrote: > > On Mon, Feb 04, 2002 at 09:01:46AM -0800, Bruce A. Mah wrote: > > > Is it just me, or is there no linux(4) manpage for 4-STABLE? > Heh... well, there is one in -current 8-) So there is. I wonder if there's any reason why it hasn't been MFC-ed yet? (Other than the fact that linux(8) still exists, which seems to have been part of the reason for linux.4's existence.) > I had another thought rolling around my head. Since sysinstall gives the > user the option of turning linux.ko on, we might also want to put SYSVSEM > into the GENERIC kernel. It's there. In fact, this was one of the reasons that 4.5-RELEASE went out late (the kernel was too big). Bruce. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 12: 5: 2 2002 Delivered-To: freebsd-stable@freebsd.org Received: from resnet.uoregon.edu (resnet.uoregon.edu [128.223.122.47]) by hub.freebsd.org (Postfix) with ESMTP id 1087337B421 for ; Mon, 4 Feb 2002 12:04:58 -0800 (PST) Received: from localhost (dwhite@localhost) by resnet.uoregon.edu (8.11.3/8.10.1) with ESMTP id g14K5NL63291; Mon, 4 Feb 2002 12:05:24 -0800 (PST) Date: Mon, 4 Feb 2002 12:05:23 -0800 (PST) From: Doug White To: Rahul Siddharthan Cc: stable@FreeBSD.ORG Subject: Re: Can't build unoptimized/debugging kernel In-Reply-To: <20020201223251.A6836@lpt.ens.fr> Message-ID: <20020204120459.J61624-100000@resnet.uoregon.edu> X-All-Your-Base: are belong to us MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 1 Feb 2002, Rahul Siddharthan wrote: > > See the Handbook section on debugging crash dumps for more information. > > Hm, that section seems to have disappeared from the present handbook. > The version on my hard disk (a bit old) says configure the kernel with > "config -g". I was using the make buildkernel/make installkernel > procedure so I thought the make.conf file would be the right way... Oops, it's moved to the Developer's Handbook, chapter 16, Kernel Debugging. Doug White | FreeBSD: The Power to Serve dwhite@resnet.uoregon.edu | www.FreeBSD.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 12:24:34 2002 Delivered-To: freebsd-stable@freebsd.org Received: from alicia.nttmcl.com (alicia.nttmcl.com [216.69.69.10]) by hub.freebsd.org (Postfix) with ESMTP id 3129E37B41C for ; Mon, 4 Feb 2002 12:24:31 -0800 (PST) Received: (from jj@localhost) by alicia.nttmcl.com (8.10.1/8.10.1) id g14KOPO00357; Mon, 4 Feb 2002 12:24:25 -0800 (PST) Date: Mon, 4 Feb 2002 12:24:25 -0800 From: JJ Behrens To: Rostislav Cc: freebsd-stable@freebsd.org Subject: KDE mixup: was samba package Message-ID: <20020204122425.A27402@alicia.nttmcl.com> References: <000701c1ad6b$d56a6470$6601010a@pcsysadmin> <02020406480501.00786@proxy.pt.com> <000701c1ad7c$b43cfbd0$6601010a@pcsysadmin> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: <000701c1ad7c$b43cfbd0$6601010a@pcsysadmin>; from rosti@tiltan-se.co.il on Mon, Feb 04, 2002 at 03:06:02PM +0200 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG There was a little mixup with the KDE stuff. Hence, various parts of KDE didn't make it onto the CD. -jj > > On Monday 04 February 2002 06:05, Rostislav wrote: > > > I just installed my new 4.5R box using the official CDs. It looks very > > > strange but I can't find any samba package in any of 4 CDs? Does someone > > > have any idea why the package wasn't included to CDs? In contrast, the > > > samba package exist in ftp. > > > > Did you check all 4 CDs? > > Yes I did. -- PGP: if encryption is a munition, where's my right to bear arms? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 13:30:14 2002 Delivered-To: freebsd-stable@freebsd.org Received: from netau1.alcanet.com.au (ntp.alcanet.com.au [203.62.196.27]) by hub.freebsd.org (Postfix) with ESMTP id 6318337B426 for ; Mon, 4 Feb 2002 13:30:05 -0800 (PST) Received: from mfg1.cim.alcatel.com.au (mfg1.cim.alcatel.com.au [139.188.23.1]) by netau1.alcanet.com.au (8.9.3 (PHNE_22672)/8.9.3) with ESMTP id IAA14780; Tue, 5 Feb 2002 08:30:03 +1100 (EDT) Received: from gsmx07.alcatel.com.au by cim.alcatel.com.au (PMDF V5.2-32 #37640) with ESMTP id <01KDWPWYRDQOVMIHVG@cim.alcatel.com.au>; Tue, 5 Feb 2002 08:30:02 +1100 Received: (from jeremyp@localhost) by gsmx07.alcatel.com.au (8.11.6/8.11.6) id g14LU0T86081; Tue, 05 Feb 2002 08:30:00 +1100 Content-return: prohibited Date: Tue, 05 Feb 2002 08:30:00 +1100 From: Peter Jeremy Subject: Re: FS gurus needed! (was: Strange lock-ups during backup over nfs after adding 1024M RAM) In-reply-to: <114283707399.20020204172833@ur.ru>; from sg@ur.ru on Mon, Feb 04, 2002 at 05:28:33PM +0500 To: Sergey Gershtein Cc: freebsd-stable@FreeBSD.ORG Mail-Followup-To: Sergey Gershtein , freebsd-stable@FreeBSD.ORG Message-id: <20020205083000.I72285@gsmx07.alcatel.com.au> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-disposition: inline User-Agent: Mutt/1.2.5i References: <20020126204941.H17540-100000@resnet.uoregon.edu> <1931130530386.20020128130947@ur.ru> <20020130073449.B78919@gsmx07.alcatel.com.au> <791310002584.20020130150111@ur.ru> <20020131111153.Y72285@gsmx07.alcatel.com.au> <1427021336.20020201123650@ur.ru> <20020204130730.B72285@gsmx07.alcatel.com.au> <114283707399.20020204172833@ur.ru> Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 2002-Feb-04 17:28:33 +0500, Sergey Gershtein wrote: >On Monday, February 04, 2002 Peter Jeremy wrote: >PJ> One oddity here is the Size - "FFS node" is used to allocate struct >PJ> inode's and they should be 256 bytes on i386. Are you using something >PJ> other than an i386 architecture? Unless this is a cut-and-paste >PJ> error, I suspect something is radically wrong with your kernel. > >Yes, it's i386 and it's not cut-and-paste error. Looking at your dmesg, you're running RELENG_4_4 - I has incorrectly assumed you were running RELENG_4. The size of struct inode has changed (it shrank by 4 bytes), meaning it's now 256 bytes instead of 260 bytes (which requires 512 bytes from the allocator). That explains that discrepancy. This is corrected in src/sys/ufs/ufs/inode.h,v 1.28.2.2. I think RELENG_4_4 also explains your problem: There was a problem that vnodes were being cached too long and there was effectively no upper limit on their number. I gather that under some conditions (which I don't recall, but you seem to have hit) the vnode cache (and underlying inode cache) would eat all the KVM. There were a variety of commits by Matt Dillon between October and early November that fixed this. Have a search through the archives for references to "kern.maxvnodes". I'd suggest that you look at moving to RELENG_4_5 or RELENG_4. This will halve the size of FFS node entries (which is most of your kernel memory) and allow you to limit it to something saner. >Hmm. Not sure what to do. Shell I try to play with kern.vm.kmem.size >or better not touch it? I'm not sure why there is a 200MB cap. Since your machine isn't short of physical memory (no swapping), I don't see any problem with increasing it to something like 500MB (which would be its uncapped value). Try adding "kern.vm.kmem.size=524288000" to /boot/loader.conf > I am now thinking that removing the extra >memory we've added is the best solution to the problem. I don't like >this solution though. I don't understand why you don't have the problem on the smaller box. >I don't expect the number of open files go beyond 1,000-1,500. The >only problem is accessing a lot (more than a 1,000,000) of small files >over NFS. But if I understand correctly, those files should be opened >and closed one by one, not all together. Is that right? The problem seems to be the vnode cache - which isn't being cleaned correctly. >PJ> Does "vfscache" have around the same number of InUse entries as "FFS node"? > >Yes, it seems so (see above). What does it mean? Most (all?) "FFS node" entries should be pointed to by vfscache (vnode) entries. If this isn't so, then there's a bug releasing inodes. Peter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 14:58:38 2002 Delivered-To: freebsd-stable@freebsd.org Received: from nothing-going-on.demon.co.uk (pc-62-31-42-140-hy.blueyonder.co.uk [62.31.42.140]) by hub.freebsd.org (Postfix) with ESMTP id 1BA9637B421; Mon, 4 Feb 2002 14:58:26 -0800 (PST) Received: (from nik@localhost) by nothing-going-on.demon.co.uk (8.11.6/8.11.6) id g14MfIj71420; Mon, 4 Feb 2002 22:41:18 GMT (envelope-from nik) Date: Mon, 4 Feb 2002 22:41:18 +0000 From: Nik Clayton To: Mike Gratton Cc: andrew.cowan@hsd.com.au, Mike Meyer , Terry Lambert , Juha Saarinen , "Brian T.Schellenberger" , Wilko Bulte , Paul Fardy , current@FreeBSD.ORG, stable@FreeBSD.ORG Subject: Re: Junior Annoying Hacker Task Message-ID: <20020204224118.N5732@clan.nothing-going-on.org> References: <3C5EA225.8070402@vee.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="+cfQkLQGU7KOA/8T" Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <3C5EA225.8070402@vee.net>; from mike@vee.net on Tue, Feb 05, 2002 at 01:30:53AM +1030 Organization: FreeBSD Project Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --+cfQkLQGU7KOA/8T Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, Feb 05, 2002 at 01:30:53AM +1030, Mike Gratton wrote: > > However, I have previously thought that a system that used xml files to > > store application configs (that would then be used to generate valid co= nf > > files) would be useful. >=20 > I was on the verge of doing so the other day. Basically, I wanted to=20 > have standard configuration data describing the network, services and=20 > service configuration stored in XML and use XSLT to produce which-ever=20 > config files you need. You then introduce some inheritance and allow=20 > configuration to be overridden for particular hosts, subnets, networks,= =20 > and/or platforms, and you have a powerful site-wide configuration=20 > management tool. Great minds and all that: http://people.freebsd.org/~nik/xml-servers/ I'm going to try and do a 5 minute 'Work in Progress' on this at BSDCon next week if anyone's interested. Feel free to take that as a starting point. N --=20 FreeBSD: The Power to Serve http://www.freebsd.org/ (__) FreeBSD Documentation Project http://www.freebsd.org/docproj/ \\\'',) \/ \= ^ --- 15B8 3FFC DDB4 34B0 AA5F 94B7 93A8 0764 2C37 E375 --- .\._/= _) --+cfQkLQGU7KOA/8T Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjxfDg4ACgkQk6gHZCw343XGjACeMJRqoZWI9c/rm6u/s78913pd DHEAnRTttr9t7Lr9DasC1g5pqTyEdU0C =upu6 -----END PGP SIGNATURE----- --+cfQkLQGU7KOA/8T-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 15:10:58 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mail.27in.tv (roc-66-24-112-7.rochester.rr.com [66.24.112.7]) by hub.freebsd.org (Postfix) with ESMTP id 5A9AA37B42A for ; Mon, 4 Feb 2002 15:10:34 -0800 (PST) Received: (from root@localhost) by mail.27in.tv (8.11.6/8.11.6) id g14NAVp03482; Mon, 4 Feb 2002 18:10:31 -0500 (EST) (envelope-from cjm2@earthling.net) Received: from maxpower (maxpower.lan.27in.tv [10.0.0.254]) by mail.27in.tv (8.11.6/8.11.6av) with SMTP id g14NATh03468; Mon, 4 Feb 2002 18:10:29 -0500 (EST) (envelope-from cjm2@earthling.net) From: "C J Michaels" To: "Greg Prosser" Cc: Subject: RE: dropping 127.* on the floor Date: Mon, 4 Feb 2002 18:10:36 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal In-Reply-To: <20020204100307.F12914-100000@voyager.straynet.com> X-Virus-Scanned: by AMaViS perl-11 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG From: Greg Prosser Sent: Monday, February 04, 2002 10:07 AM Subject: Re: dropping 127.* on the floor > > <...snip...> > According to the squid FAQ[1], they recommend using ipfw fwd rules > diverting traffic to 127.0.0.1 to transparently insert the cache server. > This behaviour is now broken, as ipfw rewrites the packet before it hits > the network stack, as does ipf, and both end up dropped. I've tested and > confirmed this on 4.5-STABLE, the rules in the FAQ did not work for me. Does squid's transparent proxying depending upon the packet being forwarded to the loopback? or can we just re-write the rule to push it down one of the other interfaces? > > -gnp > > [1] squid FAQ URL: http://www.squid-cache.org/Doc/FAQ/FAQ-17.html#ss17.8 --Chris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 15:29:14 2002 Delivered-To: freebsd-stable@freebsd.org Received: from cumin.apnic.net (cumin.apnic.net [202.12.29.59]) by hub.freebsd.org (Postfix) with ESMTP id 08B1837B42A for ; Mon, 4 Feb 2002 15:28:51 -0800 (PST) Received: from apnic.net (hadrian.apnic.net [202.12.29.249]) by cumin.apnic.net (8.12.1/8.12.1) with ESMTP id g14NNfKa015698 for ; Tue, 5 Feb 2002 09:23:42 +1000 To: freebsd-stable@freebsd.org Subject: Re: how to tell the kernel to use mfs in loader In-reply-to: Your message of "Mon, 04 Feb 2002 10:06:40 -0500." <15454.41856.576648.713774@grasshopper.cs.duke.edu> Date: Tue, 05 Feb 2002 09:28:47 +1000 Message-ID: <29347.1012865327@apnic.net> From: George Michaelson X-Scanned-By: MIMEDefang 2.1 (www dot roaringpenguin dot com slash mimedefang) Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > In the loader, set vfs.root.mountfrom=ufs:/dev/md0c > (or whatever the memory disk that the install uses is called). > > Drew This worked. Had to do it manually in loader, this value in loader.rc failed: set vfs.root.mountfrom="ufs:/dev/md0c" maybe the quotes were bad. Done directly at the prompt, it worked fine. Subsequently, ftp ftp://xxx.yyy.aaa.bbb/ failed, after I toasted my /root so I no longer have the image on the HD, and cannot repeat, and will now have to do a real install but the instructions above were fine! the manpage for loader.conf could do with this: it says words which imply ONLY a stated list of kernel params can be set, when it maybe need to be set to say "for example the following kernel values can be set..." And, this specific example is useful because load -t mfs_root is not of it self adequate to make a loaded kernel use MFS: the vfs.root.mountfrom is needed as well. cheers and thanks -George PS are people sure the /stand/sysinstall process can grok IP numbers direct in embedded FTP url's? I suspect it tried DNS lookup on the address I used (RFC1918, behind a cable router. I tested ftp to the host and it worked fine) -- George Michaelson | APNIC Email: ggm@apnic.net | PO Box 2131 Milton QLD 4064 Phone: +61 7 3367 0490 | Australia Fax: +61 7 3367 0482 | http://www.apnic.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 15:33:42 2002 Delivered-To: freebsd-stable@freebsd.org Received: from wwweasel.geeksrus.net (wwweasel.geeksrus.net [64.8.210.226]) by hub.freebsd.org (Postfix) with ESMTP id 9E34B37B42A for ; Mon, 4 Feb 2002 15:33:28 -0800 (PST) Received: (from alane@localhost) by wwweasel.geeksrus.net (8.11.6/8.11.6) id g13Ikra64007 for freebsd-stable@freebsd.org; Sun, 3 Feb 2002 13:46:53 -0500 (EST) (envelope-from alane) Date: Sun, 3 Feb 2002 13:46:53 -0500 From: Alan Eldridge To: freebsd-stable@FreeBSD.ORG Subject: snapshots/i386/4.4-20020202-STABLE?? Message-ID: <20020203184653.GA63994@wwweasel.geeksrus.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.25i X-message-flag: Magic 8-Ball says "Outlook not so good." I'll ask it about Exchange next. Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Umm, shouldn't the snapshot names be 4.5-YYYYMMDD-STABLE now? -- Alan Eldridge *Network Access Solutions hires the mentally handicapped. Call their customer service line for proof.* To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 15:57:18 2002 Delivered-To: freebsd-stable@freebsd.org Received: from marvin.nildram.co.uk (marvin.nildram.co.uk [195.112.4.71]) by hub.freebsd.org (Postfix) with SMTP id 73C2737B427 for ; Mon, 4 Feb 2002 15:57:13 -0800 (PST) Received: (qmail 6838 invoked from network); 4 Feb 2002 23:57:11 -0000 Received: from muttley.gotadsl.co.uk (HELO VicNBob) (213.208.123.26) by marvin.nildram.co.uk with SMTP; 4 Feb 2002 23:57:11 -0000 From: Matthew Whelan To: "Jacques A. Vidrine" , Ruslan Ermilov , Mike Tancsa Cc: stable@FreeBSD.ORG, Warner Losh Date: Mon, 04 Feb 2002 23:57:02 -0000 X-Priority: 3 (Normal) In-Reply-To: <5.1.0.14.0.20020204092437.050e66e0@marble.sentex.ca> Message-Id: Subject: Re: dropping 127.* on the floor MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" X-Mailer: Opera 6.0 build 1010 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG 04/02/2002 14:29:08, Mike Tancsa wrote: >What if this were dealt as part of firewall rules ? i.e. GENERIC was built >by default with IPFIREWALL and firewall_enable="YES" and >firewall_type="OPEN" were set. That way the behavior that people have come >to rely on is still there for those that need it. Well, some way of forcing a strong endpoint model would definitely be nice. Aren't the problems with trying to do it in ipfw/ipf effectively the same as with ip_output.c though (namely that the destination address has been re- written before inspection)? Matthew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 15:59: 3 2002 Delivered-To: freebsd-stable@freebsd.org Received: from ece.cmu.edu (ECE.CMU.EDU [128.2.136.200]) by hub.freebsd.org (Postfix) with ESMTP id 53B3F37B48D; Mon, 4 Feb 2002 15:58:30 -0800 (PST) Received: from pyanfar.ece.cmu.edu (allbery@VPN94.ECE.CMU.EDU [128.2.138.94]) (authenticated) by ece.cmu.edu (8.11.0/8.10.2) with ESMTP id g14NwEj24138; Mon, 4 Feb 2002 18:58:14 -0500 (EST) Subject: RE: Junior Annoying Hacker Task From: "Brandon S. Allbery " KF8NH To: Patrick Bihan-Faou Cc: current@FreeBSD.ORG, stable@FreeBSD.ORG In-Reply-To: References: Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Evolution/1.0.2 Date: 04 Feb 2002 18:58:04 -0500 Message-Id: <1012867098.8677.2.camel@pyanfar.ece.cmu.edu> Mime-Version: 1.0 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 2002-02-04 at 11:03, Patrick Bihan-Faou wrote: > Some may argue that storing userland data in the kernel space is Not A Nice > Thing(tm) but it certainly makes things a lot easier. Why am I reminded of when terminal type information was bodged into the stty settings as a 2-character code? -- brandon s. allbery [os/2][linux][solaris][japh] allbery@kf8nh.apk.net system administrator [WAY too many hats] allbery@ece.cmu.edu electrical and computer engineering KF8NH carnegie mellon university ["better check the oblivious first" -ke6sls] To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 17: 2: 7 2002 Delivered-To: freebsd-stable@freebsd.org Received: from netlx010.civ.utwente.nl (netlx010.civ.utwente.nl [130.89.1.92]) by hub.freebsd.org (Postfix) with ESMTP id 4798F37B426; Mon, 4 Feb 2002 17:01:59 -0800 (PST) Received: from solfertje.student.utwente.nl (wit399205.student.utwente.nl [130.89.236.35]) by netlx010.civ.utwente.nl (8.11.4/HKD) with ESMTP id g1511lk24761; Tue, 5 Feb 2002 02:01:47 +0100 Received: from solfertje.student.utwente.nl (localhost.student.utwente.nl [127.0.0.1]) by solfertje.student.utwente.nl (Postfix) with ESMTP id 128331D55; Tue, 5 Feb 2002 02:02:53 +0100 (CET) Date: Tue, 5 Feb 2002 02:02:50 +0100 (CET) From: Alban Hertroys Subject: RE: SB Live and 4.5-STABLE + UATA/100 HDD? To: Remington Cc: "'John Utz'" , freebsd-questions@FreeBSD.ORG, freebsd-stable@FreeBSD.ORG In-Reply-To: <009c01c1abbc$9b4b28c0$a5238bd8@blah> MIME-Version: 1.0 Content-Type: TEXT/plain; CHARSET=US-ASCII Message-Id: <20020205010253.128331D55@solfertje.student.utwente.nl> Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 1 Feb, Remington wrote: > I only plan on using my SB Live! Iyt is PCI, and I have tried diableing > my C-Media controller from the BIOS, couldn't find out how, I looked at > the mobo itself trying to find a jumper, couldn't find it. Tried > contacting ASUS(ppl that make my motherboard) but they failed to > respond. If anyone knows how please do tell. I am thinking it has Its somewhere between the PCI slots, very near to a chip labelled "C-media". It's undocumented, of course... I found that FreeBSD recognizes the device whether you disable it in the BIOS or not, so that's apparently no solution(?). Removing that jumper worked quite well, though. > something to do with the multiple sound devices but months ago I had it > working fine with with 4.4-RELEASE, and I don't think any of my hardware > has changed since then so yeah, there must be conflicts with my sound > devices. ANYONE that knows how to diable the C-Media control on the ASUS > A7M266 please help me out -- Alban Hertroys http://solfertje.student.utwente.nl - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - No, it's not a bug! It's a six-legged feature! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 17:48:55 2002 Delivered-To: freebsd-stable@freebsd.org Received: from snipe.prod.itd.earthlink.net (snipe.mail.pas.earthlink.net [207.217.120.62]) by hub.freebsd.org (Postfix) with ESMTP id 73AF137B421; Mon, 4 Feb 2002 17:48:50 -0800 (PST) Received: from user-2ivfo39.dialup.mindspring.com ([165.247.224.105] helo=gohan.cjclark.org) by snipe.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16Xuiw-0007OB-00; Mon, 04 Feb 2002 17:48:44 -0800 Received: (from cjc@localhost) by gohan.cjclark.org (8.11.6/8.11.6) id g151cPq05160; Mon, 4 Feb 2002 17:38:25 -0800 (PST) (envelope-from cjc) Date: Mon, 4 Feb 2002 17:38:25 -0800 From: "Crist J. Clark" To: Matthew Whelan Cc: "Jacques A. Vidrine" , Ruslan Ermilov , Mike Tancsa , stable@FreeBSD.ORG, Warner Losh Subject: Re: dropping 127.* on the floor Message-ID: <20020204173825.H3722@gohan.cjclark.org> Reply-To: cjclark@alum.mit.edu References: <5.1.0.14.0.20020204092437.050e66e0@marble.sentex.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from muttley@gotadsl.co.uk on Mon, Feb 04, 2002 at 11:57:02PM -0000 X-URL: http://people.freebsd.org/~cjc/ Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Feb 04, 2002 at 11:57:02PM -0000, Matthew Whelan wrote: > 04/02/2002 14:29:08, Mike Tancsa wrote: > > >What if this were dealt as part of firewall rules ? i.e. GENERIC was built > >by default with IPFIREWALL and firewall_enable="YES" and > >firewall_type="OPEN" were set. That way the behavior that people have come > >to rely on is still there for those that need it. > > Well, some way of forcing a strong endpoint model would definitely be nice. net.inet.ip.check_interface=1 > Aren't the problems with trying to do it in ipfw/ipf effectively the same as > with ip_output.c though (namely that the destination address has been re- > written before inspection)? There is a long discussion of this on cvs-all@ too. I think the current leaning is to take out the hardcoded block out (the recent change) and instead get the ifconfig(8) of lo0 to actually route things correctly. As for the old incoming block (almost a year ago), we may add a sysctl(8) to disable it, but it will still be on by default. -- Crist J. Clark | cjclark@alum.mit.edu | cjclark@jhu.edu http://people.freebsd.org/~cjc/ | cjc@freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 20:53:29 2002 Delivered-To: freebsd-stable@freebsd.org Received: from topperwein.dyndns.org (acs-24-154-28-168.zoominternet.net [24.154.28.168]) by hub.freebsd.org (Postfix) with ESMTP id 43F9637B423 for ; Mon, 4 Feb 2002 20:53:23 -0800 (PST) Received: from topperwein (topperwein [192.168.168.10]) by topperwein.dyndns.org (8.11.6/8.11.6) with ESMTP id g154rKG78122 for ; Mon, 4 Feb 2002 23:53:20 -0500 (EST) (envelope-from behanna@zbzoom.net) Date: Mon, 4 Feb 2002 23:53:15 -0500 (EST) From: Chris BeHanna Reply-To: Chris BeHanna To: FreeBSD-Stable Subject: Re: Two FBSD slices on one disk - losing mountpoints? In-Reply-To: <20020202050938.A9135@sheol.localdomain> Message-ID: <20020204234854.L77182-100000@topperwein.dyndns.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 2 Feb 2002, D J Hawkey Jr wrote: > > After reading the 4.5 Handbook, and searching with Google and FBSD's own > engines, I cannot find anything to soothe my apprehension about what I see: > > I have FBSD on ad0s2. I want FBSD 4.5-REL on ad0s1. 'fdisk' is no problem, > and neither is 'disklabel', EXCEPT that as I create the [FBSD] partitions > in ad0s1, the mountpoints in the existing ad0s2 disappear, and 'disklabel' > tells me I already have such-and-such mountpoint when I try to re-mount > the partitions in ad0s2. > > I'm talking about using 'sysinstall' on a booted 4.5-REL install CD, not > the command-line 'disklabel'. > > My question is: By creating new partitions in ad0s1, am I really losing > the existing mountpoints in ad0s2? If so, how do I restore 'em? Or am I > missing something fundamental here? The partitions should still be there, but you'll have trouble mounting a partition of the same name on top of an already-mounted partition. Try this: When you boot from ad0s1, mount the ad0s2 partitions under /disk2. When you boot from ad0s2, mount the ad0s1 partitions under /disk1. This implies differing fstabs in ad0s1 and ad0s2. No biggie. It's been awhile since I used sysinstall's disklabel. If you can mark a partition to not be mounted automatically, do it on the partition you're not about to boot. Then you can edit /etc/fstab by hand in ad0s1, mkdir /disk2, and mount the ad0s2 partitions under /disk2. Then edit /disk2/etc/fstab and do the same for ad0s1 and /disk1, as suggested above. Worst case, boot from the live filesystem and fix the stuff by hand on-the-fly (bitter PITA when moving your boot device from the onboard controller to a Promise card, let me tell you!). -- Chris BeHanna Software Engineer (Remove "bogus" before responding.) behanna@bogus.zbzoom.net I was raised by a pack of wild corn dogs. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 20:55:32 2002 Delivered-To: freebsd-stable@freebsd.org Received: from topperwein.dyndns.org (acs-24-154-28-168.zoominternet.net [24.154.28.168]) by hub.freebsd.org (Postfix) with ESMTP id 9B2EE37B429 for ; Mon, 4 Feb 2002 20:55:28 -0800 (PST) Received: from topperwein (topperwein [192.168.168.10]) by topperwein.dyndns.org (8.11.6/8.11.6) with ESMTP id g154tVG78184 for ; Mon, 4 Feb 2002 23:55:31 -0500 (EST) (envelope-from behanna@zbzoom.net) Date: Mon, 4 Feb 2002 23:55:26 -0500 (EST) From: Chris BeHanna Reply-To: Chris BeHanna To: FreeBSD-Stable Subject: Re: 4.5 panic In-Reply-To: <20020202124805.A384@bsd.hu> Message-ID: <20020204235441.S77182-100000@topperwein.dyndns.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=US-ASCII Content-ID: <20020204235441.D77182@topperwein.dyndns.org> Content-Disposition: INLINE Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 2 Feb 2002, Miklos Niedermayer wrote: > i'm experiencing panics with 4.5-RELEASE. The previous machine was > unstable with releng_4_4, so i replaced the majority of the hardware > (and updated to releng_4_5) but it crashed again. > > dmesg and gdb -k output is attached, let me know if you need anything > else. The main thing would be to decide whether this is (still) hardware > problem or not. Just a WAG, but have you built an SMP kernel for a UP machine? -- Chris BeHanna Software Engineer (Remove "bogus" before responding.) behanna@bogus.zbzoom.net I was raised by a pack of wild corn dogs. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 21: 6:50 2002 Delivered-To: freebsd-stable@freebsd.org Received: from topperwein.dyndns.org (acs-24-154-28-168.zoominternet.net [24.154.28.168]) by hub.freebsd.org (Postfix) with ESMTP id 03C0A37B404 for ; Mon, 4 Feb 2002 21:06:42 -0800 (PST) Received: from topperwein (topperwein [192.168.168.10]) by topperwein.dyndns.org (8.11.6/8.11.6) with ESMTP id g1556iG78321 for ; Tue, 5 Feb 2002 00:06:45 -0500 (EST) (envelope-from behanna@zbzoom.net) Date: Tue, 5 Feb 2002 00:06:39 -0500 (EST) From: Chris BeHanna Reply-To: Chris BeHanna To: FreeBSD-Stable Subject: Handholding Editor for rc.conf Message-ID: <20020204235829.D77182-100000@topperwein.dyndns.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=ISO-8859-1 Content-Transfer-Encoding: 8BIT Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > [...flamage re "registry editor" for FreeBSD snipped...] A syntax-aware editor (e.g., vim) will tell you right away when you have mismatched quotes (be they single or double). It won't prevent you from shooting yourself in the foot by writing the file anyway, but it will at least give you some warning. It might be neat to have a heirarchy for rc variables, but "neat" should be tempered by "does it buy us sufficient functionality to be worth the effort invested and the complexity introduced"? Terry's point about doing syntax-checking on rc.conf before the editor lets you exit (a lá vipw or visudo) for administering a remote box is, however, well-taken. The beauty is that a smart enough editor to do that is also smart enough to syntax-check rc.firewall, saving an admin numerous "call the NOC and talk them through fixing the problem" headaches. I should think that it should be a SMOP to add some macros to vim to do this, given that vim is already sh-syntax aware, and rc.conf and rc.firewall are merely shell scripts. That said, vim isn't part of the base system. I think that a vim add-on in ports/sysutils to do this would satisfy nearly all but the heathen emacs users. :-) I'm not a committer (I'm "just" my company's RE), so feel free to file this to /dev/null. -- Chris BeHanna Software Engineer (Remove "bogus" before responding.) behanna@bogus.zbzoom.net I was raised by a pack of wild corn dogs. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 23: 3:15 2002 Delivered-To: freebsd-stable@freebsd.org Received: from zeus.nordnet.ru (zeus.nordnet.ru [213.150.64.3]) by hub.freebsd.org (Postfix) with ESMTP id 199E337B426 for ; Mon, 4 Feb 2002 23:03:09 -0800 (PST) Received: from tarn.noc.ctk.ru (CrasotinPA.noc.ctk.ru [213.150.66.11]) by zeus.nordnet.ru (8.11.1/8.11.1) with ESMTP id g15736t47940 for ; Tue, 5 Feb 2002 10:03:07 +0300 (MSK) Date: Tue, 5 Feb 2002 10:03:04 +0300 From: Pavel A Crasotin X-Mailer: The Bat! (v1.53d) Reply-To: Pavel A Crasotin Organization: OJSC SeverTransCom X-Priority: 3 (Normal) Message-ID: <861302284055.20020205100304@ctk.ru> To: stable@FreeBSD.ORG Subject: Kernel with specific name MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, is it possible to make (and install) kernel with specific name, eg. kernel.GENERAL? Not just kernel. With respect, Pavel A Crasotin ____________________________________ OJSC SeverTransCom 40/13 Sobinova, Yaroslavl, 150000, Russia Tel/Fax: +7 (0852) 47-71-70, 47-69-49 +7 (0852) 72-17-28, 72-17-38 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 23:19:26 2002 Delivered-To: freebsd-stable@freebsd.org Received: from david.siemens.de (david.siemens.de [192.35.17.14]) by hub.freebsd.org (Postfix) with ESMTP id 1A44737B417 for ; Mon, 4 Feb 2002 23:19:21 -0800 (PST) Received: from mail1.siemens.de (mail1.siemens.de [139.23.33.14]) by david.siemens.de (8.11.6/8.11.6) with ESMTP id g157JJO25638 for ; Tue, 5 Feb 2002 08:19:19 +0100 (MET) Received: from mars.cert.siemens.de (ust.mchp.siemens.de [139.23.201.17]) by mail1.siemens.de (8.11.6/8.11.6) with ESMTP id g157JJp08396 for ; Tue, 5 Feb 2002 08:19:19 +0100 (MET) Received: from reims.mchp.siemens.de (alaska [139.23.202.134]) by mars.cert.siemens.de (8.12.2/8.12.1/Siemens CERT [ $Revision: 1.22 ]) with ESMTP id g157JId9000979 for ; Tue, 5 Feb 2002 08:19:19 +0100 (CET) Received: from reims.mchp.siemens.de (localhost [127.0.0.1]) by reims.mchp.siemens.de (8.12.2/8.12.2/alaska [ $Revision: 1.10 ]) with ESMTP id g157JIiw093229 for ; Tue, 5 Feb 2002 08:19:18 +0100 (CET) Received: (from ust@localhost) by reims.mchp.siemens.de (8.12.2/8.12.2/alaska [ $Revision: 1.2 ]) id g157JIti093228 for freebsd-stable@freebsd.org; Tue, 5 Feb 2002 08:19:18 +0100 (CET) Date: Tue, 5 Feb 2002 08:19:18 +0100 From: Udo Schweigert To: freebsd-stable@freebsd.org Subject: Crash on 4.5-RELEASE Message-ID: <20020205071918.GA92658@alaska.cert.siemens.de> Mail-Followup-To: freebsd-stable@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-15 Content-Disposition: inline User-Agent: Mutt/1.3.27i X-Operating-System: FreeBSD 4.5-STABLE Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, after an uptime of 7d10h44m0s I got a panic on my 4.5-RELEASE box (while 4.4-RELEASE was running without a crash for 4 months). Unfortunately I hadn't a debug-kernel running (which I now have). But maybe someone has a clue what's going on: gdb -k kernel.0 vmcore.0: ... (no debugging symbols found)... IdlePTD at phsyical address 0x00366000 initial pcb at physical address 0x002d5500 panicstr: page fault panic messages: --- Fatal trap 12: page fault while in kernel mode fault virtual address = 0x28 fault code = supervisor read, page not present instruction pointer = 0x8:0xc01d655d stack pointer = 0x10:0xc02b1428 frame pointer = 0x10:0xc02b1444 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = Idle interrupt mask = trap number = 12 panic: page fault syncing disks... Fatal trap 12: page fault while in kernel mode fault virtual address = 0x30 fault code = supervisor read, page not present instruction pointer = 0x8:0xc021c678 stack pointer = 0x10:0xc02b1214 frame pointer = 0x10:0xc02b121c code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = Idle interrupt mask = bio trap number = 12 panic: page fault Uptime: 7d10h44m0s dumping to dev #da/0x20001 And: bt #0 0xc017be0a in dumpsys () #1 0xc017bc1f in boot () #2 0xc017c000 in poweroff_wait () #3 0xc026dc5a in trap_fatal () #4 0xc026d92d in trap_pfault () #5 0xc026d517 in trap () #6 0xc021c678 in acquire_lock () #7 0xc02206dc in softdep_update_inodeblock () #8 0xc021b7c1 in ffs_update () #9 0xc02250f5 in ffs_fsync () #10 0xc0223a03 in ffs_sync () #11 0xc01a98a3 in sync () #12 0xc017b9d2 in boot () #13 0xc017c000 in poweroff_wait () #14 0xc026dc5a in trap_fatal () #15 0xc026d92d in trap_pfault () #16 0xc026d517 in trap () #17 0xc01d655d in syncache_socket () #18 0xc01d66a4 in syncache_expand () #19 0xc01d2220 in tcp_input () #20 0xc01ce4f1 in ip_input () #21 0xc01ce54f in ipintr () If it occurs again I can give more infos out of the debug kernel. Best regards -- Udo Schweigert, Siemens AG | Voice : +49 89 636 42170 CT IC 3, Siemens CERT | Fax : +49 89 636 41166 D-81730 Muenchen / Germany | email : udo.schweigert@siemens.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Feb 4 23:38:28 2002 Delivered-To: freebsd-stable@freebsd.org Received: from arrakis.niedermayer.com (dial-428.digitel2002.hu [213.163.28.46]) by hub.freebsd.org (Postfix) with ESMTP id 779E237B422 for ; Mon, 4 Feb 2002 23:38:08 -0800 (PST) Received: from [fec0:ff:0:5::2] (helo=niedermayer.com) by arrakis.niedermayer.com with esmtp (Exim 3.33 #1) id 16Y0Cz-0000FT-00 for stable@freebsd.org; Tue, 05 Feb 2002 08:40:05 +0100 Received: (qmail 953 invoked by uid 1003); 5 Feb 2002 07:40:04 -0000 Date: Tue, 5 Feb 2002 08:40:04 +0100 From: Miklos Niedermayer To: Chris BeHanna Cc: FreeBSD-Stable Subject: lockmgr: locking against myself (was Re: 4.5 panic) Message-ID: <20020205084004.A365@bsd.hu> References: <20020202124805.A384@bsd.hu> <20020204235441.S77182-100000@topperwein.dyndns.org> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="tThc/1wpZn/ma/RB" Content-Disposition: inline In-Reply-To: <20020204235441.S77182-100000@topperwein.dyndns.org> Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --tThc/1wpZn/ma/RB Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi, On Mon, Feb 04, 2002 at 11:55:26PM -0500, Chris BeHanna wrote: > Just a WAG, but have you built an SMP kernel for a UP machine? No, it's an UP kernel. Kernel config is attached. I can make vmcore and kernel.debug available if anyone has time to take a look at it, as this would be a production server if the crashes didn't happen :( ______ o _. __ / / / (_(_(__(_) @ bsd.hu --tThc/1wpZn/ma/RB Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=Lappi machine i386 cpu I686_CPU ident Lappi maxusers 0 makeoptions DEBUG=-g options MAXDSIZ="(512*1024*1024)" options MAXSSIZ="(512*1024*1024)" options DFLDSIZ="(256*1024*1024)" options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # Firewall options IPFILTER options IPFILTER_LOG options TCP_DROP_SYNFIN options ICMP_BANDLIM #Rate limit bad replies options NMBCLUSTERS=16384 options NBUF=4096 device isa device pci # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices options SYM_SETUP_LP_PROBE_MAP=0x40 # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? pseudo-device splash device sc0 at isa? flags 0x100 device npx0 at nexus? port IO_NPX irq 13 device apm0 at nexus? disable flags 0x20 # Advanced Power Management # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 device rl # RealTek 8129/8139 device dc device tx device miibus pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) pseudo-device bpf #Berkeley packet filter pseudo-device vn options HZ=1000 options RANDOM_IP_ID options ACCEPT_FILTER_HTTP options UFS_DIRHASH options QUOTA --tThc/1wpZn/ma/RB Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="gdb.out" Content-Transfer-Encoding: quoted-printable GNU gdb 4.18 Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain condition= s. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-unknown-freebsd"... IdlePTD at phsyical address 0x003be000 initial pcb at physical address 0x002af480 panicstr: lockmgr: locking against myself panic messages: --- panic: lockmgr: locking against myself syncing disks... 90 22 10 7 5 2=20 done Uptime: 3d21h37m24s dumping to dev #da/0x20009, offset 524448 dump 767 766 765 764 763 762 761 760 759 758 757 756 755 754 753 752 751 75= 0 749 748 747 746 745 744 743 742 741 740 739 738 737 736 735 734 733 732 7= 31 730 729 728 727 726 725 724 723 722 721 720 719 718 717 716 715 714 713 = 712 711 710 709 708 707 706 705 704 703 702 701 700 699 698 697 696 695 694= 693 692 691 690 689 688 687 686 685 684 683 682 681 680 679 678 677 676 67= 5 674 673 672 671 670 669 668 667 666 665 664 663 662 661 660 659 658 657 6= 56 655 654 653 652 651 650 649 648 647 646 645 644 643 642 641 640 639 638 = 637 636 635 634 633 632 631 630 629 628 627 626 625 624 623 622 621 620 619= 618 617 616 615 614 613 612 611 610 609 608 607 606 605 604 603 602 601 60= 0 599 598 597 596 595 594 593 592 591 590 589 588 587 586 585 584 583 582 5= 81 580 579 578 577 576 575 574 573 572 571 570 569 568 567 566 565 564 563 = 562 561 560 559 558 557 556 555 554 553 552 551 550 549 548 547 546 545 544= 543 542 541 540 539 538 537 536 535 534 533 532 531 530 529 528 527 526 52= 5 524 523 522 ! 521 520 519 518 517 516 515 514 51 3 512 511 510 509 508 507 506 505 504 503 502 501 500 499 498 497 496 495 4= 94 493 492 491 490 489 488 487 486 485 484 483 482 481 480 479 478 477 476 = 475 474 473 472 471 470 469 468 467 466 465 464 463 462 461 460 459 458 457= 456 455 454 453 452 451 450 449 448 447 446 445 444 443 442 441 440 439 43= 8 437 436 435 434 433 432 431 430 429 428 427 426 425 424 423 422 421 420 4= 19 418 417 416 415 414 413 412 411 410 409 408 407 406 405 404 403 402 401 = 400 399 398 397 396 395 394 393 392 391 390 389 388 387 386 385 384 383 382= 381 380 379 378 377 376 375 374 373 372 371 370 369 368 367 366 365 364 36= 3 362 361 360 359 358 357 356 355 354 353 352 351 350 349 348 347 346 345 3= 44 343 342 341 340 339 338 337 336 335 334 333 332 331 330 329 328 327 326 = 325 324 323 322 321 320 319 318 317 316 315 314 313 312 311 310 309 308 307= 306 305 304 303 302 301 300 299 298 297 296 295 294 293 292 291 290 289 28= 8 287 286 285 284 283 282 281 280 279 278 277 276 275 274 273 272 271 270 2= 69 268 267 266! 265 264 263 262 261 260 259 258 2 57 256 255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240 239 = 238 237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220= 219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 20= 1 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 1= 82 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 = 163 162 161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145= 144 143 142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 12= 6 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 1= 07 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85= 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60= 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35= 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10= 9 8 7 6 5 4 3 2 1 0=20 --- #0 dumpsys () at /usr/src/sys/kern/kern_shutdown.c:474 474 printf("Dump already in progress, bailing...\n"); (kgdb) where #0 dumpsys () at /usr/src/sys/kern/kern_shutdown.c:474 #1 0xc016c3b0 in boot (howto=3D256) at /usr/src/sys/kern/kern_shutdown.c:3= 13 #2 0xc016c79c in poweroff_wait (junk=3D0xc0267900, howto=3D-1070893428) at /usr/src/sys/kern/kern_shutdown.c:582 #3 0xc0166e0f in lockmgr (lkp=3D0xc02b76bc, flags=3D2, interlkp=3D0x0, p= =3D0xda378920) at /usr/src/sys/kern/kern_lock.c:337 #4 0xc02115a8 in vm_map_remove (map=3D0xc02b768c, start=3D3751591936,=20 end=3D3755786240) at /usr/src/sys/vm/vm_map.c:1949 #5 0xc020f376 in kmem_free (map=3D0xc02b768c, addr=3D3751591936, size=3D41= 94304) at /usr/src/sys/vm/vm_kern.c:233 #6 0xc0324e7a in ?? () #7 0xc032524d in ?? () #8 0xc023dd9a in set_mode (scp=3D0xc02bf980) at /usr/src/sys/dev/syscons/syscons.c:3285 #9 0xc023c152 in restore_scrn_saver_mode (scp=3D0xc02bf980, changemode=3D1) at /usr/src/sys/dev/syscons/syscons.c:1989 #10 0xc023bf5d in scsplash_saver (sc=3D0xc02c4f00, show=3D0) at /usr/src/sys/dev/syscons/syscons.c:1876 #11 0xc023c1bb in stop_scrn_saver (sc=3D0xc02c4f00,=20 saver=3D0xc023bea0 ) at /usr/src/sys/dev/syscons/syscons.c:2007 #12 0xc023b9ee in scrn_timer (arg=3D0xc02c4f00) at /usr/src/sys/dev/syscons/syscons.c:1648 #13 0xc017223d in softclock () at /usr/src/sys/kern/kern_timeout.c:131 #14 0xc0242860 in splz_swi () #15 0xc0249df7 in pmap_remove_pte (pmap=3D0xc02c4a60, ptq=3D0xbff7f8ec,=20 va=3D3756240896) at /usr/src/sys/i386/i386/pmap.c:1678 #16 0xc0249f3e in pmap_remove (pmap=3D0xc02c4a60, sva=3D3756240896, eva=3D3= 756257280) at /usr/src/sys/i386/i386/pmap.c:1802 ---Type to continue, or q to quit--- #17 0xc02114d8 in vm_map_delete (map=3D0xc02b768c, start=3D3756240896,=20 end=3D3756257280) at /usr/src/sys/vm/vm_map.c:1903 #18 0xc02115cd in vm_map_remove (map=3D0xc02b768c, start=3D3756240896,=20 end=3D3756257280) at /usr/src/sys/vm/vm_map.c:1951 #19 0xc020f376 in kmem_free (map=3D0xc02b768c, addr=3D3756240896, size=3D16= 384) at /usr/src/sys/vm/vm_kern.c:233 #20 0xc017d51d in pipe_free_kmem (cpipe=3D0xdf198620) at /usr/src/sys/kern/sys_pipe.c:1165 #21 0xc017d69b in pipeclose (cpipe=3D0xdf198620) at /usr/src/sys/kern/sys_pipe.c:1221 #22 0xc017d4de in pipe_close (fp=3D0xc5588cc0, p=3D0xda378920) at /usr/src/sys/kern/sys_pipe.c:1152 #23 0xc0162b9c in fdrop (fp=3D0xc5588cc0, p=3D0xda378920) at /usr/src/sys/sys/file.h:217 #24 0xc0162ae3 in closef (fp=3D0xc5588cc0, p=3D0xda378920) at /usr/src/sys/kern/kern_descrip.c:1220 #25 0xc0162021 in close (p=3D0xda378920, uap=3D0xda380f80) at /usr/src/sys/kern/kern_descrip.c:581 #26 0xc024ce62 in syscall2 (frame=3D{tf_fs =3D 47, tf_es =3D 47, tf_ds =3D = 47,=20 tf_edi =3D 0, tf_esi =3D 672995984, tf_ebp =3D -1077937928,=20 tf_isp =3D -633860140, tf_ebx =3D 672922148, tf_edx =3D 0, tf_ecx =3D= 672995984,=20 tf_eax =3D 6, tf_trapno =3D 7, tf_err =3D 2, tf_eip =3D 672876044, tf= _cs =3D 31,=20 tf_eflags =3D 647, tf_esp =3D -1077937972, tf_ss =3D 47}) at /usr/src/sys/i386/i386/trap.c:1157 #27 0xc02413a5 in Xint0x80_syscall () #28 0x281a2328 in ?? () #29 0x28084b47 in ?? () #30 0x28084936 in ?? () #31 0x280bd2a0 in ?? () ---Type to continue, or q to quit--- #32 0x280bcd34 in ?? () #33 0x28081965 in ?? () #34 0x2807fe71 in ?? () #35 0x2807ffa5 in ?? () #36 0x2807fdd5 in ?? () #37 0x28092e93 in ?? () #38 0x28094bb8 in ?? () #39 0x2809485f in ?? () #40 0x280955fa in ?? () #41 0x80484ea in ?? () #42 0x8048445 in ?? () (kgdb) up #1 0xc016c3b0 in boot (howto=3D256) at /usr/src/sys/kern/kern_shutdown.c:3= 13 313 dumpsys(); (kgdb) up #2 0xc016c79c in poweroff_wait (junk=3D0xc0267900, howto=3D-1070893428) at /usr/src/sys/kern/kern_shutdown.c:582 582 } (kgdb) up #3 0xc0166e0f in lockmgr (lkp=3D0xc02b76bc, flags=3D2, interlkp=3D0x0, p= =3D0xda378920) at /usr/src/sys/kern/kern_lock.c:337 337 if ((extflags & LK_CANRECURSE) !=3D 0) { (kgdb) list 332 /* 333 * Recursive lock. 334 */ 335 if ((extflags & (LK_NOWAIT | LK_CANRECURSE)) =3D=3D 0) 336 panic("lockmgr: locking against myself"); 337 if ((extflags & LK_CANRECURSE) !=3D 0) { 338 lkp->lk_exclusivecount++; 339 COUNT(p, 1); 340 break; 341 } (kgdb) up #4 0xc02115a8 in vm_map_remove (map=3D0xc02b768c, start=3D3751591936,=20 end=3D3755786240) at /usr/src/sys/vm/vm_map.c:1949 1949=09 (kgdb) list=08 =08=08 =08=08 =08=08 =08=07=07=07=07=07=07=07=07=07=07=07up #5 0xc020f376 in kmem_free (map=3D0xc02b768c, addr=3D3751591936, size=3D41= 94304) at /usr/src/sys/vm/vm_kern.c:233 233 (void) vm_map_remove(map, trunc_page(addr), round_page(addr + size)); (kgdb) up #6 0xc0324e7a in ?? () (kgdb) up #7 0xc032524d in ?? () (kgdb) up #8 0xc023dd9a in set_mode (scp=3D0xc02bf980) at /usr/src/sys/dev/syscons/syscons.c:3285 3285 sc_vtb_init(&scp->scr, VTB_FRAMEBUFFER, scp->xsize, scp->ysize, (kgdb) quit --tThc/1wpZn/ma/RB-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Tue Feb 5 2: 4:14 2002 Delivered-To: freebsd-stable@freebsd.org Received: from cobra.east.ru (cobra.east.ru [195.170.36.227]) by hub.freebsd.org (Postfix) with ESMTP id D115B37B421 for ; Tue, 5 Feb 2002 02:04:07 -0800 (PST) Received: by cobra.east.ru (Postfix, from userid 426) id 2AA5A3191A; Tue, 5 Feb 2002 13:04:06 +0300 (MSK) Received: from east.ru (tima.east.ru [195.170.33.22]) by cobra.east.ru (Postfix) with ESMTP id D0EF731919 for ; Tue, 5 Feb 2002 13:04:05 +0300 (MSK) Message-ID: <3C5FAE15.4070805@east.ru> Date: Tue, 05 Feb 2002 13:04:05 +0300 From: Timur Maryin Organization: East Connection User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.8+) Gecko/20020130 X-Accept-Language: ru, en MIME-Version: 1.0 To: stable@freebsd.org Subject: BLANK_CMD - ILLEGAL REQUES Content-Type: text/plain; charset=KOI8-R; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi! What is it ? == cut == Feb 5 11:31:49 ns2 /kernel: acd0: BLANK_CMD - ILLEGAL REQUEST asc=30 ascq=00 error=04 == cut == bash-2.05$ uname -a FreeBSD ..... 4.4-STABLE FreeBSD 4.4-STABLE #0: Mon Sep 24 18:14:34 MSD 2001 Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-STABLE #0: Mon Sep 24 18:14:34 MSD 2001 Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (451.03-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff real memory = 134205440 (131060K bytes) avail memory = 127488000 (124500K bytes) Preloaded elf kernel "kernel" at 0xc0326000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 6 entries at 0xc00f0c70 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib2: at device 1.0 on pci0 pci1: on pcib2 pci1: at 0.0 irq 11 isab0: at device 4.0 on pci0 isa0: on isab0 atapci0: port 0xd800-0xd80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at 4.2 irq 5 xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xd000-0xd03f irq 10 at device 10.0 on pci0 xl0: Ethernet address: 00:60:08:9c:10:4b miibus0: on xl0 nsphy0: on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib1: on motherboard pci2: on pcib1 orm0:
Hello there.
It's already known fact that some = packages (samba=20 for example) are missing in official ISOs. So, is there any plans = to=20 reproduce the ISOs or maybe release new 4.5.1 RELEASE version, like = 4.1.1=20 some time before?
 
Thanks.
------=_NextPart_000_0007_01C1AEFA.E4203EA0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 0:45:40 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mailout11.sul.t-online.com (mailout11.sul.t-online.com [194.25.134.85]) by hub.freebsd.org (Postfix) with ESMTP id 1F17537B405 for ; Wed, 6 Feb 2002 00:45:37 -0800 (PST) Received: from fwd09.sul.t-online.de by mailout11.sul.t-online.com with smtp id 16YNhw-0005cS-03; Wed, 06 Feb 2002 09:45:36 +0100 Received: from pc5.abc (520067998749-0001@[217.233.117.245]) by fmrl09.sul.t-online.com with esmtp id 16YNhm-0Ds8yuC; Wed, 6 Feb 2002 09:45:26 +0100 Received: (from nicolas@localhost) by pc5.abc (8.11.6/8.11.6) id g168jGv01468; Wed, 6 Feb 2002 09:45:16 +0100 (CET) (envelope-from list@rachinsky.de) Date: Wed, 6 Feb 2002 09:45:15 +0100 From: Nicolas Rachinsky To: Mike Meyer Cc: Terry Lambert , stable@FreeBSD.ORG Subject: Re: Junior Annoying Hacker Task Message-ID: <20020206084515.GA1448@pc5.abc> Mail-Followup-To: Mike Meyer , Terry Lambert , stable@FreeBSD.ORG References: <20020203040623.13CEF407B@i8k.babbleon.org> <5F46C986-16DB-11D6-8CEC-00039359034A@mac.com> <20020202110330.C16801@freebie.xs4all.nl> <3C5BCA46.713B1950@mindspring.com> <20020202145852.6781C407B@i8k.babbleon.org> <3C5CA666.9BC2BC06@mindspring.com> <15452.50112.625066.914576@guru.mired.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <15452.50112.625066.914576@guru.mired.org> User-Agent: Mutt/1.3.27i X-Powered-by: FreeBSD X-Homepage: http://www.rachinsky.de X-PGP-Keyid: C11ABC0E X-PGP-Fingerprint: 19DB 8392 8FE0 814A 7362 EEBD A53B 526A C11A BC0E X-PGP-Key: http://www.rachinsky.de/nicolas/nicolas_rachinsky.asc X-Sender: 520067998749-0001@t-dialin.net Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG * On Sat, Feb 02, 2002 at 10:59:44PM -0600, * Mike Meyer wrote: > The problem with the registry is not that it's a single place that > tries to control everything. The problem with the registry is that you > have to have a large chunk of the system functioning in order to fix > things in it should it break - which, from what I've seen, happens all > to frequently. Compare this to unix, where all you need is the kernel, > init, sh and ed - and sufficiently clever people may be able to do it > without init. Just being interessted, how are you able to start sh without having init? I tried "set init_path=/bin/sh" in the loader but that didn't work. Another question, / is mounted read-only, how to remount it read-write without having mount? Not that I need it in the moment, but I'm interessted how that would work. Thanks Nicolas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 1: 4: 7 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mile.nevermind.kiev.ua (freebsddiary.org.ua [213.186.199.26]) by hub.freebsd.org (Postfix) with ESMTP id DA66A37B419 for ; Wed, 6 Feb 2002 01:03:59 -0800 (PST) Received: (from never@localhost) by mile.nevermind.kiev.ua (8.11.6/8.11.4) id g1694KH96536; Wed, 6 Feb 2002 11:04:20 +0200 (EET) (envelope-from never) Date: Wed, 6 Feb 2002 11:04:20 +0200 From: Nevermind To: JJ Behrens Cc: Rossam Souza Silva , freebsd-stable@FreeBSD.ORG Subject: Re: KDE mixup: was samba package Message-ID: <20020206090420.GB61267@nevermind.kiev.ua> References: <20020204122425.A27402@alicia.nttmcl.com> <20020205123552.A634@alicia.nttmcl.com> Mime-Version: 1.0 Content-Type: text/plain; charset=koi8-r Content-Disposition: inline In-Reply-To: <20020205123552.A634@alicia.nttmcl.com> User-Agent: Mutt/1.3.26i Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, JJ Behrens! On Tue, Feb 05, 2002 at 12:35:52PM -0800, you wrote: > > Sure. Why the kde meta-package was left out?? > > There was an unfortunate accident. The FreeBSD KDE team was attempting to > reduce the amount of KDE material on the first CD, and (accidentally) the > material didn't make it onto any of the CD's. Maybe we should do better checking of -RELEASE for this? I see the strange things doing since 4.1, we are getting closer and closer to those linux kIdZ, who does not care how thier code works, wether their gcc 3.x.x will work with all stuff and produce a good code, and so on. Not icluding KDE, samba and, I suppose, a lot of other primary packages onto ISOs, which have gone for producing CDs is a VERY bad thing. Don't became linux, we are better! P.S. Just my 0.02 UAH -- NEVE-RIPE To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 1:10:11 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mile.nevermind.kiev.ua (freebsddiary.org.ua [213.186.199.26]) by hub.freebsd.org (Postfix) with ESMTP id B7B3D37B423 for ; Wed, 6 Feb 2002 01:10:00 -0800 (PST) Received: (from never@localhost) by mile.nevermind.kiev.ua (8.11.6/8.11.4) id g169AxW96612; Wed, 6 Feb 2002 11:10:59 +0200 (EET) (envelope-from never) Date: Wed, 6 Feb 2002 11:10:58 +0200 From: Nevermind To: Rostislav Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Official ISOs Message-ID: <20020206091058.GC61267@nevermind.kiev.ua> References: <000a01c1aeea$21bf25c0$6601010a@pcsysadmin> Mime-Version: 1.0 Content-Type: text/plain; charset=koi8-r Content-Disposition: inline In-Reply-To: <000a01c1aeea$21bf25c0$6601010a@pcsysadmin> User-Agent: Mutt/1.3.26i Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, Rostislav! On Wed, Feb 06, 2002 at 10:41:53AM +0200, you wrote: > > Hello there. > > It's already known fact that some packages (samba for example) are > missing in official ISOs. So, is there any plans to reproduce the ISOs > or maybe release new 4.5.1 RELEASE version, like 4.1.1 some time > before? As far as I remember the only reason for 4.1.1 was: RSA Security has waived all patent rights to the RSA algorithm (two weeks before the patent was due to expire). As a result, the native OpenSSL implementation of the RSA algorithm is now activated by default, and the rsaref port and librsaUSA are no longer required for USA residents. But I'd like to see all this KDE/samba/etc. missing fixed. -- NEVE-RIPE To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 1:11:29 2002 Delivered-To: freebsd-stable@freebsd.org Received: from dream.mplik.ru (dream.mplik.ru [195.58.1.132]) by hub.freebsd.org (Postfix) with ESMTP id E211B37B428 for ; Wed, 6 Feb 2002 01:11:21 -0800 (PST) Received: from sight (sight.mplik.ru [195.58.27.104]) by dream.mplik.ru (8.9.3/8.9.1) with ESMTP id OAA34434 for ; Wed, 6 Feb 2002 14:11:20 +0500 (YEKT) Date: Wed, 6 Feb 2002 14:11:18 +0500 From: Sergey Gershtein X-Mailer: The Bat! (v1.53bis) Business Reply-To: Sergey Gershtein Organization: Ural Relcom Ltd X-Priority: 3 (Normal) Message-ID: <267744325.20020206141118@ur.ru> To: stable@FreeBSD.ORG Subject: Re[2]: FS gurus needed! (was: Strange lock-ups during backup over nfs after adding 1024M RAM) In-Reply-To: <20020205083000.I72285@gsmx07.alcatel.com.au> References: <20020126204941.H17540-100000@resnet.uoregon.edu> <1931130530386.20020128130947@ur.ru> <20020130073449.B78919@gsmx07.alcatel.com.au> <791310002584.20020130150111@ur.ru> <20020131111153.Y72285@gsmx07.alcatel.com.au> <1427021336.20020201123650@ur.ru> <20020204130730.B72285@gsmx07.alcatel.com.au> <114283707399.20020204172833@ur.ru> <20020205083000.I72285@gsmx07.alcatel.com.au> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday, February 05, 2002 Peter Jeremy wrote: PJ> Looking at your dmesg, you're running RELENG_4_4 - I has incorrectly PJ> assumed you were running RELENG_4. The size of struct inode has PJ> changed (it shrank by 4 bytes), meaning it's now 256 bytes instead of PJ> 260 bytes (which requires 512 bytes from the allocator). That PJ> explains that discrepancy. This is corrected in PJ> src/sys/ufs/ufs/inode.h,v 1.28.2.2. PJ> I think RELENG_4_4 also explains your problem: There was a problem PJ> that vnodes were being cached too long and there was effectively no PJ> upper limit on their number. I gather that under some conditions PJ> (which I don't recall, but you seem to have hit) the vnode cache (and PJ> underlying inode cache) would eat all the KVM. There were a variety PJ> of commits by Matt Dillon between October and early November that PJ> fixed this. Have a search through the archives for references to PJ> "kern.maxvnodes". Thank you for the info! I upgraded to 4.5 today and I'll see if it helps. I indeed found some info in the archive that looks like a sign that my problem has been fixed - http://www.freebsd.org/cgi/getmsg.cgi?fetch=491439+494044+/usr/local/www/db/text/2002/freebsd-stable/20020120.freebsd-stable Hope it really helps. Regards, Sergey Gershtein To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 1:40:16 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mirapoint.inter.net.il (mirapoint.inter.net.il [192.114.186.20]) by hub.freebsd.org (Postfix) with ESMTP id A735A37B41B for ; Wed, 6 Feb 2002 01:40:12 -0800 (PST) Received: from pcsysadmin ([192.114.169.162]) by mirapoint.inter.net.il (Mirapoint) with SMTP id BEO17127; Wed, 6 Feb 2002 11:40:07 +0200 (IST) Message-ID: <000901c1aef2$eac2acf0$6601010a@pcsysadmin> From: "Rostislav" To: Subject: samba adding new user problem Date: Wed, 6 Feb 2002 11:44:46 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I installed samba 2.2.2 package from ftp.freebsd.org and it works now. I added some user by adduser(8) command and then tried to add this user into the samba by SWAT web interface from another computer. There was no error message in the web browser side but in the samba box I see this: Feb 6 11:10:20 landau /kernel: pid 264 (swat), uid 0: exited on signal 6 (core dumped) If I use smbpasswd -a it works fine. So it looks like SWAT only problem, any idea? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 3:17:32 2002 Delivered-To: freebsd-stable@freebsd.org Received: from guru.mired.org (dsl-64-192-6-133.telocity.com [64.192.6.133]) by hub.freebsd.org (Postfix) with SMTP id AE9DC37B400 for ; Wed, 6 Feb 2002 03:17:25 -0800 (PST) Received: (qmail 12814 invoked by uid 100); 6 Feb 2002 11:17:23 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15457.4290.604175.664032@guru.mired.org> Date: Wed, 6 Feb 2002 05:17:22 -0600 To: Nicolas Rachinsky Cc: Terry Lambert , stable@FreeBSD.ORG Subject: Re: Junior Annoying Hacker Task In-Reply-To: <20020206084515.GA1448@pc5.abc> References: <20020203040623.13CEF407B@i8k.babbleon.org> <5F46C986-16DB-11D6-8CEC-00039359034A@mac.com> <20020202110330.C16801@freebie.xs4all.nl> <3C5BCA46.713B1950@mindspring.com> <20020202145852.6781C407B@i8k.babbleon.org> <3C5CA666.9BC2BC06@mindspring.com> <15452.50112.625066.914576@guru.mired.org> <20020206084515.GA1448@pc5.abc> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ From: "Mike Meyer" X-Delivery-Agent: TMDA/0.44 (Python 2.2; freebsd-4.5-STABLE-i386) Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Nicolas Rachinsky types: > * On Sat, Feb 02, 2002 at 10:59:44PM -0600, > * Mike Meyer wrote: > > to frequently. Compare this to unix, where all you need is the kernel, > > init, sh and ed - and sufficiently clever people may be able to do it > > without init. > Just being interessted, how are you able to start sh without having > init? I tried "set init_path=/bin/sh" in the loader but that didn't > work. I said "may" because I'm not sure it's possible. > Another question, / is mounted read-only, how to remount it read-write > without having mount? Good point. I overlooked needing to remount root. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 3:40:31 2002 Delivered-To: freebsd-stable@freebsd.org Received: from apollo.backplane.com (apollo.backplane.com [216.240.41.2]) by hub.freebsd.org (Postfix) with ESMTP id 7FF1B37B41B for ; Wed, 6 Feb 2002 03:40:23 -0800 (PST) Received: (from dillon@localhost) by apollo.backplane.com (8.11.6/8.9.1) id g16Bdp498095; Wed, 6 Feb 2002 03:39:51 -0800 (PST) (envelope-from dillon) Date: Wed, 6 Feb 2002 03:39:51 -0800 (PST) From: Matthew Dillon Message-Id: <200202061139.g16Bdp498095@apollo.backplane.com> To: Mike Silbersack Cc: "David W. Chapman Jr." , stable@FreeBSD.ORG Subject: Re: cvs commit: src/sys/ufs/ffs ffs_softdep.c References: <20020206015011.Y4693-100000@patrocles.silby.com> Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG :> I just booted a -stable with :> :> $FreeBSD: src/sys/ufs/ffs/ffs_softdep.c,v 1.57.2.11 2002/02/05 18:46:53 dill :> :> and did not notice this problem. :> :> -- :> David W. Chapman Jr. : :I haven't seen it on subsequent reboots. I just thought Matt might want :to know, as it is a rare error message. (For me at least.) : :Mike "Silby" Silbersack It seems unrelated to me but, obviously, keep an eye out. I don't know if it's possible to ctl-alt-esc into the debugger that late in the game and get a kernel core but if it occurs again that is what one should try to do, or otherwise try to get something that is reproducable. -Matt Matthew Dillon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 4:53:32 2002 Delivered-To: freebsd-stable@freebsd.org Received: from businessconnect.businessconnect.nl (www.bconnect.nl [194.109.100.125]) by hub.freebsd.org (Postfix) with ESMTP id 7938837B495 for ; Wed, 6 Feb 2002 04:53:19 -0800 (PST) Received: from [195.38.249.132] by businessconnect.businessconnect.nl (Post.Office MTA v3.5 release 215 ID# 0-53760U1000L100S0V35) with SMTP id nl for ; Wed, 6 Feb 2002 13:46:14 +0000 From: Kempen Jobs BV To: stable@FreeBSD.org Subject: De Banenladder X-Mailer: TOS 6.0 SMTP SERVER Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Wed, 6 Feb 2002 13:46:14 +0000 Message-ID: <20020206134614000.DLM312@businessconnect.businessconnect.nl@[195.38.249.132]> Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Op zoek naar een baan, opleiding, personeel of informatie over een bedrijf? Kijk dan op www.banenladder.nl De Banenladder To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 5: 2:14 2002 Delivered-To: freebsd-stable@freebsd.org Received: from shiva.jussieu.fr (shiva.jussieu.fr [134.157.0.129]) by hub.freebsd.org (Postfix) with ESMTP id 8AADD37B420; Wed, 6 Feb 2002 05:02:03 -0800 (PST) Received: from heho.snv.jussieu.fr (heho.snv.jussieu.fr [134.157.37.22]) by shiva.jussieu.fr (8.12.1/jtpda-5.4) with ESMTP id g16D22YD035579 ; Wed, 6 Feb 2002 14:02:02 +0100 (CET) Received: from (arno@localhost) by heho.snv.jussieu.fr (8.11.6/jtpda-5.2) id g16D22D13459 ; Wed, 6 Feb 2002 14:02:02 +0100 (MET) To: freebsd-stable@freebsd.org Cc: freebsd-scsi@freebsd.org Subject: Problem reading (and writing ...) Rewriteable CDs From: arno@heho.snv.jussieu.fr Date: 06 Feb 2002 14:02:02 +0100 Message-ID: Lines: 83 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.1 MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, ehmm, am I the only one who sees this problem (since end November): I cannot mount, let alone burn, rewriteable CDs on -stable boxes (two) with adaptec SCSI-controller (one 1542, the other 2940) and SCSI-2 cd-writers. Recordable CDs read and write without any problem, changes settings in the Adaptec BIOS do not seem to make any difference. step 1, put (Windows created) CDRW in cd-writer: su-2.05a# mount_cd9660 -v /dev/cd1c /cdrom could not determine starting sector, using very first session mount_cd9660: /dev/cd1c: Device not configured step 2, put very same CDRW in cd-reader on very same machine: su-2.05a# mount_cd9660 -v /dev/cd0c /cdrom using starting sector 0 su-2.05a# ls /cdrom cd su-2.05a# step 3, put a CDR in cdwriter: su-2.05a# mount_cd9660 -v /dev/cd1c /cdw=20=20 using starting sector 0 su-2.05a# ls -l /cdw total 1 -r-xr-xr-x 1 root wheel 3728 May 1 1997 readme.txt If this helps, this is the output when trying to blank a CDRW: su-2.05a# cdrecord -v dev=3D6,0 speed=3D1 blank=3Dfast Cdrecord 1.10 (i386-unknown-freebsd4.5) Copyright (C) 1995-2001 J=F6rg Sc= hilling TOC Type: 1 =3D CD-ROM scsidev: '6,0' scsibus: 0 target: 6 lun: 0 Using libscg version 'schily-0.5' atapi: 0 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : RELADR SYNC LINKED=20 Vendor_info : 'TEAC ' Identifikation : 'CD-R55S ' Revision : '1.0F' Device seems to be: Teac CD-R50S. Using driver for Teac CD-R50S, Teac CD-R55S, JVC XR-W2010, Pinnacle RCD-5= 020 (teac_cdr50). Driver flags : SWABAUDIO cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable er= ror CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00 00 00 = 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk 0 (not valid)=20 cmd finished after 0.005s timeout 40s cdrecord: No disk / Wrong disk! The other machine wich exhibits this behaviour, has a YAMAHA CRW4416S 1.0f = cdwriter (and both of them work correctly for CDRWs until end November). Any help, suggestions are appreciated. One of the machines is a production = box, but the other is halted almost every evening and I can easily test a patched ke= rnel. Thanx in advance, Arno Klaassen --=20 Arno J. Klaassen SCITO S.A. Le Grand Sablon 4, avenue de l'Obiou 38700 La Tronche arno@ccr.jussieu.fr To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 5:21:51 2002 Delivered-To: freebsd-stable@freebsd.org Received: from vega.dhis.co.it.pt (a213-22-99-40.netcabo.pt [213.22.99.40]) by hub.freebsd.org (Postfix) with ESMTP id 4444137B43C; Wed, 6 Feb 2002 05:21:30 -0800 (PST) Received: (from nsubtil@localhost) by vega.dhis.co.it.pt (8.11.3/8.11.3) id g16DLQ913739; Wed, 6 Feb 2002 13:21:26 GMT (envelope-from nsubtil) Date: Wed, 6 Feb 2002 13:21:26 +0000 From: Nuno Subtil To: Jonathan Hanna Cc: freebsd-stable@freebsd.org, freebsd-hackers@freebsd.org Subject: Re: Whats with this -> sendto: No buffer space available Message-ID: <20020206132126.A13595@vega.dhis.co.it.pt> References: <200112071631.fB7GVgr36045@h24-79-126-98.vc.shawcable.net> <200202060350.g163oFG43139@207-194-143-195.dsl.axion.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200202060350.g163oFG43139@207-194-143-195.dsl.axion.net>; from jhanna@shaw.ca on Tue, Feb 05, 2002 at 07:50:14PM -0800 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Feb 05, 2002 at 07:50:14PM -0800, Jonathan Hanna wrote: > > On 07-Dec-01 Jonathan Hanna wrote: > > > > Latest data point here: this time it was fixed mysteriously. > > After noticing it was down, "netstat -m" showed no serious mbuf > > use or peak use. "ep0" had: > > ep0: flags=cc43 mtu 1500 > > and the IP address was set up correctly > > > > "tcpdump -n -i ep0" worked, and after that the behavior was back to normal. > > No restart of natd was done, no firewall rules flushed or reset. > > This is on 4.3-STABLE FreeBSD 4.3-STABLE #3: Sun Jul 15 00:27:41 PDT 2001 I have also seen these symptoms, but on an ISDN interface. The machine does NAT, and sometimes it just stops working. I can ssh into it through the "internal" NIC (an ISA NE2000 clone), but no traffic ever goes out through the ISDN interface --- any program that generates traffic through that interface returns the same error: "No buffer space available". netstat -m also shows nothing apparently wrong with mbuf usage. This happens about once or twice every two months or so, and a reboot fixes it. I can't recall seeing any special flags on the interface when this happens, nor do I remember trying to run tcpdump on the interface, but I can try that if it happens again. The ISDN card is a mysterious "combo" card which apparently does video-capture as well. The ISDN part works with the Teles S0/16.3 driver, modified to accept the card's signature. NAT is done through ipnat, and the ppp connection is managed by the userland ppp daemon. It runs 4.3-STABLE from around the beginning of May 2001. Nuno Subtil nsubtil@vega.dhis.co.it.pt To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 7:47:52 2002 Delivered-To: freebsd-stable@freebsd.org Received: from shiva.jussieu.fr (shiva.jussieu.fr [134.157.0.129]) by hub.freebsd.org (Postfix) with ESMTP id C708C37B421; Wed, 6 Feb 2002 07:47:31 -0800 (PST) Received: from heho.snv.jussieu.fr (heho.snv.jussieu.fr [134.157.37.22]) by shiva.jussieu.fr (8.12.1/jtpda-5.4) with ESMTP id g16FlUYD083366 ; Wed, 6 Feb 2002 16:47:30 +0100 (CET) Received: from (arno@localhost) by heho.snv.jussieu.fr (8.11.6/jtpda-5.2) id g16FlUJ14037 ; Wed, 6 Feb 2002 16:47:30 +0100 (MET) To: freebsd-stable@FreeBSD.ORG Cc: freebsd-scsi@FreeBSD.ORG Subject: Re: Problem reading (and writing ...) Rewriteable CDs References: From: arno@heho.snv.jussieu.fr Date: 06 Feb 2002 16:47:29 +0100 In-Reply-To: Message-ID: Lines: 6 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.1 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG sorry, I forgot: supplementary info: a *virgin* CDRW can perfectly well being burned. Arno To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 8:39:34 2002 Delivered-To: freebsd-stable@freebsd.org Received: from patrocles.silby.com (d53.as12.nwbl0.wi.voyager.net [169.207.135.53]) by hub.freebsd.org (Postfix) with ESMTP id 5A7E637B779 for ; Wed, 6 Feb 2002 08:15:19 -0800 (PST) Received: from localhost (silby@localhost) by patrocles.silby.com (8.11.6/8.11.6) with ESMTP id g16AHYG06563; Wed, 6 Feb 2002 10:17:35 GMT (envelope-from silby@silby.com) X-Authentication-Warning: patrocles.silby.com: silby owned process doing -bs Date: Wed, 6 Feb 2002 10:17:34 +0000 (GMT) From: Mike Silbersack To: Matthew Dillon Cc: "David W. Chapman Jr." , Subject: Re: cvs commit: src/sys/ufs/ffs ffs_softdep.c In-Reply-To: <200202061139.g16Bdp498095@apollo.backplane.com> Message-ID: <20020206101633.F6531-100000@patrocles.silby.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, 6 Feb 2002, Matthew Dillon wrote: > :I haven't seen it on subsequent reboots. I just thought Matt might want > :to know, as it is a rare error message. (For me at least.) > : > :Mike "Silby" Silbersack > > It seems unrelated to me but, obviously, keep an eye out. I don't know > if it's possible to ctl-alt-esc into the debugger that late in the > game and get a kernel core but if it occurs again that is what one > should try to do, or otherwise try to get something that is reproducable. > > -Matt > Matthew Dillon > It auto-rebooted a few seconds after the message, so I didn't get a chance to run over and hit anything. If it occurs again, I'll try to find it. Mike "Silby" Silbersack To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 10:16:12 2002 Delivered-To: freebsd-stable@freebsd.org Received: from melchior.cuivre.fr.eu.org (melchior.enst.fr [137.194.161.6]) by hub.freebsd.org (Postfix) with ESMTP id 603B337B416 for ; Wed, 6 Feb 2002 10:16:02 -0800 (PST) Received: from melusine.cuivre.fr.eu.org (melusine.enst.fr [137.194.160.34]) by melchior.cuivre.fr.eu.org (Postfix) with ESMTP id 9739183F6 for ; Wed, 6 Feb 2002 19:15:56 +0100 (CET) Received: by melusine.cuivre.fr.eu.org (Postfix, from userid 1000) id 4A48F2C3D1; Wed, 6 Feb 2002 19:15:56 +0100 (CET) Date: Wed, 6 Feb 2002 19:15:56 +0100 From: Thomas Quinot To: stable@freebsd.org Subject: Re: conf/31358: Need to load NFS client LKM [MFC] Message-ID: <20020206191556.A50292@melusine.cuivre.fr.eu.org> Reply-To: thomas@cuivre.fr.eu.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Folks, Some time ago I submitted a PR on situations where the nfsclient module needs to be loaded from /etc/rc.network (conf/31358). The proposed patch has been committed to current; I have prepared a patch for a possible MFC into 4-STABLE; tests and reviews on the code below would be most welcome. Thanks for any feedback, Thomas. Index: rc =================================================================== RCS file: /home/ncvs/src/etc/rc,v retrieving revision 1.212.2.38 diff -u -r1.212.2.38 rc --- rc 19 Dec 2001 17:52:17 -0000 1.212.2.38 +++ rc 31 Jan 2002 21:30:35 -0000 @@ -98,6 +98,7 @@ } chkdepend amd amd_enable portmap portmap_enable +chkdepend amd amd_enable NFS nfs_client_enable chkdepend NFS nfs_server_enable portmap portmap_enable chkdepend NIS nis_server_enable portmap portmap_enable chkdepend NIS nis_client_enable portmap portmap_enable Index: rc.network =================================================================== RCS file: /home/ncvs/src/etc/rc.network,v retrieving revision 1.74.2.28 diff -u -r1.74.2.28 rc.network --- rc.network 19 Dec 2001 17:52:17 -0000 1.74.2.28 +++ rc.network 31 Jan 2002 21:30:36 -0000 @@ -695,11 +695,39 @@ case ${nfs_client_enable} in [Yy][Ee][Ss]) - echo -n ' nfsiod'; nfsiod ${nfs_client_flags} - if [ -n "${nfs_access_cache}" ]; then - echo -n " NFS access cache time=${nfs_access_cache}" - sysctl vfs.nfs.access_cache_timeout=${nfs_access_cache} \ - >/dev/null + nfsclient_in_kernel=0 + # Handle absent nfs client support + if sysctl vfs.nfs >/dev/null 2>&1; then + nfsclient_in_kernel=1 + else + kldload nfsclient && nfsclient_in_kernel=1 + fi + if [ ${nfsclient_in_kernel} -eq 1 ] + then + echo -n ' nfsiod'; nfsiod ${nfs_client_flags} + if [ -n "${nfs_access_cache}" ]; then + echo -n " NFS access cache time=${nfs_access_cache}" + sysctl vfs.nfs.access_cache_timeout=${nfs_access_cache} >/dev/null + fi + + case ${amd_enable} in + [Yy][Ee][Ss]) + echo -n ' amd' + case ${amd_map_program} in + [Nn][Oo] | '') + ;; + *) + amd_flags="${amd_flags} `eval ${amd_map_program}`" + ;; + esac + + if [ -n "${amd_flags}" ]; then + amd -p ${amd_flags} > /var/run/amd.pid 2> /dev/null + else + amd 2> /dev/null + fi + ;; + esac fi ;; esac @@ -710,25 +738,6 @@ if [ -f /var/db/mounttab ]; then rpc.umntall -k fi - - case ${amd_enable} in - [Yy][Ee][Ss]) - echo -n ' amd' - case ${amd_map_program} in - [Nn][Oo] | '') - ;; - *) - amd_flags="${amd_flags} `eval ${amd_map_program}`" - ;; - esac - - if [ -n "${amd_flags}" ]; then - amd -p ${amd_flags} > /var/run/amd.pid 2> /dev/null - else - amd 2> /dev/null - fi - ;; - esac case ${rwhod_enable} in [Yy][Ee][Ss]) -- Thomas.Quinot@Cuivre.FR.EU.ORG To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 10:19:59 2002 Delivered-To: freebsd-stable@freebsd.org Received: from fbi.gov (plovdivppp186.internet-bg.net [213.137.32.186]) by hub.freebsd.org (Postfix) with ESMTP id D34FE37B405 for ; Wed, 6 Feb 2002 10:19:41 -0800 (PST) Received: (from petko@localhost) by fbi.gov (8.11.6/8.11.4) id g16IJfQ00582 for freebsd-stable@freebsd.org; Wed, 6 Feb 2002 20:19:41 +0200 (EET) (envelope-from petko) Date: Wed, 6 Feb 2002 20:19:41 +0200 From: Petko Popadiyski To: freebsd-stable@freebsd.org Subject: kbedic Message-ID: <20020206181941.GA571@fbi.gov> Reply-To: petko@freebsd-bg.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="UlVJffcvxoiEqYs2" Content-Disposition: inline User-Agent: Mutt/1.3.27i Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --UlVJffcvxoiEqYs2 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable veche kbedic - angliiskobulgarskiq i bulgaroangliiski rechnik e v ports col= lection blagodarenie na angel todorov ( takeover) Checkout ports/textproc/kbedic/Makefile Checkout ports/textproc/kbedic/distinfo Checkout ports/textproc/kbedic/pkg-comment Checkout ports/textproc/kbedic/pkg-descr Checkout ports/textproc/kbedic/pkg-plist --=20 Best wishes, Petko Popadiyski ICQ: 59468934 --UlVJffcvxoiEqYs2 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8YXO9JeZoJ/z3pAwRAlrOAJ9eFCMCt/SGz/CPAf794bX7qUytdgCfZ3UX v6Lv49vR7FVuYb2yO8uE0Tc= =BZTN -----END PGP SIGNATURE----- --UlVJffcvxoiEqYs2-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 10:47:51 2002 Delivered-To: freebsd-stable@freebsd.org Received: from smtp1.sentex.ca (smtp1.sentex.ca [199.212.134.4]) by hub.freebsd.org (Postfix) with ESMTP id 6E4C937B422 for ; Wed, 6 Feb 2002 10:47:48 -0800 (PST) Received: from simoeon.sentex.net (pyroxene.sentex.ca [199.212.134.18]) by smtp1.sentex.ca (8.11.6/8.11.6) with ESMTP id g16Illv61841 for ; Wed, 6 Feb 2002 13:47:47 -0500 (EST) (envelope-from mike@sentex.net) Message-Id: <5.1.0.14.0.20020206132137.035ae340@marble.sentex.ca> X-Sender: mdtpop@marble.sentex.ca X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Wed, 06 Feb 2002 13:41:58 -0500 To: stable@freebsd.org From: Mike Tancsa Subject: pam_radius vs pam_radius on STABLE Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Here is a strange one I am pulling my hair out over. I have one STABLE box that I use pam_radius to authenticate ssh and ftp. It works great. I am trying to setup the same on another box, that I just installed, but the radius does not seem to pass the password correctly. I have identical /etc/radius.conf /etc/pam.conf on both machines. and the shared secret on the radius client and server are correct. But instead of the cleartext passwd being sent to the radius server I see gibberish sent. Any ideas as to what it might be ? ---Mike -------------------------------------------------------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet since 1994 www.sentex.net Cambridge, Ontario Canada www.sentex.net/mike To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 11:24: 6 2002 Delivered-To: freebsd-stable@freebsd.org Received: from dastardly.newsbastards.org.72.27.172.IN-addr.ARPA.NetScum.dyndns.dk (dclient217-162-168-252.hispeed.ch [217.162.168.252]) by hub.freebsd.org (Postfix) with ESMTP id DE11137B425 for ; Wed, 6 Feb 2002 11:23:58 -0800 (PST) Received: from beerswilling.netscum.dyndns.dk (dcf77-zeit.netscum.dyndns.dk [172.27.72.27] (may be forged)) by dastardly.newsbastards.org.72.27.172.IN-addr.ARPA.NetScum.dyndns.dk (8.11.6/8.11.6) with ESMTP id g16J8Sb00712 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified FAIL) for ; Wed, 6 Feb 2002 20:08:32 +0100 (CET) (envelope-from bounce@dcf77-zeit.netscum.dyndns.dk) Received: (from root@localhost) by beerswilling.netscum.dyndns.dk (8.11.6/8.11.6) id g16J8SO00711; Wed, 6 Feb 2002 20:08:28 +0100 (CET) (envelope-from bounce@dcf77-zeit.netscum.dyndns.dk) Date: Wed, 6 Feb 2002 20:08:28 +0100 (CET) Message-Id: <200202061908.g16J8SO00711@beerswilling.netscum.dyndns.dk> From: BOUWSMA Beery To: freebsd-stable@freebsd.org Subject: Re: Weird wedge with ep0 ethernet and dhclient Organization: Men not wearing any pants that dont shave X-Hacked: via telnet to your port 25, what else? X-Internet-Access-Provided-By: Mountain Informatik AG, Zuerich X-NetScum: Yes X-One-And-Only-Real-True-Fluffy: No Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Howdy! I wrote on %.3s, %lld Sep 1993 > > I've been semi-consistently having my machine freeze up in a weird > > way when attempting to run /sbin/dhclient when the Cabal Modem is > > connected to an ep0 3Com 3C509 card. > [...] > up with anything more useful and concrete. And I'll also see how a > Different OS handles this card with the ISC dhclient. more l8r d00dz This will probably be the last I say about this stupid card. However: It seems that I can't get into the debugger when the machine freezes at multi-user startup no matter what I do. It also seems that even when FreeBSD wedges, I can boot into NetBSD, which somehow appears to initialize the card so that it can run the dhclient program without problems. After that, I can usually reboot into FreeBSD and it Just Works. Usually, but not always. Usually after I've used the card successfully with FreeBSD, I can power-down the machine and later boot without problems. Except once when the power cord proper was disconnected for some time. Both FreeBSD-stable and FreeBSD-current suffer this problem at boot. I think I couldn't get dhclient to work after boot with -current, but I could be remembering wrong. I dunno if it's Useful Information that NetBSD boots and runs dhclient with the 3C509 card immediately after FreeBSD wedges and that following that, FreeBSD works, for a while, usually. Unfortunately, since normally syslogd starts after dhclient, none of the info messages get logged, and it's not immediately obvious where it freezes, *if* I wanted to put more work into this rather than just tossing the 3C509 out the window and using a different card. That's enough about that. barry bouwsma To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 11:37:34 2002 Delivered-To: freebsd-stable@freebsd.org Received: from smtp1.sentex.ca (smtp1.sentex.ca [199.212.134.4]) by hub.freebsd.org (Postfix) with ESMTP id 921BD37B41B for ; Wed, 6 Feb 2002 11:37:28 -0800 (PST) Received: from simoeon.sentex.net (pyroxene.sentex.ca [199.212.134.18]) by smtp1.sentex.ca (8.11.6/8.11.6) with ESMTP id g16JbRj74467 for ; Wed, 6 Feb 2002 14:37:27 -0500 (EST) (envelope-from mike@sentex.net) Message-Id: <5.1.0.14.0.20020206143115.03da9b80@marble.sentex.ca> X-Sender: mdtpop@marble.sentex.ca X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Wed, 06 Feb 2002 14:31:38 -0500 To: stable@FreeBSD.ORG From: Mike Tancsa Subject: Re: pam_radius vs pam_radius on STABLE In-Reply-To: <5.1.0.14.0.20020206132137.035ae340@marble.sentex.ca> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Nevermind....I think the shared secret was too long. ---Mike At 01:41 PM 2/6/02 -0500, Mike Tancsa wrote: >Here is a strange one I am pulling my hair out over. I have one STABLE >box that I use pam_radius to authenticate ssh and ftp. It works great. I >am trying to setup the same on another box, that I just installed, but the >radius does not seem to pass the password correctly. I have identical > >/etc/radius.conf >/etc/pam.conf > >on both machines. > >and the shared secret on the radius client and server are correct. > >But instead of the cleartext passwd being sent to the radius server I see >gibberish sent. > > >Any ideas as to what it might be ? > > ---Mike >-------------------------------------------------------------------- >Mike Tancsa, tel +1 519 651 3400 >Sentex Communications, mike@sentex.net >Providing Internet since 1994 www.sentex.net >Cambridge, Ontario Canada www.sentex.net/mike > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 11:58:10 2002 Delivered-To: freebsd-stable@freebsd.org Received: from freebie.xs4all.nl (freebie.xs4all.nl [213.84.32.253]) by hub.freebsd.org (Postfix) with ESMTP id D048C37B420 for ; Wed, 6 Feb 2002 11:58:05 -0800 (PST) Received: (from wkb@localhost) by freebie.xs4all.nl (8.11.6/8.11.6) id g16JvjO12029; Wed, 6 Feb 2002 20:57:45 +0100 (CET) (envelope-from wkb) Date: Wed, 6 Feb 2002 20:57:45 +0100 From: Wilko Bulte To: Nevermind Cc: JJ Behrens , Rossam Souza Silva , freebsd-stable@FreeBSD.ORG Subject: Re: KDE mixup: was samba package Message-ID: <20020206205745.E11849@freebie.xs4all.nl> References: <20020204122425.A27402@alicia.nttmcl.com> <20020205123552.A634@alicia.nttmcl.com> <20020206090420.GB61267@nevermind.kiev.ua> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020206090420.GB61267@nevermind.kiev.ua>; from never@nevermind.kiev.ua on Wed, Feb 06, 2002 at 11:04:20AM +0200 X-OS: FreeBSD 4.5-STABLE X-PGP: finger wilko@freebsd.org Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Feb 06, 2002 at 11:04:20AM +0200, Nevermind wrote: > Hello, JJ Behrens! > > On Tue, Feb 05, 2002 at 12:35:52PM -0800, you wrote: > > > > Sure. Why the kde meta-package was left out?? > > > > There was an unfortunate accident. The FreeBSD KDE team was attempting to > > reduce the amount of KDE material on the first CD, and (accidentally) the > > material didn't make it onto any of the CD's. > Maybe we should do better checking of -RELEASE for this? I see the > strange things doing since 4.1, we are getting closer and closer to > those linux kIdZ, who does not care how thier code works, wether their > gcc 3.x.x will work with all stuff and produce a good code, and so on. So, I take it you will volunteer to check the 6000+ ports & packages? -- | / o / /_ _ wilko@FreeBSD.org |/|/ / / /( (_) Bulte Arnhem, the Netherlands To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 12: 5:41 2002 Delivered-To: freebsd-stable@freebsd.org Received: from vega.dhis.co.it.pt (a213-22-99-40.netcabo.pt [213.22.99.40]) by hub.freebsd.org (Postfix) with ESMTP id 7467A37B41D; Wed, 6 Feb 2002 12:05:26 -0800 (PST) Received: (from nsubtil@localhost) by vega.dhis.co.it.pt (8.11.3/8.11.3) id g16K5Ob15233; Wed, 6 Feb 2002 20:05:24 GMT (envelope-from nsubtil) Date: Wed, 6 Feb 2002 20:05:24 +0000 From: Nuno Subtil To: freebsd-hackers@freebsd.org, freebsd-stable@freebsd.org Subject: Re: Whats with this -> sendto: No buffer space available Message-ID: <20020206200524.A14992@vega.dhis.co.it.pt> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Karl Dietz asked for this to be forwarded to the lists, so here it is. ----- Forwarded message from Karl Dietz ----- From: "Karl Dietz" Date: Wed, 6 Feb 2002 19:02:51 +0100 To: "Jonathan Hanna" , Subject: Re: Whats with this -> sendto: No buffer space available X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4807.1700 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300 Meanwhile I have browsed through the code of ep and vx. > 3) in ep_intr: > > rescan: > > while ((status = inw(BASE + EP_STATUS)) & S_5_INTS) { > > /* first acknowledge all interrupt sources */ > outw(BASE + EP_COMMAND, ACK_INTR | (status & S_MASK)); > > if (status & (S_RX_COMPLETE | S_RX_EARLY)) { > old_status = status; > epread(sc); > continue; > } > > It seems that if an RX is done then any TX conditions are lost as an ack of all > sources has been done. I have verified that on the next look after the epread > TX conditions have disappeared without being handled. If OACTIVE is set, the vx driver (which is to be folded back into ep) has a more verbose comment on the code in question: /* * Acknowledge any interrupts. It's important that we do this * first, since there would otherwise be a race condition. * Due to the i386 interrupt queueing, we may get spurious * interrupts occasionally. */ But the handler is written in a way that tx interupts get lost only if a card failure occurs. Anyway the modified driver has transfered more than 4 million packets already without a problem (two interfaces, some flood pings, and the whole internet traffic) Regards, Karl PS: Can one of you forward this to the list? ----- End forwarded message ----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 12:49:52 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mail.qcislands.net (mail.qcislands.net [209.53.238.6]) by hub.freebsd.org (Postfix) with ESMTP id 294A037B41F for ; Wed, 6 Feb 2002 12:49:38 -0800 (PST) Received: from [209.53.238.2] (helo=auth.qcislands.net) by mail.qcislands.net with esmtp (Exim 3.31 #2) id 16YZ0K-0002We-00 for freebsd-stable@freebsd.org; Wed, 06 Feb 2002 12:49:20 -0800 Received: from ccstore by auth.qcislands.net with local-rmail (Exim 3.22 #1) id 16YZ0L-0005b5-00 for freebsd-stable@freebsd.org; Wed, 06 Feb 2002 12:49:21 -0800 Received: from fstable by dick.ccstores.com with local (Exim 3.34 #1) id 16YYyH-0001iZ-00 for freebsd-stable@freebsd.org; Wed, 06 Feb 2002 12:47:13 -0800 From: fstable@ccstores.com (FreeBSD stable) To: freebsd-stable@freebsd.org Subject: re:Official ISOs X-Mailer: SCO Shell Date: Wed, 6 Feb 2002 12:47:12 -0800 (PST) Message-Id: Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >Subject: Official ISOs >Date: Wed, 6 Feb 2002 10:41:53 +0200 >From: "Rostislav" >To: >Hello there. >It's already known fact that some packages (samba for example) are = >missing in official ISOs. So, is there any plans to reproduce the ISOs = >or maybe release new 4.5.1 RELEASE version, like 4.1.1 some time before? >Thanks. cistron-radius disappeared from the packages as well, altho it *is* present in ports. was this by design or error? -- FreeBSD stable directly mailto:paz@qcislands.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 13:29:45 2002 Delivered-To: freebsd-stable@freebsd.org Received: from resnet.uoregon.edu (resnet.uoregon.edu [128.223.122.47]) by hub.freebsd.org (Postfix) with ESMTP id 782C437B404 for ; Wed, 6 Feb 2002 13:29:42 -0800 (PST) Received: from localhost (dwhite@localhost) by resnet.uoregon.edu (8.11.3/8.10.1) with ESMTP id g16LU6475830; Wed, 6 Feb 2002 13:30:07 -0800 (PST) Date: Wed, 6 Feb 2002 13:30:06 -0800 (PST) From: Doug White To: William E Reid Cc: "freebsd-stable@FreeBSD.ORG" Subject: Re: Linux compat mount and others In-Reply-To: <3C602C3B.130B40AF@cstone.net> Message-ID: <20020206132906.L73049-100000@resnet.uoregon.edu> X-All-Your-Base: are belong to us MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 5 Feb 2002, William E Reid wrote: > If you have Linux Netscape. View file:///mnt/ and you will get > /usr/compat/linux/mnt. This is the same with acroread or any other > linux labeled binary (I guess). This is normal and correct behavior. The kernel will check /compat/linux/ before / for any requested file. > What is the difference in branding something Linux vs. SVR4? It flags which emulation layer to run the binary under. Doug White | FreeBSD: The Power to Serve dwhite@resnet.uoregon.edu | www.FreeBSD.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 14: 3:29 2002 Delivered-To: freebsd-stable@freebsd.org Received: from gw.nectar.cc (gw.nectar.cc [208.42.49.153]) by hub.freebsd.org (Postfix) with ESMTP id 9699037B426 for ; Wed, 6 Feb 2002 14:03:23 -0800 (PST) Received: from madman.nectar.cc (madman.nectar.cc [10.0.1.111]) by gw.nectar.cc (Postfix) with ESMTP id C8DC747; Wed, 6 Feb 2002 16:03:22 -0600 (CST) Received: (from nectar@localhost) by madman.nectar.cc (8.11.6/8.11.6) id g16M3MU80093; Wed, 6 Feb 2002 16:03:22 -0600 (CST) (envelope-from nectar) Date: Wed, 6 Feb 2002 16:03:22 -0600 From: "Jacques A. Vidrine" To: FreeBSD stable Cc: freebsd-stable@freebsd.org Subject: Re: Official ISOs Message-ID: <20020206220322.GB79998@madman.nectar.cc> Mail-Followup-To: "Jacques A. Vidrine" , FreeBSD stable , freebsd-stable@freebsd.org References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.27i X-Url: http://www.nectar.cc/ Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Feb 06, 2002 at 12:47:12PM -0800, FreeBSD stable wrote: > cistron-radius disappeared from the packages as well, altho it *is* > present in ports. > > was this by design or error? By design. Many RADIUS servers are affected by http://www.securityfocus.com/bid/3530 as well as another as-yet-undisclosed vulnerability. Cheers, -- Jacques A. Vidrine http://www.nectar.cc/ NTT/Verio SME . FreeBSD UNIX . Heimdal Kerberos jvidrine@verio.net . nectar@FreeBSD.org . nectar@kth.se To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 14:22:56 2002 Delivered-To: freebsd-stable@freebsd.org Received: from areilly.bpc-users.org (CPE-144-132-240-160.nsw.bigpond.net.au [144.132.240.160]) by hub.freebsd.org (Postfix) with SMTP id 563FD37B417 for ; Wed, 6 Feb 2002 14:22:42 -0800 (PST) Received: (qmail 12625 invoked by uid 1000); 6 Feb 2002 22:22:40 -0000 From: "Andrew Reilly" Date: Thu, 7 Feb 2002 09:22:40 +1100 To: Archie Cobbs Cc: freebsd-stable@FreeBSD.ORG, freebsd-net@FreeBSD.ORG Subject: Re: mpd-netgraph problem. Message-ID: <20020207092240.A12211@gurney.reilly.home> References: <200202022113.g12LDs771403@arch20m.dellroad.org> <200202060545.g165jtV12257@arch20m.dellroad.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <200202060545.g165jtV12257@arch20m.dellroad.org>; from archie@dellroad.org on Tue, Feb 05, 2002 at 09:45:55PM -0800 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Archie, I've another, probably unrelated problem that has surfaced with mpd-netgraph in the last couple of months. The work-around is simple, which is why it's taken me so long to get around to raising the issue. I start mpd-netgraph at boot time, to create a VPN link to my office, with a script /usr/local/etc/rc.d/mpd. That used to work fine, and I haven't changed my mpd configuration at all in the mean time. For the last couple of months, though, this has resulted in no ng0 node, and a log that looks like: Feb 5 21:41:46 gurney mpd: mpd: pid 240, version 3.6 (root@gurney.reilly.home 18:28 19-Jan-2002) Feb 5 21:41:46 gurney mpd: [vpn] can't create socket node: Exec format error Feb 5 21:41:46 gurney mpd: mpd: local IP address for PPTP is xxx.xxx.xxx.xxx Feb 5 21:41:46 gurney mpd: [vpn] using interface Feb 5 21:41:46 gurney mpd: [vpn] IFACE: Open event Feb 5 21:41:46 gurney mpd: [vpn] IPCP: Open event Feb 5 21:41:46 gurney mpd: [vpn] IPCP: state change Initial --> Starting Feb 5 21:41:46 gurney mpd: [vpn] IPCP: LayerStart Feb 5 21:41:46 gurney mpd: [vpn] bundle: OPEN event in state CLOSED Feb 5 21:41:46 gurney mpd: [vpn] opening link "vpn"... Feb 5 21:41:46 gurney mpd: [vpn] link: OPEN event Feb 5 21:41:46 gurney mpd: [vpn] LCP: Open event Feb 5 21:41:46 gurney mpd: [vpn] LCP: state change Initial --> Starting Feb 5 21:41:46 gurney mpd: [vpn] LCP: LayerStart Feb 5 21:41:46 gurney mpd: [vpn] device: OPEN event in state DOWN Feb 5 21:41:46 gurney mpd: pptp0: connecting to yyy.yyy.yyy.yyy:1723 Feb 5 21:41:46 gurney mpd: [vpn] device is now in state OPENING Feb 5 21:41:46 gurney mpd: pptp0: connected to yyy.yyy.yyy.yyy:1723 Feb 5 21:41:46 gurney mpd: pptp0: attached to connection with yyy.yyy.yyy.yyy:1723 Feb 5 21:41:46 gurney mpd: pptp0-0: outgoing call connected at 14808325 bps Feb 5 21:41:46 gurney mpd: [vpn] PPTP call successful Feb 5 21:41:46 gurney mpd: [vpn] can't attach pptpgre node: Bad file descriptor Feb 5 21:41:46 gurney mpd: pptp0-0: clearing call Feb 5 21:41:46 gurney mpd: [vpn] can't shutdown "bypass.link0": Bad file descriptor Feb 5 21:41:46 gurney mpd: [vpn] device: DOWN event in state OPENING Feb 5 21:41:46 gurney mpd: [vpn] device is now in state DOWN Feb 5 21:41:46 gurney mpd: [vpn] link: DOWN event Feb 5 21:41:46 gurney mpd: [vpn] LCP: Down event Feb 5 21:41:46 gurney mpd: [vpn] device: OPEN event in state DOWN Feb 5 21:41:46 gurney mpd: [vpn] pausing 9 seconds before open Feb 5 21:41:46 gurney mpd: [vpn] device is now in state DOWN Feb 5 21:41:46 gurney mpd: pptp0-0: peer call disconnected res=zero? err=none Feb 5 21:41:46 gurney mpd: pptp0-0: killing channel Feb 5 21:41:46 gurney mpd: pptp0: closing connection with yyy.yyy.yyy.yyy:1723 Feb 5 21:41:46 gurney mpd: pptp0: killing connection with yyy.yyy.yyy.yyy:1723 With the section from "device: OPEN event in state DOWN" repeating until I stop mpd. It seems to be a race or dependancy problem, because the "fix" is to just wait for a couple of seconds after stopping mpd, then start it again, and then it works fine. After doing the manual stop/start sequence, the kernel mutters something like: Jan 30 09:29:03 gurney /kernel: bpf: ng0 attached Hints? Suggestions? -- Andrew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 14:39:31 2002 Delivered-To: freebsd-stable@freebsd.org Received: from pt-quorum.com (pt-quorum.com [209.10.167.210]) by hub.freebsd.org (Postfix) with ESMTP id 046D337B422 for ; Wed, 6 Feb 2002 14:39:20 -0800 (PST) Received: from gw.tex.bogus (d179237.avr.PT.KPNQwest.net [193.126.179.237]) by pt-quorum.com (Postfix) with ESMTP id C841BED23 for ; Wed, 6 Feb 2002 22:44:18 +0000 (WET) Received: by gw.tex.bogus (Postfix, from userid 1000) id 8B1155D68; Wed, 6 Feb 2002 22:39:38 +0000 (WET) Date: Wed, 6 Feb 2002 22:39:38 +0000 From: Nuno Teixeira To: freebsd-stable@freebsd.org Subject: some discussion about flightgear on freebsd Message-ID: <20020206223938.GD42499@gw.tex.bogus> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.27i X-Operating-System: FreeBSD 4.5-STABLE Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello to all, Just to say that there has been some discussion about running flightgear simulator on freebsd in flightgear-users mailing list. Flightgear developers are about to make some changes on fg code to compile and run better on freebsd. For those who are interested please subscribe that list and help to port fg to freebsd. Bye, -- Nuno Teixeira pt-quorum.com /* PGP Public Key: http://www.pt-quorum.com/pgp/nunoteixeira.asc Key fingerprint: 8C2C B364 D4DC 0C92 56F5 CE6F 8F07 720A 63A0 4FC7 */ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 14:43: 4 2002 Delivered-To: freebsd-stable@freebsd.org Received: from pt-quorum.com (pt-quorum.com [209.10.167.210]) by hub.freebsd.org (Postfix) with ESMTP id 59D3F37B41D for ; Wed, 6 Feb 2002 14:42:56 -0800 (PST) Received: from gw.tex.bogus (d179237.avr.PT.KPNQwest.net [193.126.179.237]) by pt-quorum.com (Postfix) with ESMTP id 7693AED23 for ; Wed, 6 Feb 2002 22:47:54 +0000 (WET) Received: by gw.tex.bogus (Postfix, from userid 1000) id 8A04F5D68; Wed, 6 Feb 2002 22:43:10 +0000 (WET) Date: Wed, 6 Feb 2002 22:43:10 +0000 From: Nuno Teixeira To: freebsd-stable@freebsd.org Subject: Re: some discussion about flightgear on freebsd Message-ID: <20020206224310.GE42499@gw.tex.bogus> References: <20020206223938.GD42499@gw.tex.bogus> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020206223938.GD42499@gw.tex.bogus> User-Agent: Mutt/1.3.27i X-Operating-System: FreeBSD 4.5-STABLE Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I forget to include the list: http://seneca.me.umn.edu/pipermail/flightgear-users/2002-February/thread.html Bye, Nuno Teixeira On Wed, Feb 06, 2002 at 10:39:38PM +0000, Nuno Teixeira wrote: | | Hello to all, | | Just to say that there has been some discussion about running flightgear | simulator on freebsd in flightgear-users mailing list. | | Flightgear developers are about to make some changes on fg code to compile | and run better on freebsd. | | For those who are interested please subscribe that list and help to port fg | to freebsd. | | Bye, | | | -- | Nuno Teixeira | pt-quorum.com | | /* | PGP Public Key: | http://www.pt-quorum.com/pgp/nunoteixeira.asc | Key fingerprint: | 8C2C B364 D4DC 0C92 56F5 CE6F 8F07 720A 63A0 4FC7 | */ | | To Unsubscribe: send mail to majordomo@FreeBSD.org | with "unsubscribe freebsd-stable" in the body of the message -- Nuno Teixeira pt-quorum.com /* PGP Public Key: http://www.pt-quorum.com/pgp/nunoteixeira.asc Key fingerprint: 8C2C B364 D4DC 0C92 56F5 CE6F 8F07 720A 63A0 4FC7 */ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 16:18: 6 2002 Delivered-To: freebsd-stable@freebsd.org Received: from angui.sh (angui.sh [216.27.181.149]) by hub.freebsd.org (Postfix) with ESMTP id BD05437B420 for ; Wed, 6 Feb 2002 16:18:03 -0800 (PST) Received: from localhost (leareth@localhost) by angui.sh (8.11.6/8.11.4) with ESMTP id g170oQ356237 for ; Wed, 6 Feb 2002 16:50:26 -0800 (PST) (envelope-from leareth@angui.sh) Date: Wed, 6 Feb 2002 16:50:26 -0800 (PST) From: Matthew Hall To: stable@freebsd.org Subject: linux_base-6.1 vs 7.1? Message-ID: <20020206164739.P51254-100000@angui.sh> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I don't suppose someone can sum up the differences between the two? I have several game servers running that rely on the linux_base-6.1 I installed many moons ago, and was thinking of upgrading them. Are they more robust, more stable, etc etc? My googling is turning up surprisingly little information on the additions/features of each. I have several random game server crashes that I'm hoping will be fixed with 'improved' code. Thanks, -- It's always September somewhere on the 'net. | http://angui.sh Another proud member of Eep's killfile. | Unix Sys. Admin. unreal://angui.sh | leareth@angui.sh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 16:24:14 2002 Delivered-To: freebsd-stable@freebsd.org Received: from gull.prod.itd.earthlink.net (gull.mail.pas.earthlink.net [207.217.120.84]) by hub.freebsd.org (Postfix) with ESMTP id 338C337B405 for ; Wed, 6 Feb 2002 16:24:08 -0800 (PST) Received: from user-uiven4g.dsl.mindspring.com ([165.247.92.144] helo=celery) by gull.prod.itd.earthlink.net with smtp (Exim 3.33 #1) id 16YcMB-0001IB-00 for stable@freebsd.org; Wed, 06 Feb 2002 16:24:07 -0800 Message-ID: <000701c1af6d$c1386840$060aa8c0@celery> From: "Jeff Love" To: References: <20020206164739.P51254-100000@angui.sh> Subject: Re: linux_base-6.1 vs 7.1? Date: Wed, 6 Feb 2002 19:24:05 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG One main upgrade is glibc2.2.2. I was unable to get CSGuard to load in metamod (Half-Life Counter-Strike) due to needing at least glibc2.1.3, base_6.1 is only glibc2.1.2. Thus far my game servers seem at least as stable as under linux_base_6.1. Jeff Love Burgh-Com ----- Original Message ----- From: "Matthew Hall" To: Sent: Wednesday, February 06, 2002 7:50 PM Subject: linux_base-6.1 vs 7.1? > > I don't suppose someone can sum up the differences between > the two? I have several game servers running that rely on > the linux_base-6.1 I installed many moons ago, and was thinking > of upgrading them. Are they more robust, more stable, etc etc? > My googling is turning up surprisingly little information on > the additions/features of each. I have several random game > server crashes that I'm hoping will be fixed with 'improved' > code. > > Thanks, > > -- > It's always September somewhere on the 'net. | http://angui.sh > Another proud member of Eep's killfile. | Unix Sys. Admin. > unreal://angui.sh | leareth@angui.sh > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 16:26:48 2002 Delivered-To: freebsd-stable@freebsd.org Received: from leviathan.inethouston.net (leviathan.inethouston.net [66.64.12.249]) by hub.freebsd.org (Postfix) with ESMTP id 231DA37B416 for ; Wed, 6 Feb 2002 16:26:43 -0800 (PST) Received: by leviathan.inethouston.net (Postfix, from userid 1001) id DE69A319BE5; Wed, 6 Feb 2002 18:26:42 -0600 (CST) Date: Wed, 6 Feb 2002 18:26:42 -0600 From: "David W. Chapman Jr." To: Jeff Love Cc: stable@freebsd.org Subject: Re: linux_base-6.1 vs 7.1? Message-ID: <20020207002642.GA41002@leviathan.inethouston.net> Reply-To: "David W. Chapman Jr." Mail-Followup-To: Jeff Love , stable@freebsd.org References: <20020206164739.P51254-100000@angui.sh> <000701c1af6d$c1386840$060aa8c0@celery> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <000701c1af6d$c1386840$060aa8c0@celery> User-Agent: Mutt/1.3.27i X-Operating-System: FreeBSD 4.5-STABLE i386 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Feb 06, 2002 at 07:24:05PM -0500, Jeff Love wrote: > One main upgrade is glibc2.2.2. I was unable to get CSGuard to load in > metamod (Half-Life Counter-Strike) due to needing at least glibc2.1.3, > base_6.1 is only glibc2.1.2. Thus far my game servers seem at least as > stable as under linux_base_6.1. > Another is XFree86-4 v XFree86-3 (makes unreal play a lot faster in software render mode) -- David W. Chapman Jr. dwcjr@inethouston.net Raintree Network Services, Inc. dwcjr@freebsd.org FreeBSD Committer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 17:29: 2 2002 Delivered-To: freebsd-stable@freebsd.org Received: from pi.yip.org (pi.yip.org [199.45.111.121]) by hub.freebsd.org (Postfix) with ESMTP id C5B5E37B417 for ; Wed, 6 Feb 2002 17:28:52 -0800 (PST) Received: (from melange@localhost) by pi.yip.org (8.11.3/8.11.3) id g171SpM51128 for freebsd-stable@freebsd.org; Wed, 6 Feb 2002 20:28:51 -0500 (EST) (envelope-from melange@yip.org) Date: Wed, 6 Feb 2002 20:28:51 -0500 From: Bob K To: freebsd-stable@freebsd.org Subject: RELENG_4_3 question Message-ID: <20020206202850.N454@yip.org> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="mojUlQ0s9EVzWg2t" Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --mojUlQ0s9EVzWg2t Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Today I cvsupped from RELENG_4_3 p22 to p26 due to the security advisory regarding fstatfs (02:09). I was mildly surprised to see a good number of files & directories deleted from src/contrib/gcc and src/contrib/libstdc++. src/UPDATING shows this: 20020127: p26 sdiff temp file handling. 20020127: p25 gzip tempfile handling. 20020123: p24 FreeBSD-SA-02:08.exec.asc There's a small window in exec where one could debug a setuid program and obtain elevated priviledges. This was corrected. 20020123: p23 FreeBSD-SA-02:07.k5su k5su fixes. none of which seem related to it. Looking over cvsweb, I don't even see the files that were deleted when I change the view from RELENG_4_3 to RELENG_4_3_RELEASE - no attic or anything. I'm not particularly worried about the deleted files, since I'm just going to be rebuilding the kernel and a few programs - but I am curious as to whether this was stuff that was removed intentionally from the main tree, or if it was extra stuff that somehow ended up in my tree, say, by someone installing a trojan'ed gcc... (uh-oh) Attached is my cvsup log. Apologies if this should go to -questions instead; feel free to point me there if that's the case. -- Bob | There's more to life than e-mail, supposedly. --mojUlQ0s9EVzWg2t Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="cvsup.log" pi# cvsup -g 43rel-supfile Connected to cvsup17.FreeBSD.org Updating collection src-all/cvs Edit src/UPDATING Edit src/contrib/diff/sdiff.c Delete src/contrib/gcc/LITERATURE Delete src/contrib/gcc/c-dump.c Delete src/contrib/gcc/c-dump.h Delete src/contrib/gcc/config/alpha/config-nt.sed Delete src/contrib/gcc/config/alpha/t-osf Delete src/contrib/gcc/config/alpha/win-nt.h Delete src/contrib/gcc/config/alpha/x-osf Delete src/contrib/gcc/config/alpha/xm-winnt.h Delete src/contrib/gcc/config/i386/beos-pe.h Delete src/contrib/gcc/config/i386/chorus.h Delete src/contrib/gcc/config/i386/cygwin32.asm Delete src/contrib/gcc/config/i386/cygwin32.h Delete src/contrib/gcc/config/i386/go32-rtems.h Delete src/contrib/gcc/config/i386/netware.h Delete src/contrib/gcc/config/i386/sol2dbg.h Delete src/contrib/gcc/config/i386/t-cygwin32 Delete src/contrib/gcc/config/i386/t-go32 Delete src/contrib/gcc/config/i386/t-netware Delete src/contrib/gcc/config/i386/x-beos Delete src/contrib/gcc/config/i386/x-cygwin32 Delete src/contrib/gcc/config/i386/xm-beos.h Delete src/contrib/gcc/config/i386/xm-cygwin32.h Delete src/contrib/gcc/config/i386/xm-go32.h Delete src/contrib/gcc/config/libgcc-glibc.ver Delete src/contrib/gcc/config/mips/iris6gld.h Delete src/contrib/gcc/config/mips/mips-protos.h Delete src/contrib/gcc/config/mips/openbsd-be.h Delete src/contrib/gcc/config/mips/openbsd.h Delete src/contrib/gcc/config/mips/t-ultrix Delete src/contrib/gcc/config/mips/ultrix.h Delete src/contrib/gcc/config/mips/x-ultrix Delete src/contrib/gcc/config/mips/xm-netbsd.h Delete src/contrib/gcc/config/mips/xm-openbsd.h Delete src/contrib/gcc/config/netware.h Delete src/contrib/gcc/config/sparc/chorus.h Delete src/contrib/gcc/config/sparc/xm-netbsd.h Delete src/contrib/gcc/contrib.texi Delete src/contrib/gcc/cp/cfns.h Delete src/contrib/gcc/cp/g++FAQ.texi Delete src/contrib/gcc/cp/inc/cxxabi.h Delete src/contrib/gcc/cp/ir.texi Delete src/contrib/gcc/cp/vec.cc Delete src/contrib/gcc/cp-demangle.c Delete src/contrib/gcc/cpp.in Delete src/contrib/gcc/dce.c Delete src/contrib/gcc/f/ggc.j Delete src/contrib/gcc/f/install0.texi Delete src/contrib/gcc/fixinc.irix Delete src/contrib/gcc/fixinc.wrap Delete src/contrib/gcc/frame-dwarf2.c Delete src/contrib/gcc/gccbug.in Delete src/contrib/gcc/gthr-win32.h Delete src/contrib/gcc/hashtab.c Delete src/contrib/gcc/hashtab.h Delete src/contrib/gcc/lbasename.c Delete src/contrib/gcc/md5.c Delete src/contrib/gcc/md5.h Delete src/contrib/gcc/mkstemp.c Delete src/contrib/gcc/objc/README.threads Delete src/contrib/gcc/objc/THREADS Delete src/contrib/gcc/objc/THREADS.MACH Delete src/contrib/gcc/objc/libobjc.def Delete src/contrib/gcc/objc/libobjc_entry.c Delete src/contrib/gcc/objc/linking.m Delete src/contrib/gcc/objc/nil_method.c Delete src/contrib/gcc/objc/objc-list.h Delete src/contrib/gcc/objc/thr-dce.c Delete src/contrib/gcc/objc/thr-decosf1.c Delete src/contrib/gcc/objc/thr-irix.c Delete src/contrib/gcc/objc/thr-mach.c Delete src/contrib/gcc/objc/thr-os2.c Delete src/contrib/gcc/objc/thr-posix.c Delete src/contrib/gcc/objc/thr-pthreads.c Delete src/contrib/gcc/objc/thr-single.c Delete src/contrib/gcc/objc/thr-solaris.c Delete src/contrib/gcc/objc/thr-vxworks.c Delete src/contrib/gcc/objc/thr-win32.c Delete src/contrib/gcc/objc/thr.c Delete src/contrib/gcc/objc/thr.h Delete src/contrib/gcc/partition.c Delete src/contrib/gcc/partition.h Delete src/contrib/gcc/symcat.h Delete src/contrib/gcc/tradcif.c Delete src/contrib/gcc/vfprintf.c Delete src/contrib/libobjc/aclocal.m4 Delete src/contrib/libobjc/config.h.in Delete src/contrib/libobjc/thr-objc.c Delete src/contrib/libobjc/thr-rtems.c Delete src/contrib/libstdc++/ChangeLog-2000 Delete src/contrib/libstdc++/Makefile.am Delete src/contrib/libstdc++/README Delete src/contrib/libstdc++/acconfig.h Delete src/contrib/libstdc++/acinclude.m4 Delete src/contrib/libstdc++/aclocal.m4 Delete src/contrib/libstdc++/config/basic_file_libio.cc Delete src/contrib/libstdc++/config/basic_file_libio.h Delete src/contrib/libstdc++/config/basic_file_stdio.cc Delete src/contrib/libstdc++/config/basic_file_stdio.h Delete src/contrib/libstdc++/config/c_io_libio.h Delete src/contrib/libstdc++/config/c_io_libio_codecvt.c Delete src/contrib/libstdc++/config/c_io_stdio.h Delete src/contrib/libstdc++/config/c_locale_generic.cc Delete src/contrib/libstdc++/config/c_locale_generic.h Delete src/contrib/libstdc++/config/c_locale_gnu.cc Delete src/contrib/libstdc++/config/c_locale_gnu.h Delete src/contrib/libstdc++/config.h.in Delete src/contrib/libstdc++/configure Delete src/contrib/libstdc++/configure.host Delete src/contrib/libstdc++/configure.target Delete src/contrib/libstdc++/mkc++config Delete src/contrib/libstdc++/mkcheck.in Delete src/contrib/libstdc++/mkcshadow Delete src/contrib/libstdc++/mkinclosure Delete src/contrib/libstdc++/mknumeric_limits Delete src/contrib/libstdc++/porting.texi Delete src/contrib/libstdc++/testsuite/Makefile.am Delete src/contrib/libstdc++/testsuite/README Delete src/contrib/libstdc++/testsuite/lib/libstdc++-v3-dg.exp Delete src/contrib/libstdc++/testsuite/printnow.c Delete src/contrib/libstdc++/testsuite/testsuite_hooks.h Delete src/contrib/libstdc++/testsuite_flags.in Edit src/gnu/usr.bin/gzip/zdiff Edit src/gnu/usr.bin/gzip/znew Edit src/share/examples/cvsup/standard-supfile Edit src/sys/conf/newvers.sh --mojUlQ0s9EVzWg2t-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 17:31:18 2002 Delivered-To: freebsd-stable@freebsd.org Received: from vimfuego.saarinen.org (saarinen.org [203.79.82.14]) by hub.freebsd.org (Postfix) with ESMTP id 0DEE137B47E for ; Wed, 6 Feb 2002 17:31:12 -0800 (PST) Received: from [192.168.1.10] (helo=den2) by vimfuego.saarinen.org with esmtp (Exim 3.33 #1 (Red Hack)) id 16YdP5-0001e1-00 for ; Thu, 07 Feb 2002 14:31:11 +1300 Date: Thu, 7 Feb 2002 14:31:11 +1300 (New Zealand Daylight Time) From: Juha Saarinen To: freebsd-stable@freebsd.org Subject: Support for Win2K Dynamic Disks in -STABLE? Message-ID: X-Message-Flag: "Yummy... a Windows box! Hack! Hack! Hack!" X-X-Sender: juha@vimfuego.saarinen.org MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Windows 2000 has a new funky disk scheme, Dynamic Disks and Volumes, which basically allow an unlimited number of volumes on each physical disk (ie. no more traditional partitions and logical drives). I can't find it mentioned anywhere, but it looks to me that FreeBSD doesn't recognise this scheme, and therefore, you can't install it on a system with Dynamic Disk(s). Am I correct? -- Juha Take off every sig! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 17:35:25 2002 Delivered-To: freebsd-stable@freebsd.org Received: from dolphin.idleplay.net (ip68-11-107-40.no.no.cox.net [68.11.107.40]) by hub.freebsd.org (Postfix) with ESMTP id C17E337B42F; Wed, 6 Feb 2002 17:35:04 -0800 (PST) Received: (from conrads@localhost) by dolphin.idleplay.net (8.11.6/8.11.6) id g171Z4501336; Wed, 6 Feb 2002 19:35:04 -0600 (CST) (envelope-from conrads) Message-ID: X-Mailer: XFMail 1.5.1 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 Date: Wed, 06 Feb 2002 19:35:04 -0600 (CST) Reply-To: conrads@cox.net Organization: A Rag-Tag Band of Drug-crazed Hippies From: Conrad Sabatier To: questions@freebsd.org Subject: /usr/lib/libstdc++.so.3 contains no symbols Cc: stable@freebsd.org Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Can someone explain to me how a program is supposed to link against a shared library that contains no symbols? I've been having trouble for weeks now trying to build certain ports (xfmail, qt, avifile, to name a few). It seems to be C++ linkage problems, from what I can tell. I've successfully built some of these ports on a freshly installed system I setup for a friend, but not on this one. What am I not getting here and/or not doing right? I just cvsupped -stable again, rebuilt world and kernel (with COMPAT3x and COMPAT4x enabled in /etc/make.conf), and still get this: $ nm libstdc++.so.3 /usr/libexec/elf/nm: libstdc++.so.3: no symbols Apparently, /usr/lib/libstdc++.so.3 is being stripped of all its symbols before being installed! Tried installing the compat3x port, added /usr/local/lib/compat to the ldconfig paths, and still no good. Ports are still breaking during the builds. My CFLAGS in /etc/make.conf are simply "-O -pipe", and I'm using CPUTYPE=k7 (-march=k6). Frankly, I'm at a loss as to what to do. -- Conrad Sabatier Those who express random thoughts to legislative committees are often surprised and appalled to find themselves the instigators of law. -- Mark B. Cohen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 17:42:11 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mao.stokely.org (mao.stokely.org [65.84.64.228]) by hub.freebsd.org (Postfix) with ESMTP id 026BC37B443 for ; Wed, 6 Feb 2002 17:41:35 -0800 (PST) Received: by mao.stokely.org (Postfix, from userid 2074) id 79B2D4B65D; Wed, 6 Feb 2002 17:41:35 -0800 (PST) Date: Wed, 6 Feb 2002 17:41:35 -0800 From: Murray Stokely To: Rostislav Cc: freebsd-stable@freebsd.org Subject: Re: Official ISOs Message-ID: <20020207014135.GI7496@freebsdmall.com> References: <000a01c1aeea$21bf25c0$6601010a@pcsysadmin> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="z4+8/lEcDcG5Ke9S" Content-Disposition: inline In-Reply-To: <000a01c1aeea$21bf25c0$6601010a@pcsysadmin> User-Agent: Mutt/1.3.25i X-GPG-Key-ID: 1024D/0E451F7D X-GPG-Key-Fingerprint: E2CA 411D DD44 53FD BB4B 3CB5 B4D7 10A2 0E45 1F7D Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --z4+8/lEcDcG5Ke9S Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Wed, Feb 06, 2002 at 10:41:53AM +0200, Rostislav wrote: > It's already known fact that some packages (samba for example) are missing in official ISOs. So, is there any plans to reproduce the ISOs or maybe release new 4.5.1 RELEASE version, like 4.1.1 some time before? The extra KDE packages that were left off of Disc #1 were done so intentionally. We can fit "kdebase" onto the first disc, but it's simply not practical to include teTeX and a number of the other larger dependencies on the first CDROM. That would be unfair to Gnome and any number of smaller packages that would have to be removed to make room. The extra KDE packages were supposed to appear on disc #3 or 4, but they were left out of the package split, and since we haven't been in the habit of releasing all four discs as release candidates, this was not caught in time KDE will install and run fine from the first CDROM, but some of the optional KDE components are not there. Would you be interested in working on a "checklist" of must-have packages for the CDROM set? The package building team (portmgr@FreeBSD.org) could really use some assistance formalizing the procedure for splitting up the packages for the release. Alternatively, we could ask the package builders to post a package listing for discs 3 and 4 some number of weeks before the next release. I don't think that it is practical to distribute all four ISOs with each release candidates (I'd be satisfied if more users could download and provide feedback for just the first ISO), but it may be worthwhile to allow all of our -stable users to review the proposed package split to make sure all of the really important packages are on disc 1, and as many popular packages as will fit make discs 3 and 4. FWIW, we did add a number of packages to the disc 1 ISO based on user suggestions from the release candidates. If the package building team can provide a new split for discs 3 and 4 then we can reupload those to the FTP sites. This is no justification for a point release though -- this is a problem with the package set on the ISOs, there have been no major problem reports with the actual released system. This doesn't even affect net or DVD installs, for example, it is solely a problem with the disc3 and disc4 ISO images. I think that we're up to 9 CDROMs worth of FreeBSD packages from the ports tree. Clearly, with each release there is going to be more and more packages that don't make the cut. The FreeBSD Toolkit 6-CD set from FreeBSD Mall, and the DVD products from FreeBSD Services continue to be sources for these additional packages that don't make the 4 CD set. - Murray --z4+8/lEcDcG5Ke9S Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (SunOS) Comment: For info see http://www.gnupg.org iD8DBQE8YdtOtNcQog5FH30RAhDcAKDJ59BE/cO1NGE0LwQgA0uz4D7z0ACfZ7eV IFKB9LEjavpV6FD0uBR2Gw8= =JOMO -----END PGP SIGNATURE----- --z4+8/lEcDcG5Ke9S-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 17:43:53 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mao.stokely.org (mao.stokely.org [65.84.64.228]) by hub.freebsd.org (Postfix) with ESMTP id 8625537B428 for ; Wed, 6 Feb 2002 17:43:29 -0800 (PST) Received: by mao.stokely.org (Postfix, from userid 2074) id 166E74B65D; Wed, 6 Feb 2002 17:43:29 -0800 (PST) Date: Wed, 6 Feb 2002 17:43:29 -0800 From: Murray Stokely To: FreeBSD stable Cc: freebsd-stable@freebsd.org Subject: Re: Official ISOs Message-ID: <20020207014329.GJ7496@freebsdmall.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.25i X-GPG-Key-ID: 1024D/0E451F7D X-GPG-Key-Fingerprint: E2CA 411D DD44 53FD BB4B 3CB5 B4D7 10A2 0E45 1F7D Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Feb 06, 2002 at 12:47:12PM -0800, FreeBSD stable wrote: > cistron-radius disappeared from the packages as well, altho it *is* > present in ports. > > was this by design or error? I actually stopped an upload in progress based on a last minute communication from the security-officer team asking us to remove those packages from the release. - Murray To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 17:56:33 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mail19b.rapidsite.net (mail19b.rapidsite.net [161.58.134.134]) by hub.freebsd.org (Postfix) with SMTP id F271937B425 for ; Wed, 6 Feb 2002 17:56:28 -0800 (PST) Received: from 198.104.176.109 (198.104.176.109) by mail19b.rapidsite.net (RS ver 1.0.60s) with SMTP id 0102717753; Wed, 6 Feb 2002 21:00:41 -0500 (EST) Message-ID: <3C61DE20.9A4A5BBC@pythonemproject.com> Date: Wed, 06 Feb 2002 17:53:36 -0800 From: Rob X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.5-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: Juha Saarinen Cc: freebsd-stable@freebsd.org Subject: Re: Support for Win2K Dynamic Disks in -STABLE? References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Loop-Detect: 1 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Juha Saarinen wrote: > > Windows 2000 has a new funky disk scheme, Dynamic Disks and Volumes, which > basically allow an unlimited number of volumes on each physical disk (ie. > no more traditional partitions and logical drives). > > I can't find it mentioned anywhere, but it looks to me that FreeBSD > doesn't recognise this scheme, and therefore, you can't install it on a > system with Dynamic Disk(s). Am I correct? > > -- > Juha > Take off every sig! > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message Win2K works fine along side my FBSD system on my laptop. Rob. -- The Numeric Python EM Project www.pythonemproject.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 17:58:34 2002 Delivered-To: freebsd-stable@freebsd.org Received: from vimfuego.saarinen.org (saarinen.org [203.79.82.14]) by hub.freebsd.org (Postfix) with ESMTP id 9011837B419 for ; Wed, 6 Feb 2002 17:58:30 -0800 (PST) Received: from [192.168.1.10] (helo=den2) by vimfuego.saarinen.org with esmtp (Exim 3.33 #1 (Red Hack)) id 16YdpU-0001fr-00; Thu, 07 Feb 2002 14:58:28 +1300 Date: Thu, 7 Feb 2002 14:58:28 +1300 (New Zealand Daylight Time) From: Juha Saarinen To: Rob Cc: "freebsd-stable@freebsd.org" Subject: Re: Support for Win2K Dynamic Disks in -STABLE? In-Reply-To: <3C61DE20.9A4A5BBC@pythonemproject.com> Message-ID: X-Message-Flag: "Yummy... a Windows box! Hack! Hack! Hack!" X-X-Sender: juha@vimfuego.saarinen.org MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, 6 Feb 2002, Rob wrote: > Win2K works fine along side my FBSD system on my laptop. Rob. You can't have Dynamic Disks and Volumes on laptops, only standard ones. -- Juha Take off every sig! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 18:30:29 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mailout07.sul.t-online.com (mailout07.sul.t-online.com [194.25.134.83]) by hub.freebsd.org (Postfix) with ESMTP id 8180137B417; Wed, 6 Feb 2002 18:30:03 -0800 (PST) Received: from fwd07.sul.t-online.de by mailout07.sul.t-online.com with smtp id 16YeK2-0001KT-00; Thu, 07 Feb 2002 03:30:02 +0100 Received: from frolic.no-support.loc (520094253176-0001@[80.130.204.69]) by fmrl07.sul.t-online.com with esmtp id 16YeJx-1jJTMWC; Thu, 7 Feb 2002 03:29:57 +0100 Received: (from bjoern@localhost) by frolic.no-support.loc (8.11.6/8.9.3) id g172P7S02927; Thu, 7 Feb 2002 03:25:07 +0100 (CET) (envelope-from bjoern) From: Bjoern Fischer Date: Thu, 7 Feb 2002 03:25:07 +0100 To: Conrad Sabatier Cc: questions@FreeBSD.ORG, stable@FreeBSD.ORG Subject: Re: /usr/lib/libstdc++.so.3 contains no symbols Message-ID: <20020207022507.GA2102@frolic.no-support.loc> References: Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable In-Reply-To: User-Agent: Mutt/1.3.25i X-Sender: 520094253176-0001@t-dialin.net Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello Conrad, > What am I not getting here and/or not doing right? I just cvsupped -stab= le > again, rebuilt world and kernel (with COMPAT3x and COMPAT4x enabled in > /etc/make.conf), and still get this: >=20 > $ nm libstdc++.so.3 > /usr/libexec/elf/nm: libstdc++.so.3: no symbols Please consult the man page nm(1): [...] -D --dynamic Display the dynamic symbols rather than the normal symbols. This is only meaningful for dynamic ob=AD jects, such as certain types of shared libraries. [...] > Apparently, /usr/lib/libstdc++.so.3 is being stripped of all its symbols > before being installed! Not quite. Everything needed for dynamic linking is left in. -Bj=F6rn To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 20: 0:12 2002 Delivered-To: freebsd-stable@freebsd.org Received: from InterJet.dellroad.org (adsl-63-194-81-26.dsl.snfc21.pacbell.net [63.194.81.26]) by hub.freebsd.org (Postfix) with ESMTP id 249FB37B405; Wed, 6 Feb 2002 20:00:04 -0800 (PST) Received: from arch20m.dellroad.org (arch20m.dellroad.org [10.1.1.20]) by InterJet.dellroad.org (8.9.1a/8.9.1) with ESMTP id TAA79537; Wed, 6 Feb 2002 19:55:03 -0800 (PST) Received: (from archie@localhost) by arch20m.dellroad.org (8.11.6/8.11.6) id g173ss815948; Wed, 6 Feb 2002 19:54:54 -0800 (PST) (envelope-from archie) From: Archie Cobbs Message-Id: <200202070354.g173ss815948@arch20m.dellroad.org> Subject: Re: mpd-netgraph problem. In-Reply-To: <20020207092240.A12211@gurney.reilly.home> "from Andrew Reilly at Feb 7, 2002 09:22:40 am" To: Andrew Reilly Date: Wed, 6 Feb 2002 19:54:54 -0800 (PST) Cc: freebsd-stable@FreeBSD.ORG, freebsd-net@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL88 (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Andrew Reilly writes: > I've another, probably unrelated problem that has surfaced with > mpd-netgraph in the last couple of months. The work-around is > simple, which is why it's taken me so long to get around to > raising the issue. > > I start mpd-netgraph at boot time, to create a VPN link to my > office, with a script /usr/local/etc/rc.d/mpd. That used to > work fine, and I haven't changed my mpd configuration at all in > the mean time. > > For the last couple of months, though, this has resulted in no > ng0 node, and a log that looks like: > > Feb 5 21:41:46 gurney mpd: [vpn] can't create socket node: Exec format error Oops, I forgot to copy my reply to -net. In short, this sounds like some kind of KLD linking problem.. -Archie __________________________________________________________________________ Archie Cobbs * Packet Design * http://www.packetdesign.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 21: 4:28 2002 Delivered-To: freebsd-stable@freebsd.org Received: from areilly.bpc-users.org (CPE-144-132-240-160.nsw.bigpond.net.au [144.132.240.160]) by hub.freebsd.org (Postfix) with SMTP id AB2B037B428 for ; Wed, 6 Feb 2002 21:04:17 -0800 (PST) Received: (qmail 560 invoked from network); 7 Feb 2002 05:04:15 -0000 Received: from localhost (HELO gurney.reilly.home) (andrew@127.0.0.1) by localhost with SMTP; 7 Feb 2002 05:04:15 -0000 Date: Thu, 7 Feb 2002 16:04:15 +1100 From: Andrew Reilly To: Archie Cobbs Cc: freebsd-stable@freebsd.org, freebsd-net@freebsd.org Subject: Re: mpd-netgraph problem. Message-ID: <20020207160415.A479@gurney.lake> References: <20020207092240.A12211@gurney.reilly.home> <200202062340.g16Netx15097@arch20m.dellroad.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit In-Reply-To: <200202062340.g16Netx15097@arch20m.dellroad.org>; from archie@dellroad.org on Thu, Feb 07, 2002 at 10:40:55 +1100 X-Mailer: Balsa 1.3.0 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Archie, On 2002.02.07 10:40 Archie Cobbs wrote: > Andrew Reilly writes: > > I've another, probably unrelated problem that has surfaced with > > mpd-netgraph in the last couple of months. The work-around is > > simple, which is why it's taken me so long to get around to > > raising the issue. > > > > I start mpd-netgraph at boot time, to create a VPN link to my > > office, with a script /usr/local/etc/rc.d/mpd. That used to > > work fine, and I haven't changed my mpd configuration at all in > > the mean time. > > > > For the last couple of months, though, this has resulted in no > > ng0 node, and a log that looks like: > > > > Feb 5 21:41:46 gurney mpd: mpd: pid 240, version 3.6 (root@gurney.reilly.home 18:28 19-Jan-2002) > > Feb 5 21:41:46 gurney mpd: [vpn] can't create socket node: Exec format error > > This error is probably coming from the KLD module code. I'd say so. > Try making sure the ng_socket(4) KLD is loaded before starting mpd, > or just compiling all your netgraph modules statically into your > kernel.. ? I've just done that: copied all of the option NETGRAPH_* lines from LINT into GURNEY, my kernel config file. There's probably stuff in the kernel that I don't need now (ng_frame_relay, for starters!), but (a) it didn't whinge, and (b) the MS-PPTP VPN link came straight up at re-boot. > As an experiment, you could try replacing the invocation of mpd > in /usr/local/etc/rc.d/mpd to something like 'ngctl ls' and see > if ngctl sees the same error. It did indeed. There has also been another couple of console messages at boot that might bear on the problem: Feb 7 15:20:16 gurney /kernel: module_register: module netgraph already exists! Feb 7 15:20:16 gurney /kernel: linker_file_sysinit "netgraph.ko" failed to register! 17 As you can see, these still happen, but now (probably because all of the modules are compiled in) it isn't causing a problem. This always happened, before the recent kernel config change, because I have always had "options NETGRAPH" (alone) in my kernel config. Well, I have since I started using mpd-netgraph. Presumably this is simple pilot-error: I should either have put all of the netgraph options into my kernel or none. But perhaps this indicates an error with one kldload being taken too strongly, and short-circuiting the loading of subsequent modules? -- Andrew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 21:30: 8 2002 Delivered-To: freebsd-stable@freebsd.org Received: from InterJet.dellroad.org (adsl-63-194-81-26.dsl.snfc21.pacbell.net [63.194.81.26]) by hub.freebsd.org (Postfix) with ESMTP id 7CEB137B41E; Wed, 6 Feb 2002 21:30:02 -0800 (PST) Received: from arch20m.dellroad.org (arch20m.dellroad.org [10.1.1.20]) by InterJet.dellroad.org (8.9.1a/8.9.1) with ESMTP id VAA79992; Wed, 6 Feb 2002 21:14:22 -0800 (PST) Received: (from archie@localhost) by arch20m.dellroad.org (8.11.6/8.11.6) id g175EDx16223; Wed, 6 Feb 2002 21:14:13 -0800 (PST) (envelope-from archie) From: Archie Cobbs Message-Id: <200202070514.g175EDx16223@arch20m.dellroad.org> Subject: Re: mpd-netgraph problem. In-Reply-To: <20020207160415.A479@gurney.lake> "from Andrew Reilly at Feb 7, 2002 04:04:15 pm" To: Andrew Reilly Date: Wed, 6 Feb 2002 21:14:12 -0800 (PST) Cc: Archie Cobbs , freebsd-stable@freebsd.org, freebsd-net@freebsd.org X-Mailer: ELM [version 2.4ME+ PL88 (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Andrew Reilly writes: > Presumably this is simple pilot-error: I should either have put > all of the netgraph options into my kernel or none. But perhaps > this indicates an error with one kldload being taken too strongly, > and short-circuiting the loading of subsequent modules? There are long-standing bugs in the KLD module system that have yet to be fixed.. I think this is one of them. -Archie __________________________________________________________________________ Archie Cobbs * Packet Design * http://www.packetdesign.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 22: 3:10 2002 Delivered-To: freebsd-stable@freebsd.org Received: from eos.telenet-ops.be (eos.telenet-ops.be [195.130.132.40]) by hub.freebsd.org (Postfix) with ESMTP id E454B37B404 for ; Wed, 6 Feb 2002 22:03:08 -0800 (PST) Received: from purple.sytec.linknet.org (D5E03B2A.kabel.telenet.be [213.224.59.42]) by eos.telenet-ops.be (Postfix) with ESMTP id 1447B20232 for ; Thu, 7 Feb 2002 06:48:53 +0100 (CET) Date: Thu, 7 Feb 2002 07:03:24 +0100 From: Born Lolitas X-Mailer: The Bat! (v1.53d) Business Reply-To: Born Lolitas X-Priority: 3 (Normal) Message-ID: <11266971159.20020207070324@bornlolitas.com> To: freebsd-stable@FreeBSD.org Subject: subscribe MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 22:29:55 2002 Delivered-To: freebsd-stable@freebsd.org Received: from gatekeeper.inetworx.com.ph (phil-ville.com [202.61.77.129]) by hub.freebsd.org (Postfix) with ESMTP id DB14037B416; Wed, 6 Feb 2002 22:28:25 -0800 (PST) Received: from superserver.inetworx.com.ph (inetworx.com.ph [192.168.88.12]) by gatekeeper.inetworx.com.ph (8.11.6/8.11.1) with ESMTP id g1765KZ29590; Thu, 7 Feb 2002 14:05:20 +0800 (PHT) Received: from JASON by superserver.inetworx.com.ph with SMTP (Microsoft Exchange Internet Mail Service Version 5.0.1461.56) id 1MWTRS8B; Thu, 7 Feb 2002 13:53:25 +0800 Message-ID: <023501c1af9b$7ce52bf0$b958a8c0@JASON> From: "Jason" To: , Subject: compile error Date: Thu, 7 Feb 2002 13:51:28 +0800 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0232_01C1AFDE.8A973390" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0232_01C1AFDE.8A973390 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, I'm trying to compile my kernel. Doing "make all" gives me this error. = Please help. I'm using FreeBSD stable 4.5. In file included from linux_sysent.c:14: linux_proto.h:57: syntax error before `linux_time_t' linux_proto.h:57: `linux_time_t' undeclared here (not in a function) linux_proto.h:57: syntax error before `)' linux_proto.h:57: `linux_time_t' undeclared here (not in a function) linux_proto.h:57: syntax error before `)' linux_proto.h:156: syntax error before `linux_handler_t' linux_proto.h:156: `linux_handler_t' undeclared here (not in a function) linux_proto.h:156: `linux_handler_t' undeclared here (not in a function) linux_proto.h:184: syntax error before `linux_dev_t' linux_proto.h:184: `linux_dev_t' undeclared here (not in a function) linux_proto.h:184: `linux_dev_t' undeclared here (not in a function) linux_proto.h:189: syntax error before `linux_osigaction_t' linux_proto.h:189: `linux_osigaction_t' undeclared here (not in a = function) linux_proto.h:189: syntax error before `)' linux_proto.h:189: `linux_osigaction_t' undeclared here (not in a = function) linux_proto.h:189: syntax error before `)' linux_proto.h:190: syntax error before `linux_osigaction_t' linux_proto.h:190: `linux_osigaction_t' undeclared here (not in a = function) linux_proto.h:190: syntax error before `)' linux_proto.h:190: `linux_osigaction_t' undeclared here (not in a = function) linux_proto.h:190: syntax error before `)' linux_proto.h:196: syntax error before `linux_osigset_t' linux_proto.h:196: `linux_osigset_t' undeclared here (not in a function) linux_proto.h:196: `linux_osigset_t' undeclared here (not in a function) linux_proto.h:200: syntax error before `linux_osigset_t' linux_proto.h:200: `linux_osigset_t' undeclared here (not in a function) linux_proto.h:200: `linux_osigset_t' undeclared here (not in a function) linux_proto.h:201: syntax error before `linux_osigset_t' linux_proto.h:201: `linux_osigset_t' undeclared here (not in a function) linux_proto.h:201: `linux_osigset_t' undeclared here (not in a function) linux_proto.h:204: syntax error before `linux_osigset_t' linux_proto.h:204: `linux_osigset_t' undeclared here (not in a function) linux_proto.h:204: syntax error before `)' linux_proto.h:204: `linux_osigset_t' undeclared here (not in a function) linux_proto.h:204: syntax error before `)' linux_proto.h:216: syntax error before `linux_gid_t' linux_proto.h:216: `linux_gid_t' undeclared here (not in a function) linux_proto.h:216: syntax error before `)' linux_proto.h:216: `linux_gid_t' undeclared here (not in a function) linux_proto.h:216: syntax error before `)' linux_proto.h:220: syntax error before `linux_gid_t' linux_proto.h:220: `linux_gid_t' undeclared here (not in a function) linux_proto.h:220: syntax error before `)' linux_proto.h:220: `linux_gid_t' undeclared here (not in a function) linux_proto.h:220: syntax error before `)' linux_proto.h:344: syntax error before `linux_osigset_t' linux_proto.h:344: `linux_osigset_t' undeclared here (not in a function) linux_proto.h:344: syntax error before `)' linux_proto.h:344: `linux_osigset_t' undeclared here (not in a function) linux_proto.h:344: syntax error before `)' linux_proto.h:345: syntax error before `linux_osigset_t' linux_proto.h:345: `linux_osigset_t' undeclared here (not in a function) linux_proto.h:345: syntax error before `)' linux_proto.h:345: `linux_osigset_t' undeclared here (not in a function) linux_proto.h:345: syntax error before `)' linux_proto.h:380: syntax error before `linux_uid_t' linux_proto.h:380: `linux_uid_t' undeclared here (not in a function) linux_proto.h:380: `linux_uid_t' undeclared here (not in a function) linux_proto.h:383: syntax error before `linux_gid_t' linux_proto.h:383: `linux_gid_t' undeclared here (not in a function) linux_proto.h:383: `linux_gid_t' undeclared here (not in a function) linux_proto.h:410: syntax error before `linux_pid_t' linux_proto.h:410: `linux_pid_t' undeclared here (not in a function) linux_proto.h:410: `linux_pid_t' undeclared here (not in a function) linux_proto.h:439: syntax error before `linux_uid_t' linux_proto.h:439: `linux_uid_t' undeclared here (not in a function) linux_proto.h:439: syntax error before `)' linux_proto.h:439: `linux_uid_t' undeclared here (not in a function) linux_proto.h:439: syntax error before `)' linux_proto.h:440: syntax error before `linux_uid_t' linux_proto.h:440: `linux_uid_t' undeclared here (not in a function) linux_proto.h:440: syntax error before `)' linux_proto.h:440: `linux_uid_t' undeclared here (not in a function) linux_proto.h:440: syntax error before `)' linux_proto.h:441: syntax error before `linux_uid_t' linux_proto.h:441: `linux_uid_t' undeclared here (not in a function) linux_proto.h:441: syntax error before `)' linux_proto.h:441: `linux_uid_t' undeclared here (not in a function) linux_proto.h:441: syntax error before `)' linux_proto.h:453: syntax error before `linux_gid_t' linux_proto.h:453: `linux_gid_t' undeclared here (not in a function) linux_proto.h:453: syntax error before `)' linux_proto.h:453: `linux_gid_t' undeclared here (not in a function) linux_proto.h:453: syntax error before `)' linux_proto.h:454: syntax error before `linux_gid_t' linux_proto.h:454: `linux_gid_t' undeclared here (not in a function) linux_proto.h:454: syntax error before `)' linux_proto.h:454: `linux_gid_t' undeclared here (not in a function) linux_proto.h:454: syntax error before `)' linux_proto.h:455: syntax error before `linux_gid_t' linux_proto.h:455: `linux_gid_t' undeclared here (not in a function) linux_proto.h:455: syntax error before `)' linux_proto.h:455: `linux_gid_t' undeclared here (not in a function) linux_proto.h:455: syntax error before `)' linux_proto.h:465: syntax error before `linux_sigaction_t' linux_proto.h:465: `linux_sigaction_t' undeclared here (not in a = function) linux_proto.h:465: syntax error before `)' linux_proto.h:465: `linux_sigaction_t' undeclared here (not in a = function) linux_proto.h:465: syntax error before `)' linux_proto.h:466: syntax error before `linux_sigaction_t' linux_proto.h:466: `linux_sigaction_t' undeclared here (not in a = function) linux_proto.h:466: syntax error before `)' linux_proto.h:466: `linux_sigaction_t' undeclared here (not in a = function) linux_proto.h:466: syntax error before `)' linux_proto.h:471: syntax error before `linux_sigset_t' linux_proto.h:471: `linux_sigset_t' undeclared here (not in a function) linux_proto.h:471: syntax error before `)' linux_proto.h:471: `linux_sigset_t' undeclared here (not in a function) linux_proto.h:471: syntax error before `)' linux_proto.h:472: syntax error before `linux_sigset_t' linux_proto.h:472: `linux_sigset_t' undeclared here (not in a function) linux_proto.h:472: syntax error before `)' linux_proto.h:472: `linux_sigset_t' undeclared here (not in a function) linux_proto.h:472: syntax error before `)' linux_proto.h:485: syntax error before `linux_sigset_t' linux_proto.h:485: `linux_sigset_t' undeclared here (not in a function) linux_proto.h:485: syntax error before `)' linux_proto.h:485: `linux_sigset_t' undeclared here (not in a function) linux_proto.h:485: syntax error before `)' linux_proto.h:516: syntax error before `*' linux_proto.h:516: syntax error before `linux_stack_t' linux_proto.h:516: syntax error before `linux_stack_t' linux_proto.h:517: syntax error before `linux_stack_t' linux_proto.h:517: `linux_stack_t' undeclared here (not in a function) linux_proto.h:517: syntax error before `)' linux_proto.h:517: `linux_stack_t' undeclared here (not in a function) linux_proto.h:517: syntax error before `)' linux_sysent.c:21: sizeof applied to an incomplete type linux_sysent.c:21: warning: built-in function `exit' used without = declaration linux_sysent.c:21: warning: cast discards qualifiers from pointer target = type *** Error code 1 Stop in /usr/src/sys/modules/linux. *** Error code 1 Stop in /usr/src/sys/modules. *** Error code 1 Stop in /usr/src/sys/compile/WWW. TIA Jason ------=_NextPart_000_0232_01C1AFDE.8A973390 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hello,
 
I'm trying to compile my kernel.  = Doing "make=20 all" gives me this error.  Please help.  I'm using FreeBSD = stable=20 4.5.
 
In file included from=20 linux_sysent.c:14:
linux_proto.h:57: syntax error before=20 `linux_time_t'
linux_proto.h:57: `linux_time_t' undeclared here (not = in a=20 function)
linux_proto.h:57: syntax error before = `)'
linux_proto.h:57:=20 `linux_time_t' undeclared here (not in a function)
linux_proto.h:57: = syntax=20 error before `)'
linux_proto.h:156: syntax error before=20 `linux_handler_t'
linux_proto.h:156: `linux_handler_t' undeclared = here (not=20 in a function)
linux_proto.h:156: `linux_handler_t' undeclared here = (not in a=20 function)
linux_proto.h:184: syntax error before=20 `linux_dev_t'
linux_proto.h:184: `linux_dev_t' undeclared here (not = in a=20 function)
linux_proto.h:184: `linux_dev_t' undeclared here (not in a=20 function)
linux_proto.h:189: syntax error before=20 `linux_osigaction_t'
linux_proto.h:189: `linux_osigaction_t' = undeclared here=20 (not in a function)
linux_proto.h:189: syntax error before=20 `)'
linux_proto.h:189: `linux_osigaction_t' undeclared here (not in a = function)
linux_proto.h:189: syntax error before = `)'
linux_proto.h:190:=20 syntax error before `linux_osigaction_t'
linux_proto.h:190:=20 `linux_osigaction_t' undeclared here (not in a = function)
linux_proto.h:190:=20 syntax error before `)'
linux_proto.h:190: `linux_osigaction_t' = undeclared=20 here (not in a function)
linux_proto.h:190: syntax error before=20 `)'
linux_proto.h:196: syntax error before=20 `linux_osigset_t'
linux_proto.h:196: `linux_osigset_t' undeclared = here (not=20 in a function)
linux_proto.h:196: `linux_osigset_t' undeclared here = (not in a=20 function)
linux_proto.h:200: syntax error before=20 `linux_osigset_t'
linux_proto.h:200: `linux_osigset_t' undeclared = here (not=20 in a function)
linux_proto.h:200: `linux_osigset_t' undeclared here = (not in a=20 function)
linux_proto.h:201: syntax error before=20 `linux_osigset_t'
linux_proto.h:201: `linux_osigset_t' undeclared = here (not=20 in a function)
linux_proto.h:201: `linux_osigset_t' undeclared here = (not in a=20 function)
linux_proto.h:204: syntax error before=20 `linux_osigset_t'
linux_proto.h:204: `linux_osigset_t' undeclared = here (not=20 in a function)
linux_proto.h:204: syntax error before=20 `)'
linux_proto.h:204: `linux_osigset_t' undeclared here (not in a=20 function)
linux_proto.h:204: syntax error before = `)'
linux_proto.h:216:=20 syntax error before `linux_gid_t'
linux_proto.h:216: `linux_gid_t' = undeclared=20 here (not in a function)
linux_proto.h:216: syntax error before=20 `)'
linux_proto.h:216: `linux_gid_t' undeclared here (not in a=20 function)
linux_proto.h:216: syntax error before = `)'
linux_proto.h:220:=20 syntax error before `linux_gid_t'
linux_proto.h:220: `linux_gid_t' = undeclared=20 here (not in a function)
linux_proto.h:220: syntax error before=20 `)'
linux_proto.h:220: `linux_gid_t' undeclared here (not in a=20 function)
linux_proto.h:220: syntax error before = `)'
linux_proto.h:344:=20 syntax error before `linux_osigset_t'
linux_proto.h:344: = `linux_osigset_t'=20 undeclared here (not in a function)
linux_proto.h:344: syntax error = before=20 `)'
linux_proto.h:344: `linux_osigset_t' undeclared here (not in a=20 function)
linux_proto.h:344: syntax error before = `)'
linux_proto.h:345:=20 syntax error before `linux_osigset_t'
linux_proto.h:345: = `linux_osigset_t'=20 undeclared here (not in a function)
linux_proto.h:345: syntax error = before=20 `)'
linux_proto.h:345: `linux_osigset_t' undeclared here (not in a=20 function)
linux_proto.h:345: syntax error before = `)'
linux_proto.h:380:=20 syntax error before `linux_uid_t'
linux_proto.h:380: `linux_uid_t' = undeclared=20 here (not in a function)
linux_proto.h:380: `linux_uid_t' undeclared = here=20 (not in a function)
linux_proto.h:383: syntax error before=20 `linux_gid_t'
linux_proto.h:383: `linux_gid_t' undeclared here (not = in a=20 function)
linux_proto.h:383: `linux_gid_t' undeclared here (not in a=20 function)
linux_proto.h:410: syntax error before=20 `linux_pid_t'
linux_proto.h:410: `linux_pid_t' undeclared here (not = in a=20 function)
linux_proto.h:410: `linux_pid_t' undeclared here (not in a=20 function)
linux_proto.h:439: syntax error before=20 `linux_uid_t'
linux_proto.h:439: `linux_uid_t' undeclared here (not = in a=20 function)
linux_proto.h:439: syntax error before = `)'
linux_proto.h:439:=20 `linux_uid_t' undeclared here (not in a function)
linux_proto.h:439: = syntax=20 error before `)'
linux_proto.h:440: syntax error before=20 `linux_uid_t'
linux_proto.h:440: `linux_uid_t' undeclared here (not = in a=20 function)
linux_proto.h:440: syntax error before = `)'
linux_proto.h:440:=20 `linux_uid_t' undeclared here (not in a function)
linux_proto.h:440: = syntax=20 error before `)'
linux_proto.h:441: syntax error before=20 `linux_uid_t'
linux_proto.h:441: `linux_uid_t' undeclared here (not = in a=20 function)
linux_proto.h:441: syntax error before = `)'
linux_proto.h:441:=20 `linux_uid_t' undeclared here (not in a function)
linux_proto.h:441: = syntax=20 error before `)'
linux_proto.h:453: syntax error before=20 `linux_gid_t'
linux_proto.h:453: `linux_gid_t' undeclared here (not = in a=20 function)
linux_proto.h:453: syntax error before = `)'
linux_proto.h:453:=20 `linux_gid_t' undeclared here (not in a function)
linux_proto.h:453: = syntax=20 error before `)'
linux_proto.h:454: syntax error before=20 `linux_gid_t'
linux_proto.h:454: `linux_gid_t' undeclared here (not = in a=20 function)
linux_proto.h:454: syntax error before = `)'
linux_proto.h:454:=20 `linux_gid_t' undeclared here (not in a function)
linux_proto.h:454: = syntax=20 error before `)'
linux_proto.h:455: syntax error before=20 `linux_gid_t'
linux_proto.h:455: `linux_gid_t' undeclared here (not = in a=20 function)
linux_proto.h:455: syntax error before = `)'
linux_proto.h:455:=20 `linux_gid_t' undeclared here (not in a function)
linux_proto.h:455: = syntax=20 error before `)'
linux_proto.h:465: syntax error before=20 `linux_sigaction_t'
linux_proto.h:465: `linux_sigaction_t' undeclared = here=20 (not in a function)
linux_proto.h:465: syntax error before=20 `)'
linux_proto.h:465: `linux_sigaction_t' undeclared here (not in a=20 function)
linux_proto.h:465: syntax error before = `)'
linux_proto.h:466:=20 syntax error before `linux_sigaction_t'
linux_proto.h:466:=20 `linux_sigaction_t' undeclared here (not in a = function)
linux_proto.h:466:=20 syntax error before `)'
linux_proto.h:466: `linux_sigaction_t' = undeclared=20 here (not in a function)
linux_proto.h:466: syntax error before=20 `)'
linux_proto.h:471: syntax error before=20 `linux_sigset_t'
linux_proto.h:471: `linux_sigset_t' undeclared here = (not in=20 a function)
linux_proto.h:471: syntax error before = `)'
linux_proto.h:471:=20 `linux_sigset_t' undeclared here (not in a = function)
linux_proto.h:471:=20 syntax error before `)'
linux_proto.h:472: syntax error before=20 `linux_sigset_t'
linux_proto.h:472: `linux_sigset_t' undeclared here = (not in=20 a function)
linux_proto.h:472: syntax error before = `)'
linux_proto.h:472:=20 `linux_sigset_t' undeclared here (not in a = function)
linux_proto.h:472:=20 syntax error before `)'
linux_proto.h:485: syntax error before=20 `linux_sigset_t'
linux_proto.h:485: `linux_sigset_t' undeclared here = (not in=20 a function)
linux_proto.h:485: syntax error before = `)'
linux_proto.h:485:=20 `linux_sigset_t' undeclared here (not in a = function)
linux_proto.h:485:=20 syntax error before `)'
linux_proto.h:516: syntax error before=20 `*'
linux_proto.h:516: syntax error before=20 `linux_stack_t'
linux_proto.h:516: syntax error before=20 `linux_stack_t'
linux_proto.h:517: syntax error before=20 `linux_stack_t'
linux_proto.h:517: `linux_stack_t' undeclared here = (not in a=20 function)
linux_proto.h:517: syntax error before = `)'
linux_proto.h:517:=20 `linux_stack_t' undeclared here (not in a = function)
linux_proto.h:517: syntax=20 error before `)'
linux_sysent.c:21: sizeof applied to an incomplete=20 type
linux_sysent.c:21: warning: built-in function `exit' used = without=20 declaration
linux_sysent.c:21: warning: cast discards qualifiers from = pointer=20 target type
*** Error code 1
 
Stop in = /usr/src/sys/modules/linux.
*** Error=20 code 1
 
Stop in /usr/src/sys/modules.
*** = Error code=20 1
 
Stop in = /usr/src/sys/compile/WWW.
 
 
TIA
 
Jason
------=_NextPart_000_0232_01C1AFDE.8A973390-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Feb 6 22:47: 3 2002 Delivered-To: freebsd-stable@freebsd.org Received: from smtp.bmi.net (smtp.bmi.net [204.57.191.31]) by hub.freebsd.org (Postfix) with ESMTP id 429E037B422; Wed, 6 Feb 2002 22:46:40 -0800 (PST) Received: from johncoop.MSHOME (drumheller-router.bmi.net [206.63.201.3] (may be forged)) by smtp.bmi.net (Pro-8.9.3/Pro-8.9.3) with ESMTP id WAA09933; Wed, 6 Feb 2002 22:46:25 -0800 Date: Wed, 6 Feb 2002 22:46:12 -0800 From: John Merryweather Cooper To: Jason Cc: freebsd-questions@freebsd.org, freebsd-stable@freebsd.org Subject: Re: compile error Message-ID: <20020206224612.E23198@johncoop.MSHOME> References: <023501c1af9b$7ce52bf0$b958a8c0@JASON> Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit In-Reply-To: <023501c1af9b$7ce52bf0$b958a8c0@JASON>; from jason@inetworx.com.ph on Wed, Feb 06, 2002 at 21:51:28 -0800 X-Mailer: Balsa 1.3.0 Lines: 218 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Follow the instructions in the documentation for building a kernel. 'make all' is NOT the way to do it. :) Generally, one builds a "world" to make sure that "world" stays in sync with the kernel (or else very bad things may happen). Then (and only then) does a kernel get built. Assuming you have a working kernel configuration file in /sys/i386/conf with "SOME_NAME," the safe-and-sane build sequence, usually looks like (from memory): # cd /usr/src # make buildworld # make buildkernel KERNCONF=SOME_NAME # make installkernel KERNCONF=SOME_NAME # make installworld You may need to reboot into single-user mode to successfully install (that will depend on your configuration, etc.) And the order may have changed (read the documentation); and there are shortcuts for the brave-or-foolhardy (which I won't discuss here). But don't trust me, read the doc. :) P.S. This belongs strictly on questions, cross-posting is "impolite." On 2002.02.06 21:51 Jason wrote: > Hello, > > I'm trying to compile my kernel. Doing "make all" gives me this > error. Please help. I'm using FreeBSD stable 4.5. > > In file included from linux_sysent.c:14: > linux_proto.h:57: syntax error before `linux_time_t' > linux_proto.h:57: `linux_time_t' undeclared here (not in a function) > linux_proto.h:57: syntax error before `)' > linux_proto.h:57: `linux_time_t' undeclared here (not in a function) > linux_proto.h:57: syntax error before `)' > linux_proto.h:156: syntax error before `linux_handler_t' > linux_proto.h:156: `linux_handler_t' undeclared here (not in a > function) > linux_proto.h:156: `linux_handler_t' undeclared here (not in a > function) > linux_proto.h:184: syntax error before `linux_dev_t' > linux_proto.h:184: `linux_dev_t' undeclared here (not in a function) > linux_proto.h:184: `linux_dev_t' undeclared here (not in a function) > linux_proto.h:189: syntax error before `linux_osigaction_t' > linux_proto.h:189: `linux_osigaction_t' undeclared here (not in a > function) > linux_proto.h:189: syntax error before `)' > linux_proto.h:189: `linux_osigaction_t' undeclared here (not in a > function) > linux_proto.h:189: syntax error before `)' > linux_proto.h:190: syntax error before `linux_osigaction_t' > linux_proto.h:190: `linux_osigaction_t' undeclared here (not in a > function) > linux_proto.h:190: syntax error before `)' > linux_proto.h:190: `linux_osigaction_t' undeclared here (not in a > function) > linux_proto.h:190: syntax error before `)' > linux_proto.h:196: syntax error before `linux_osigset_t' > linux_proto.h:196: `linux_osigset_t' undeclared here (not in a > function) > linux_proto.h:196: `linux_osigset_t' undeclared here (not in a > function) > linux_proto.h:200: syntax error before `linux_osigset_t' > linux_proto.h:200: `linux_osigset_t' undeclared here (not in a > function) > linux_proto.h:200: `linux_osigset_t' undeclared here (not in a > function) > linux_proto.h:201: syntax error before `linux_osigset_t' > linux_proto.h:201: `linux_osigset_t' undeclared here (not in a > function) > linux_proto.h:201: `linux_osigset_t' undeclared here (not in a > function) > linux_proto.h:204: syntax error before `linux_osigset_t' > linux_proto.h:204: `linux_osigset_t' undeclared here (not in a > function) > linux_proto.h:204: syntax error before `)' > linux_proto.h:204: `linux_osigset_t' undeclared here (not in a > function) > linux_proto.h:204: syntax error before `)' > linux_proto.h:216: syntax error before `linux_gid_t' > linux_proto.h:216: `linux_gid_t' undeclared here (not in a function) > linux_proto.h:216: syntax error before `)' > linux_proto.h:216: `linux_gid_t' undeclared here (not in a function) > linux_proto.h:216: syntax error before `)' > linux_proto.h:220: syntax error before `linux_gid_t' > linux_proto.h:220: `linux_gid_t' undeclared here (not in a function) > linux_proto.h:220: syntax error before `)' > linux_proto.h:220: `linux_gid_t' undeclared here (not in a function) > linux_proto.h:220: syntax error before `)' > linux_proto.h:344: syntax error before `linux_osigset_t' > linux_proto.h:344: `linux_osigset_t' undeclared here (not in a > function) > linux_proto.h:344: syntax error before `)' > linux_proto.h:344: `linux_osigset_t' undeclared here (not in a > function) > linux_proto.h:344: syntax error before `)' > linux_proto.h:345: syntax error before `linux_osigset_t' > linux_proto.h:345: `linux_osigset_t' undeclared here (not in a > function) > linux_proto.h:345: syntax error before `)' > linux_proto.h:345: `linux_osigset_t' undeclared here (not in a > function) > linux_proto.h:345: syntax error before `)' > linux_proto.h:380: syntax error before `linux_uid_t' > linux_proto.h:380: `linux_uid_t' undeclared here (not in a function) > linux_proto.h:380: `linux_uid_t' undeclared here (not in a function) > linux_proto.h:383: syntax error before `linux_gid_t' > linux_proto.h:383: `linux_gid_t' undeclared here (not in a function) > linux_proto.h:383: `linux_gid_t' undeclared here (not in a function) > linux_proto.h:410: syntax error before `linux_pid_t' > linux_proto.h:410: `linux_pid_t' undeclared here (not in a function) > linux_proto.h:410: `linux_pid_t' undeclared here (not in a function) > linux_proto.h:439: syntax error before `linux_uid_t' > linux_proto.h:439: `linux_uid_t' undeclared here (not in a function) > linux_proto.h:439: syntax error before `)' > linux_proto.h:439: `linux_uid_t' undeclared here (not in a function) > linux_proto.h:439: syntax error before `)' > linux_proto.h:440: syntax error before `linux_uid_t' > linux_proto.h:440: `linux_uid_t' undeclared here (not in a function) > linux_proto.h:440: syntax error before `)' > linux_proto.h:440: `linux_uid_t' undeclared here (not in a function) > linux_proto.h:440: syntax error before `)' > linux_proto.h:441: syntax error before `linux_uid_t' > linux_proto.h:441: `linux_uid_t' undeclared here (not in a function) > linux_proto.h:441: syntax error before `)' > linux_proto.h:441: `linux_uid_t' undeclared here (not in a function) > linux_proto.h:441: syntax error before `)' > linux_proto.h:453: syntax error before `linux_gid_t' > linux_proto.h:453: `linux_gid_t' undeclared here (not in a function) > linux_proto.h:453: syntax error before `)' > linux_proto.h:453: `linux_gid_t' undeclared here (not in a function) > linux_proto.h:453: syntax error before `)' > linux_proto.h:454: syntax error before `linux_gid_t' > linux_proto.h:454: `linux_gid_t' undeclared here (not in a function) > linux_proto.h:454: syntax error before `)' > linux_proto.h:454: `linux_gid_t' undeclared here (not in a function) > linux_proto.h:454: syntax error before `)' > linux_proto.h:455: syntax error before `linux_gid_t' > linux_proto.h:455: `linux_gid_t' undeclared here (not in a function) > linux_proto.h:455: syntax error before `)' > linux_proto.h:455: `linux_gid_t' undeclared here (not in a function) > linux_proto.h:455: syntax error before `)' > linux_proto.h:465: syntax error before `linux_sigaction_t' > linux_proto.h:465: `linux_sigaction_t' undeclared here (not in a > function) > linux_proto.h:465: syntax error before `)' > linux_proto.h:465: `linux_sigaction_t' undeclared here (not in a > function) > linux_proto.h:465: syntax error before `)' > linux_proto.h:466: syntax error before `linux_sigaction_t' > linux_proto.h:466: `linux_sigaction_t' undeclared here (not in a > function) > linux_proto.h:466: syntax error before `)' > linux_proto.h:466: `linux_sigaction_t' undeclared here (not in a > function) > linux_proto.h:466: syntax error before `)' > linux_proto.h:471: syntax error before `linux_sigset_t' > linux_proto.h:471: `linux_sigset_t' undeclared here (not in a > function) > linux_proto.h:471: syntax error before `)' > linux_proto.h:471: `linux_sigset_t' undeclared here (not in a > function) > linux_proto.h:471: syntax error before `)' > linux_proto.h:472: syntax error before `linux_sigset_t' > linux_proto.h:472: `linux_sigset_t' undeclared here (not in a > function) > linux_proto.h:472: syntax error before `)' > linux_proto.h:472: `linux_sigset_t' undeclared here (not in a > function) > linux_proto.h:472: syntax error before `)' > linux_proto.h:485: syntax error before `linux_sigset_t' > linux_proto.h:485: `linux_sigset_t' undeclared here (not in a > function) > linux_proto.h:485: syntax error before `)' > linux_proto.h:485: `linux_sigset_t' undeclared here (not in a > function) > linux_proto.h:485: syntax error before `)' > linux_proto.h:516: syntax error before `*' > linux_proto.h:516: syntax error before `linux_stack_t' > linux_proto.h:516: syntax error before `linux_stack_t' > linux_proto.h:517: syntax error before `linux_stack_t' > linux_proto.h:517: `linux_stack_t' undeclared here (not in a function) > linux_proto.h:517: syntax error before `)' > linux_proto.h:517: `linux_stack_t' undeclared here (not in a function) > linux_proto.h:517: syntax error before `)' > linux_sysent.c:21: sizeof applied to an incomplete type > linux_sysent.c:21: warning: built-in function `exit' used without > declaration > linux_sysent.c:21: warning: cast discards qualifiers from pointer > target type > *** Error code 1 > > Stop in /usr/src/sys/modules/linux. > *** Error code 1 > > Stop in /usr/src/sys/modules. > *** Error code 1 > > Stop in /usr/src/sys/compile/WWW. > > > TIA > > Jason > -- _ | |V| / ' || MacroHard -- \ \_| | | \_, || the perfection of form over | ----------------------------------|| substance, marketing over | Web: http://www.borgsdemons.com || performance, and greed over | AIM: johnmcooper || design . . . | =====================================================================/ Public Key: http://www.borgsdemons.com/Personal/pgpkey.asc | =====================================================================\ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 0: 7:40 2002 Delivered-To: freebsd-stable@freebsd.org Received: from omahpop2.omah.uswest.net (omahpop2.omah.uswest.net [204.26.64.2]) by hub.freebsd.org (Postfix) with SMTP id 7707B37B41F for ; Thu, 7 Feb 2002 00:07:35 -0800 (PST) Received: (qmail 17827 invoked by alias); 7 Feb 2002 08:07:34 -0000 Delivered-To: fixup-freebsd-stable@freebsd.org@fixme Received: (qmail 17802 invoked by uid 0); 7 Feb 2002 08:07:33 -0000 Received: from omah6400gw2poolb124.omah.uswest.net (HELO kristen.shadowdale.net) (63.227.157.124) by omahpop2.omah.uswest.net with SMTP; 7 Feb 2002 08:07:33 -0000 Date: Thu, 7 Feb 2002 02:07:34 -0600 (CST) From: Bovine Unit #243 To: FreeBSD Questions , FreeBSD Stable Subject: DPT SmartRAID IV & >128GB drives Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I just tried out Seagate 180GB on DPT SmartRAID IV, with the box running 3.5-STABLE (last installworld 2002/01/02). Well, the kernel output says the drive was identified as 128GB drive (ouch!). When I tried to run sysinstall, it triggered segmentation fault. Well, that ain't a problem, as this box is being planned to upgraded to 4.x. What I'm worried is DPT and the big drive. Since DPT was swallowed by Adaptec, I don't expect much from them. (I didn't have much luck with Adaptec tech support for few years now.) I'd like to know if DPT+180GB behavior is an anomaly on my setup or is it a known problem? I'm hoping there are good numbers of people here who had BTDT with DPT SRIV to give some comments...? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 0:45:39 2002 Delivered-To: freebsd-stable@freebsd.org Received: from www.svzserv.kemerovo.su (www.svzserv.kemerovo.su [213.184.65.80]) by hub.freebsd.org (Postfix) with ESMTP id 1531837B422 for ; Thu, 7 Feb 2002 00:45:33 -0800 (PST) Received: (from eugen@localhost) by www.svzserv.kemerovo.su (8.11.6/8.11.6) id g178jTx93009 for stable@freebsd.org; Thu, 7 Feb 2002 15:45:29 +0700 (KRAT) (envelope-from eugen) Date: Thu, 7 Feb 2002 15:45:29 +0700 From: Eugene Grosbein To: stable@freebsd.org Subject: ipfw limit option Message-ID: <20020207154529.A92095@svzserv.kemerovo.su> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi! I'm trying to utilize ipfw limit option with 4.5-STABLE. Till now I had stateless ipfw configuration that worked fine. Now I need to limit one of my TCP services with only 5 sessions per IP. The service itself has global limit of 50 simultaneous connections but cannot limit the number of connections per IP. And it is abused. I have following rules for the service bound to TCP port 8888: $fwcmd add 60130 pipe 3 tcp from $my_ip 8888 to any # for traffic shaping $fwcmd add 60135 allow tcp from any to $my_ip 8888 Now I changed rule 60135 to $fwcmd add 60135 allow tcp from any to $my_ip 8888 limit src-addr 5 This work basically, but: 1. Sometimes I see 8 connections per 1 ip, 6 are ESTABLESHED and 2 are CLOSE_WAIT. That does not bothers me too much but it shows: that code is not very exact. 2. The kernel fills my logs and console with TONS of messages: Feb 7 15:11:32 www /kernel: OUCH! cannot remove rule, count 2 Feb 7 15:11:32 www /kernel: drop session, too many entries Feb 7 15:11:32 www last message repeated 3 times Feb 7 15:11:33 www /kernel: OUCH! cannot remove rule, count 2 Feb 7 15:11:33 www /kernel: drop session, too many entries Feb 7 15:11:34 www last message repeated 80 times And so on. That's not what I expect to receive. How can 'drop session' messages be silenced? And what do 'OUCH!' messages mean? Eugene Grosbein To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 0:54: 2 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mile.nevermind.kiev.ua (freebsddiary.org.ua [213.186.199.26]) by hub.freebsd.org (Postfix) with ESMTP id CC66537B41B for ; Thu, 7 Feb 2002 00:53:55 -0800 (PST) Received: (from never@localhost) by mile.nevermind.kiev.ua (8.11.6/8.11.4) id g178sKr69695; Thu, 7 Feb 2002 10:54:20 +0200 (EET) (envelope-from never) Date: Thu, 7 Feb 2002 10:54:20 +0200 From: Nevermind To: Wilko Bulte Cc: JJ Behrens , Rossam Souza Silva , freebsd-stable@FreeBSD.ORG Subject: Re: KDE mixup: was samba package Message-ID: <20020207085419.GA69433@nevermind.kiev.ua> References: <20020204122425.A27402@alicia.nttmcl.com> <20020205123552.A634@alicia.nttmcl.com> <20020206090420.GB61267@nevermind.kiev.ua> <20020206205745.E11849@freebie.xs4all.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=koi8-r Content-Disposition: inline In-Reply-To: <20020206205745.E11849@freebie.xs4all.nl> User-Agent: Mutt/1.3.26i Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, Wilko Bulte! On Wed, Feb 06, 2002 at 08:57:45PM +0100, you wrote: > > > There was an unfortunate accident. The FreeBSD KDE team was attempting to > > > reduce the amount of KDE material on the first CD, and (accidentally) the > > > material didn't make it onto any of the CD's. > > > Maybe we should do better checking of -RELEASE for this? I see the > > strange things doing since 4.1, we are getting closer and closer to > > those linux kIdZ, who does not care how thier code works, wether their > > gcc 3.x.x will work with all stuff and produce a good code, and so on. > > So, I take it you will volunteer to check the 6000+ ports & packages? Wilko, I mean that we should make a list which should be like "core packages". My proposal is: 1. cvsup 2. gmake 3. samba 4. kde-2* stuff 5. apache 6. mod_php 7. mod_ssl 8. gnome stuff 9. windowmaker This is what we should take care more carefully before release and start codefreeze for this and their dependencies along with sourcecode codefreeze to make sure all of them will compile/install/run properly. Please, add to this list anything that makes sense of "core packages". And, yes, I can help in this testing. I don't want to see "unfortunate accidents" in rock-stable system. -- NEVE-RIPE To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 1:34:36 2002 Delivered-To: freebsd-stable@freebsd.org Received: from david.siemens.de (david.siemens.de [192.35.17.14]) by hub.freebsd.org (Postfix) with ESMTP id 82C9837B400; Thu, 7 Feb 2002 01:34:32 -0800 (PST) Received: from mail3.siemens.de (mail3.siemens.de [139.25.208.14]) by david.siemens.de (8.11.6/8.11.6) with ESMTP id g179YV127085; Thu, 7 Feb 2002 10:34:31 +0100 (MET) Received: from mars.cert.siemens.de (ust.mchp.siemens.de [139.23.201.17]) by mail3.siemens.de (8.11.6/8.11.6) with ESMTP id g179YUk25016; Thu, 7 Feb 2002 10:34:30 +0100 (MET) Received: from reims.mchp.siemens.de (alaska [139.23.202.134]) by mars.cert.siemens.de (8.12.2/8.12.1/Siemens CERT [ $Revision: 1.22 ]) with ESMTP id g179YTLl038639; Thu, 7 Feb 2002 10:34:29 +0100 (CET) Received: from reims.mchp.siemens.de (localhost [127.0.0.1]) by reims.mchp.siemens.de (8.12.2/8.12.2/alaska [ $Revision: 1.10 ]) with ESMTP id g179YTb3060878; Thu, 7 Feb 2002 10:34:29 +0100 (CET) Received: (from ust@localhost) by reims.mchp.siemens.de (8.12.2/8.12.2/alaska [ $Revision: 1.2 ]) id g179YTjS060877; Thu, 7 Feb 2002 10:34:29 +0100 (CET) Date: Thu, 7 Feb 2002 10:34:29 +0100 (CET) Message-Id: <200202070934.g179YTjS060877@reims.mchp.siemens.de> To: FreeBSD-gnats-submit@freebsd.org Subject: Snapshot name when building a release From: Udo Schweigert Reply-To: Udo Schweigert Cc: freebsd-stable@freebsd.org X-send-pr-version: 3.113 X-GNATS-Notify: Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >Submitter-Id: current-users >Originator: Udo Schweigert >Organization: >Confidential: no >Synopsis: Snapshot name when building a release >Severity: non-critical >Priority: low >Category: conf >Class: sw-bug >Release: FreeBSD 4.5-STABLE i386 >Environment: System: FreeBSD alaska.cert.siemens.de 4.5-STABLE FreeBSD 4.5-STABLE #44: Tue Feb 5 19:05:02 CET 2002 ust@alaska.cert.siemens.de:/usr/obj/work/src/RELENG_4/sys/alaska i386 >Description: When building a snapshot release for RELENG_4 one gets it named as e.g. 4.4-20020206-STABLE. But RELENG_4 is now in 4.5-... >Fix: --- src/release/Makefile.orig Mon Jan 28 13:16:42 2002 +++ src/release/Makefile Thu Feb 7 10:27:30 2002 @@ -23,7 +23,7 @@ # # Automatic SNAP versioning: DATE != date +%Y%m%d -BASE = 4.4 +BASE = 4.5 BUILDNAME?=${BASE}-${DATE}-STABLE # #CHROOTDIR=/junk/release To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 1:38:38 2002 Delivered-To: freebsd-stable@freebsd.org Received: from omahpop4.omah.uswest.net (omahpop4.omah.uswest.net [204.26.64.4]) by hub.freebsd.org (Postfix) with SMTP id 6BAD037B417 for ; Thu, 7 Feb 2002 01:38:33 -0800 (PST) Received: (qmail 84503 invoked by alias); 7 Feb 2002 09:38:28 -0000 Delivered-To: fixup-freebsd-stable@freebsd.org@fixme Received: (qmail 84472 invoked by uid 0); 7 Feb 2002 09:38:27 -0000 Received: from omah6400gw2poolb124.omah.uswest.net (HELO kristen.shadowdale.net) (63.227.157.124) by omahpop4.omah.uswest.net with SMTP; 7 Feb 2002 09:38:27 -0000 Date: Thu, 7 Feb 2002 03:38:27 -0600 (CST) From: Bovine Unit #243 To: Undisclosed recipients: ; Subject: Re: DPT SmartRAID IV & >128GB drives In-Reply-To: <20020207083801.GB21863@hollin.btc.adaptec.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > I'll pass your question on to a DPT engineer. Should you be addressed as > ... Oops. My fault. My co-worker, looking over my shoulder at the monitor, pointed out *there* it is (all that 180GB) in the kernel output. That'll teach me to pull this sort of stunt at 3:00 in the morning. Sorry for all the hoopla. Going for a short R&R. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 2:24:35 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mail1.rambler.ru (mail1.rambler.ru [217.73.192.30]) by hub.freebsd.org (Postfix) with SMTP id 0D36D37B404 for ; Thu, 7 Feb 2002 02:24:30 -0800 (PST) Received: from 211.57.5.65 by rambler.ru with SMTP id AA08649 for freebsd-stable@freebsd.org; Thu, 7 Feb 2002 10:53:54 +0300 (MSK) From: äÏÂÒÏÖÅÌÁÔÅÌØ To: "" <> Subject: ËÁË ÌÀÄÉ ÚÁÒÁÂÁÔÙ×ÁÀÔ × ÉÎÔÅÒÎÅÔÅ??? Organization: ÎÅÔÕ ÔÁËÏÊ! :) Reply-To: S-AS@yandex.ru X-Mailer: X-Mailer Mime-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Date: Thu, 7 Feb 2002 10:56:22 +0300 Message-Id: <3C623292.AA08649@mail1.rambler.ru> Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG äÏÂÒÏÇÏ ×ÒÅÍÅÎÉ ÓÕÔÏË! åÓÌÉ ÷ÁÍ ÉÎÔÅÒÅÓÎÏ, ËÁË ÌÀÄÉ ÚÁÒÁÂÁÔÙ×ÁÀÔ ÄÅÎØÇÉ × ÓÅÔÉ ÉÎÔÅÒÎÅÔ É ×Ù ÓÁÍÉ ÈÏÔÉÔÅ ÉÈÚÁÒÁÂÁÔÙ×ÁÔØ... ôÏ $5 + ÎÅÍÎÏÇÏ ÕÓÅÒÄÉÑ = ÐÏÌÕÞÁÊÔÅ ÄÅÎØÇÉ ×ÓÀ ÖÉÚÎØ ðÏÄÒÏÂÎÏÓÔÉ: http://5dolors.non.ru ÉÌÉ http://5dolors.maza.ru/ úÁÒÅÇÉÓÔÒÉÒÏ×Á×ÛÉÓØ, ×Ù ÐÏÌÕÞÉÔÅ ÂÅÓÐÌÁÔÎÕÀ ËÏÎÓÕÌØÔÁÃÉÀ É ÎÁÂÏÒ ÐÒÏÇÒÁÍÍ ÎÅÏÂÈÏÄÉÍÙÈ ÄÌÑ ÒÁÂÏÔÙ!!! öÅÌÁÀ ÕÄÁÞÉ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 3:48:16 2002 Delivered-To: freebsd-stable@freebsd.org Received: from svr-ganmtc-appserv-mgmt.ncf.coxexpress.com (svr-ganmtc-appserv-mgmt.ncf.coxexpress.com [24.136.46.5]) by hub.freebsd.org (Postfix) with ESMTP id ACD1F37B416; Thu, 7 Feb 2002 03:48:10 -0800 (PST) Received: from darkstar.doublethink.cx (cpe-oca-24-136-59-202-cmcpe.ncf.coxexpress.com [24.136.59.202]) by svr-ganmtc-appserv-mgmt.ncf.coxexpress.com (8.11.4/8.11.4) with ESMTP id g17Bm0l10106; Thu, 7 Feb 2002 06:48:03 -0500 Received: by darkstar.doublethink.cx (Postfix, from userid 1000) id 81CDF2B98; Thu, 7 Feb 2002 06:48:00 -0500 (EST) Date: Thu, 7 Feb 2002 06:48:00 -0500 From: Chris Faulhaber To: Jason Cc: freebsd-questions@freebsd.org Subject: Re: compile error Message-ID: <20020207114800.GA43572@darkstar.doublethink.cx> References: <023501c1af9b$7ce52bf0$b958a8c0@JASON> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="pWyiEgJYm5f9v55/" Content-Disposition: inline In-Reply-To: <023501c1af9b$7ce52bf0$b958a8c0@JASON> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --pWyiEgJYm5f9v55/ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Thu, Feb 07, 2002 at 01:51:28PM +0800, Jason wrote: > Hello, >=20 > I'm trying to compile my kernel. Doing "make all" gives me this error. = Please help. I'm using FreeBSD stable 4.5. >=20 > In file included from linux_sysent.c:14: > linux_proto.h:57: syntax error before `linux_time_t' > linux_proto.h:57: `linux_time_t' undeclared here (not in a function) > linux_proto.h:57: syntax error before `)' See the 20011110 /usr/src/UPDATING entry. --=20 Chris D. Faulhaber - jedgar@fxp.org - jedgar@FreeBSD.org -------------------------------------------------------- FreeBSD: The Power To Serve - http://www.FreeBSD.org --pWyiEgJYm5f9v55/ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: FreeBSD: The Power To Serve iEYEARECAAYFAjxiaXAACgkQObaG4P6BelDOTgCfTFm+H76tlAEfqz7NqLmaDDug h2AAn3u8wWalhfoyFTRniTqxpzYLgHQ+ =c8N/ -----END PGP SIGNATURE----- --pWyiEgJYm5f9v55/-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 5:44:58 2002 Delivered-To: freebsd-stable@freebsd.org Received: from keryx.evtek.fi (keryx.evtek.fi [195.148.144.8]) by hub.freebsd.org (Postfix) with ESMTP id D58DA37B478 for ; Thu, 7 Feb 2002 05:44:36 -0800 (PST) Received: (from root@localhost) by keryx.evtek.fi (8.11.4/8.11.0) id g17Dhni32726 for freebsd-stable@freebsd.org; Thu, 7 Feb 2002 15:43:49 +0200 Received: from tamagoch.evtek.fi (IDENT:root@tamagoch.evtek.fi [195.148.144.1]) by keryx.evtek.fi (8.11.4/8.11.0) with ESMTP id g17DhlP32648 for ; Thu, 7 Feb 2002 15:43:47 +0200 Received: from southcross.skynet.org (cgi.evtek.fi [195.148.144.52]) by tamagoch.evtek.fi (8.11.6/8.11.2) with ESMTP id g17Dj9i32690 for ; Thu, 7 Feb 2002 15:45:09 +0200 Received: by southcross.skynet.org (Postfix, from userid 1001) id 48AC07520; Thu, 7 Feb 2002 15:44:29 +0100 (CET) Date: Thu, 7 Feb 2002 15:44:28 +0100 From: Paolo Pisati To: FreeBSD_Stable Subject: ftp_proxy and http_proxy don't work Message-ID: <20020207154428.A43448@southcross.skynet.org> Mime-Version: 1.0 X-scanner: scanned by Inflex 1.0.10 - (http://pldaniels.com/inflex/) Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i X-Useless-Header: Look ma, it's a # sign! X-Operating-System: FreeBSD southcross.skynet.org 4.5-STABLE FreeBSD 4.5-STABLE Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG My network is behind an http/ftp proxy server, that's why i set these 2 options in /etc/make.conf but it seems that the fetch program refuse to use it, any idea? thanks -- Paolo Visit the Italian FreeBSD User Group Site: www.gufi.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 6: 1:47 2002 Delivered-To: freebsd-stable@freebsd.org Received: from sirene.sappho-net.de (ns2.nxe.de [212.42.225.2]) by hub.freebsd.org (Postfix) with ESMTP id A6E4437B41E for ; Thu, 7 Feb 2002 06:01:39 -0800 (PST) Received: by sirene.sappho-net.de Microsoft SMTPSVC(5.5.8.11.1/nora-20010325) for freebsd-stable@freebsd.org (envelope-from nora) id g17E1c220288; Thu, 7 Feb 2002 15:01:38 +0100 (CET) Apparently-To: freebsd-stable@freebsd.org Date: Thu, 7 Feb 2002 15:01:38 +0100 From: Nora Etukudo To: FreeBSD_Stable Subject: Re: ftp_proxy and http_proxy don't work Message-ID: <20020207150138.A19735@sirene.sappho-net.de> References: <20020207154428.A43448@southcross.skynet.org> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-15 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020207154428.A43448@southcross.skynet.org>; from flag@libero.it on Thu, Feb 07, 2002 at 03:44:28PM +0100 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, Feb 07, 2002 at 03:44:28PM +0100, Paolo Pisati wrote: > My network is behind an http/ftp proxy server, that's why i set these 2 > options in /etc/make.conf but it seems that the fetch program refuse > to use it, any idea? Did you try with 'http_proxy' setting only? I've a Squid-Proxy here and it works not, if I set 'ftp_proxy' too. With 'http_proxy' only, the 'fetch' works for both 'ftp://'- and 'http://'- urls. Don't ask me, why. Liebe Grüße, Nora. -- nora@sappho-net.de Lesbian Computer Networks, Finland http://www.sappho.net/ Web for Women (von Frauen, für Frauen) http://www.w4w.net/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 6:13:33 2002 Delivered-To: freebsd-stable@freebsd.org Received: from firehouse.net (dsl-64-130-18-61.telocity.com [64.130.18.61]) by hub.freebsd.org (Postfix) with SMTP id 074CC37B421 for ; Thu, 7 Feb 2002 06:13:30 -0800 (PST) Received: (qmail 46674 invoked by uid 85); 7 Feb 2002 14:13:28 -0000 Date: Thu, 7 Feb 2002 09:13:26 -0500 From: Alan Clegg To: freebsd-stable@freebsd.org Subject: HTTP_PROXY from /etc/make.conf? Message-ID: <20020207091326.A46014@shell.wetworks.org> References: <20020207154428.A43448@southcross.skynet.org> <20020207150138.A19735@sirene.sappho-net.de> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="+HP7ph2BbKc20aGI" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020207150138.A19735@sirene.sappho-net.de>; from nora@sappho-net.de on Thu, Feb 07, 2002 at 03:01:38PM +0100 X-Virus-Scanned: by AMaViS perl-11 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --+HP7ph2BbKc20aGI Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Unless the network is lying to me again, Nora Etukudo said:=20 > I've a Squid-Proxy here and it works not, if I set 'ftp_proxy' too. With > 'http_proxy' only, the 'fetch' works for both 'ftp://'- and 'http://'- ur= ls. As a followup to this, does anyone think that it might be feasable for the ports and/or system make files to set HTTP_PROXY from /etc/make.conf? I have a number of systems on which this would allow me to 'fire-and-forget' when doing updates... ;-) AlanC --+HP7ph2BbKc20aGI Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8YouGyJP8xSfQVdsRAuL3AKDrMpY+Jrxxnr1vHGjXEWiIObUBFwCfRDeI Zz1LS9ZuTVsd7sCgf2GpfnQ= =nW3a -----END PGP SIGNATURE----- --+HP7ph2BbKc20aGI-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 6:19:13 2002 Delivered-To: freebsd-stable@freebsd.org Received: from gs166.sp.cs.cmu.edu (GS166.SP.CS.CMU.EDU [128.2.205.169]) by hub.freebsd.org (Postfix) with SMTP id 872C837B417 for ; Thu, 7 Feb 2002 06:19:07 -0800 (PST) To: Eugene Grosbein Cc: stable@freebsd.org Subject: Re: ipfw limit option References: <20020207154529.A92095@svzserv.kemerovo.su> From: Dan Pelleg Date: 07 Feb 2002 09:19:00 -0500 In-Reply-To: <20020207154529.A92095@svzserv.kemerovo.su> Message-ID: Lines: 50 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Eugene Grosbein writes: > Hi! > > I'm trying to utilize ipfw limit option with 4.5-STABLE. > Till now I had stateless ipfw configuration that worked fine. > > Now I need to limit one of my TCP services with only 5 sessions > per IP. The service itself has global limit of 50 simultaneous > connections but cannot limit the number of connections per IP. > And it is abused. > > I have following rules for the service bound to TCP port 8888: > > $fwcmd add 60130 pipe 3 tcp from $my_ip 8888 to any # for traffic shaping > $fwcmd add 60135 allow tcp from any to $my_ip 8888 > > Now I changed rule 60135 to > $fwcmd add 60135 allow tcp from any to $my_ip 8888 limit src-addr 5 > > This work basically, but: > > 1. Sometimes I see 8 connections per 1 ip, 6 are ESTABLESHED and > 2 are CLOSE_WAIT. That does not bothers me too much but it shows: > that code is not very exact. > > 2. The kernel fills my logs and console with TONS of messages: > > Feb 7 15:11:32 www /kernel: OUCH! cannot remove rule, count 2 > Feb 7 15:11:32 www /kernel: drop session, too many entries > Feb 7 15:11:32 www last message repeated 3 times > Feb 7 15:11:33 www /kernel: OUCH! cannot remove rule, count 2 > Feb 7 15:11:33 www /kernel: drop session, too many entries > Feb 7 15:11:34 www last message repeated 80 times > > And so on. That's not what I expect to receive. How can 'drop session' > messages be silenced? And what do 'OUCH!' messages mean? > > Eugene Grosbein > See kern/32600. Unfortunately, the provided patch doesn't apply cleanly anymore (bitrot). I lost contact with the commiter ever since I posted the PR in early December. I'll try to post an updated patch in a few days. http://www.FreeBSD.org/cgi/query-pr.cgi?pr=32600 -- Dan Pelleg To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 7:55:27 2002 Delivered-To: freebsd-stable@freebsd.org Received: from shikima.mine.nu (pc1-card4-0-cust77.cdf.cable.ntl.com [62.252.49.77]) by hub.freebsd.org (Postfix) with ESMTP id 3CFAE37B417 for ; Thu, 7 Feb 2002 07:55:19 -0800 (PST) Received: from rasputin by shikima.mine.nu with local (Exim 3.33 #1) id 16YqtF-00014g-00 for stable@freebsd.org; Thu, 07 Feb 2002 15:55:13 +0000 Date: Thu, 7 Feb 2002 15:55:13 +0000 From: Rasputin To: stable@freebsd.org Subject: rasputin@submonkey.net: Re: HTTP_PROXY from /etc/make.conf? Message-ID: <20020207155513.A4117@shikima.mine.nu> Reply-To: Rasputin Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Date: Thu, 7 Feb 2002 15:54:33 +0000 From: Rasputin To: Alan Clegg Subject: Re: HTTP_PROXY from /etc/make.conf? Reply-To: Rasputin * Alan Clegg [020207 14:15]: > Unless the network is lying to me again, Nora Etukudo said: > > > I've a Squid-Proxy here and it works not, if I set 'ftp_proxy' too. With > > 'http_proxy' only, the 'fetch' works for both 'ftp://'- and 'http://'- urls. > > As a followup to this, does anyone think that it might be feasable for > the ports and/or system make files to set HTTP_PROXY from /etc/make.conf? > > I have a number of systems on which this would allow me to 'fire-and-forget' > when doing updates... ;-) If you set it in /etc/profile, fetch will use it. Either that or my cablemodem can do 2Mb/sec all of a sudden. Incidentally, squid is a http_proxy, not an ftp_proxy - fetch knows how to tunnel ftp over http (which squid supports by default), if its given a http_proxy URL. Mozilla/Netscape groks this too (which is why you set ftp proxy separately in its preferences). That's why it breaks if you try setting ftp_proxy. -- Know thyself. If you need help, call the C.I.A. Rasputin :: Jack of All Trades - Master of Nuns :: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 8: 0:19 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mail.gmx.net (mail.gmx.net [213.165.64.20]) by hub.freebsd.org (Postfix) with SMTP id BC7D937B41A for ; Thu, 7 Feb 2002 08:00:11 -0800 (PST) Received: (qmail 32098 invoked by uid 0); 7 Feb 2002 16:00:06 -0000 Received: from pd9003287.dip.t-dialin.net (HELO gmx.net) (217.0.50.135) by mail.gmx.net (mp015-rz3) with SMTP; 7 Feb 2002 16:00:06 -0000 Message-ID: <3C62A499.2030707@gmx.net> Date: Thu, 07 Feb 2002 17:00:25 +0100 From: Michael Nottebrock User-Agent: Mozilla/5.0 (X11; U; Linux i386; en-US; rv:0.9.8) Gecko/20020204 X-Accept-Language: en-us MIME-Version: 1.0 To: Paolo Pisati Cc: FreeBSD_Stable Subject: Re: ftp_proxy and http_proxy don't work References: <20020207154428.A43448@southcross.skynet.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Paolo Pisati wrote: > My network is behind an http/ftp proxy server, that's why i set > these 2 options in /etc/make.conf but it seems that the fetch > program refuse to use it, any idea? This really is a bit of a documentation bug, since the examples in /etc/defaults/make.conf are misleading. Use FETCH_ENV= HTTP_PROXY=http://192.168.8.1:3128 in order to have fetch utilize a http-proxy running on 192.168.8.1, port 3128 for example. If you want fetch to use your http-proxy for ftp-tranfers, too, you don't need to specify FTP_PROXY, since fetch defaults to use a given http-proxy for ftp. If you want to use an actual ftp-proxy, use a line like FETCH_ENV= HTTP_PROXY=http://192.168.8.1:3128 \\ FTP_PROXY=10.0.0.1:21 or for a different http-proxy for ftp-transfers use something like FETCH_ENV= HTTP_PROXY=http://192.168.8.1:3128 \\ FTP_PROXY=http://10.0.0.1:3128 (remove line breaks and \\'s) -- Michael Nottebrock To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 8: 4:37 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mail.gmx.net (mail.gmx.net [213.165.64.20]) by hub.freebsd.org (Postfix) with SMTP id 3D53237B404 for ; Thu, 7 Feb 2002 08:04:32 -0800 (PST) Received: (qmail 19573 invoked by uid 0); 7 Feb 2002 16:04:31 -0000 Received: from pd9003287.dip.t-dialin.net (HELO gmx.net) (217.0.50.135) by mail.gmx.net (mp015-rz3) with SMTP; 7 Feb 2002 16:04:31 -0000 Message-ID: <3C62A5A1.9070508@gmx.net> Date: Thu, 07 Feb 2002 17:04:49 +0100 From: Michael Nottebrock User-Agent: Mozilla/5.0 (X11; U; Linux i386; en-US; rv:0.9.8) Gecko/20020204 X-Accept-Language: en-us MIME-Version: 1.0 To: Nora Etukudo Cc: FreeBSD_Stable Subject: Re: ftp_proxy and http_proxy don't work References: <20020207154428.A43448@southcross.skynet.org> <20020207150138.A19735@sirene.sappho-net.de> Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Nora Etukudo wrote: > On Thu, Feb 07, 2002 at 03:44:28PM +0100, Paolo Pisati wrote: > > >> My network is behind an http/ftp proxy server, that's why i set >> these 2 options in /etc/make.conf but it seems that the fetch >> program refuse to use it, any idea? >> > > Did you try with 'http_proxy' setting only? > > I've a Squid-Proxy here and it works not, if I set 'ftp_proxy' too. > With 'http_proxy' only, the 'fetch' works for both 'ftp://'- and > 'http://'-urls. > > Don't ask me, why. It is expected behaviour. If you want fetch to use a http-proxy (instead of a _real_ ftp-proxy) for ftp-fetchting, you need to feed it a URL like 'http://proxyhost:3128' for ftp_proxy, if you just give it a 'proxyhost', it expects a ftp-proxy. Normally one doesn't need to specify both http_proxy and ftp_proxy, since fetch defaults to use the proxy given in http_proxy for http and ftp. You could set ftp_proxy to something like 'http://proxyhost:3128' if you wanted to proxy ftp-transfers only, or to do ftp-transfers via a different http-proxy than http-transfers, though. -- Michael Nottebrock To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 8: 5:43 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mao.stokely.org (mao.stokely.org [65.84.64.228]) by hub.freebsd.org (Postfix) with ESMTP id 76C3237B41F for ; Thu, 7 Feb 2002 08:05:37 -0800 (PST) Received: by mao.stokely.org (Postfix, from userid 2074) id 4A0F54B65D; Thu, 7 Feb 2002 08:05:36 -0800 (PST) Date: Thu, 7 Feb 2002 08:05:36 -0800 From: Murray Stokely To: Nevermind Cc: Wilko Bulte , JJ Behrens , Rossam Souza Silva , freebsd-stable@FreeBSD.ORG Subject: Re: KDE mixup: was samba package Message-ID: <20020207160536.GU14152@freebsdmall.com> References: <20020204122425.A27402@alicia.nttmcl.com> <20020205123552.A634@alicia.nttmcl.com> <20020206090420.GB61267@nevermind.kiev.ua> <20020206205745.E11849@freebie.xs4all.nl> <20020207085419.GA69433@nevermind.kiev.ua> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020207085419.GA69433@nevermind.kiev.ua> User-Agent: Mutt/1.3.25i X-GPG-Key-ID: 1024D/0E451F7D X-GPG-Key-Fingerprint: E2CA 411D DD44 53FD BB4B 3CB5 B4D7 10A2 0E45 1F7D Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, Feb 07, 2002 at 10:54:20AM +0200, Nevermind wrote: > > So, I take it you will volunteer to check the 6000+ ports & packages? > Wilko, I mean that we should make a list which should be like "core > packages". My proposal is: The list would be three times this long if you just include the packages that sysinstall looks for during installation (the different window managers available from the Desktop menu, etc..). This is a start though. We also need to make a distinction between disc 1 material, and material that should just appear on ONE of the CDs, but maybe not the first. Can you follow up with portmgr@ and work with them to build a more comprehensive list? src/release/scripts/print-cdrom-packages.sh is a good starting point. > This is what we should take care more carefully before release and start > codefreeze for this and their dependencies along with sourcecode > codefreeze to make sure all of them will compile/install/run properly. > Please, add to this list anything that makes sense of "core packages". Yes. There will be a longer "freeze" for ports next time around. Portmgr@ will make an announcement about that once they decide how long it should be. - Murray To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 8:20:21 2002 Delivered-To: freebsd-stable@freebsd.org Received: from ptavv.es.net (ptavv.es.net [198.128.4.29]) by hub.freebsd.org (Postfix) with ESMTP id 2C62337B41C; Thu, 7 Feb 2002 08:20:06 -0800 (PST) Received: from ptavv (localhost [127.0.0.1]) by ptavv.es.net (Postfix) with ESMTP id B3CE45D13; Thu, 7 Feb 2002 08:20:05 -0800 (PST) To: John Merryweather Cooper Cc: Jason , freebsd-questions@freebsd.org, freebsd-stable@freebsd.org Subject: Re: compile error In-reply-to: Your message of "Wed, 06 Feb 2002 22:46:12 PST." <20020206224612.E23198@johncoop.MSHOME> Date: Thu, 07 Feb 2002 08:20:05 -0800 From: "Kevin Oberman" Message-Id: <20020207162005.B3CE45D13@ptavv.es.net> Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Date: Wed, 6 Feb 2002 22:46:12 -0800 > From: John Merryweather Cooper > Sender: owner-freebsd-questions@FreeBSD.ORG > > Follow the instructions in the documentation for building a kernel. > 'make all' is NOT the way to do it. :) > > Generally, one builds a "world" to make sure that "world" stays in sync > with the kernel (or else very bad things may happen). Then (and only > then) does a kernel get built. > > Assuming you have a working kernel configuration file in /sys/i386/conf > with "SOME_NAME," the safe-and-sane build sequence, usually looks like > (from memory): > > # cd /usr/src > # make buildworld > # make buildkernel KERNCONF=SOME_NAME > # make installkernel KERNCONF=SOME_NAME > # make installworld > > You may need to reboot into single-user mode to successfully install > (that will depend on your configuration, etc.) And the order may have > changed (read the documentation); and there are shortcuts for the > brave-or-foolhardy (which I won't discuss here). > > But don't trust me, read the doc. :) Yes, you really want to reboot to single-user mode to installworld, even though the installworld works fine in multi-user mode. The problems is that you are installing a new userland while running the old kernel. The next time you re-boot it is possible that the kernel won't work. You can boot with kernel.old, but that leaves you with a partly functioning system since the kernel and userland are not only out of sync, but in the "wrong" way, and it's virtually impossible to "uninstallworld". You usually have to re-install! That all said, many people do the entire installation without a reboot and do it remotely with no console access. (I've done it and probably will again.) It USUALLY works, but when it fails, you are in VERY deep weeds! R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Feb 7 9:52:46 2002 Delivered-To: freebsd-stable@freebsd.org Received: from srv1.hug.cx (137.128.catv.tbwil.ch [213.196.128.137]) by hub.freebsd.org (Postfix) with ESMTP id 42CB837B41D for ; Thu, 7 Feb 2002 09:52:36 -0800 (PST) Received: by srv1.hug.cx (This is not sendmail :-), from userid 65) id 5078C30056; Thu, 7 Feb 2002 18:52:29 +0100 (CET) Received: from troja (dhcp-1-26.hug.cx [172.17.1.26]) by srv1.hug.cx (This is not sendmail :-)) with SMTP id 50AB55C09F for ; Thu, 7 Feb 2002 18:52:26 +0100 (CET) Message-ID: <028a01c1b000$2594c580$1a0111ac@troja> From: "Philipp Hug" To: Subject: Logitech iFeel mouse with FreeBSD 4.5 - GENERIC Date: Thu, 7 Feb 2002 18:52:00 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-AntiVirus: scanned for viruses by AMaViS 0.2.1 (http://amavis.org/) Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi all, I'm getting the following messages, when I start with the mouse attached: usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2 uhub3: 4 ports with 4 removable, self powered --> system freezed for about 20s ums0: Logitech, Inc. iFeel Mouse, rev 1.00/1.00, addr 3, iclass 3/1 device_probe_and_attach: ums0 attach returned 6 ugen0: Logitech, Inc. iFeel Mouse, rev 1.00/1.00, addr 3 --> system freezed for about 20s ugen0: setting configuration index 0 failed device_probe_and_attach: ugen0 attach returned 6 This is a fresh installation of 4.5 RELEASE. (I get the same with the installation cd) has anything been fixed? should I update to stable? - philipp --- output from usbdevs -v Controller /dev/usb0: addr 1: self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev 0x0100 port 1 powered port 2 powered port 3 powered Controller /dev/usb1: addr 1: self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev 0x0100 port 1 powered port 2 powered complete dmesg follows here: Rebooting... Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-RELEASE #0: Mon Jan 28 14:31:56 GMT 2002 murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) XP 1700+ (1471.92-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff AMD Features=0xc0480000<,AMIE,DSP,3DNow!> real memory = 1073676288 (1048512K bytes) avail memory = 1040375808 (1015992K bytes) Preloaded elf kernel "kernel" at 0xc0496000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 10 entries at 0xc00f7d90 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 dc0: port 0xd400-0xd47f mem 0xdffcfc00-0xdffcffff irq 10 at device 6.0 on pci0 dc0: Ethernet address: 00:c0:ca:17:ef:d0 miibus0: on dc0 dcphy0: on miibus0 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: (vendor=0x1102, dev=0x0002) at 8.0 irq 12 pci0: (vendor=0x1102, dev=0x7002) at 8.1 ohci0: mem 0xdffcd000-0xdffcdfff irq 11 at device 11.0 on pci0 usb0: OHCI version 1.0 usb0: on ohci0 usb0: USB revision 1.0 uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xdffce000-0xdffcefff irq 10 at device 11.1 on pci0 usb1: OHCI version 1.0 usb1: on ohci1 usb1: USB revision 1.0 uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: at 11.2 irq 5 atapci0: port 0xd800-0xd83f,0xdc00-0xdc03,0xe000-0xe007,0xe400-0xe403,0xe800-0xe807 mem 0xdffe0000-0xdfffffff irq 10 at device 12.0 on pci0 ata2: at 0xe800 on atapci0 ata3: at 0xe000 on atapci0 isab0: at device 17.0 on pci0 isa0: on isab0 atapci1: port 0xfc00-0xfc0f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata1: at 0x170 irq 15 on atapci1 uhci0: port 0xc400-0xc41f irq 12 at device 17.2 on pci0 usb2: on uhci0 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2 uhub3: 4 ports with 4 removable, self powered ums0: Logitech, Inc. iFeel Mouse, rev 1.00/1.00, addr 3, iclass 3/1 device_probe_and_attach: ums0 attach returned 6 ugen0: Logitech, Inc. iFeel Mouse, rev 1.00/1.00, addr 3 ugen0: setting configuration index 0 failed device_probe_and_attach: ugen0 attach returned 6 uhci1: port 0xc800-0xc81f irq 12 at device 17.3 on pci0 usb3: on uhci1 usb3: USB revision 1.0 uhub4: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhci2: port 0xcc00-0xcc1f irq 12 at device 17.4 on pci0 usb4: on uhci2 usb4: USB revision 1.0 uhub5: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5: 2 ports with 2 removable, self powered orm0: