Date: Mon, 27 Nov 2006 08:36:29 +0300 (MSK) From: Nguyen Tam Chinh <chinhngt@sectorb.msk.ru> To: Phan Quoc Cao <cao.phanquoc@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: Help Me! Message-ID: <20061127083413.C84198@it.hackers> In-Reply-To: <000001c711c8$33291410$6f00a8c0@lomcom> References: <000001c711c8$33291410$6f00a8c0@lomcom>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, Please try the 6.1 or 6.2-PRERELEASE. I doubt that the 6.0 does not support PerC 5/I driver. If you want 6.0, please copy the mfi.ko to /boot/kernel and load it as a kernel module as boot by adding to /boot/loader.conf something like: mfi_load="YES". Hope that this helps. On Mon, 27 Nov 2006, Phan Quoc Cao wrote: > I installed FreeBSD 6.0 on PowerEdge 2950, so if I retry to boot, but RAID > PerC 5/I card not detected hard disk drives. > > I had to use mfi.ko driver for PERC 5/I by Selected Load KLD thought floppy > included mfi.ko driver then the install process is normal, but after that I > reboot machine, the filsystem not received and announced the following: > > > Manual root filesystem specification: > > <fstype>:<device> Mount <device> using filesystem <fstype> > > e.g. ufs:/dev/da0s1a > > ? List valid disk boot devices > > <empty line> Abort manual input > > mountroot> > > Who anyone can help me? > > Thanks and best regards! > > > > > > > <http://609473.sigclick.mailinfo.com/sigclick/04020B02/05014E05/07014E04/422 > 26222.jpg> > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > ----- With best regards, | The Power to Serve Nguyen Tam Chinh | http://www.FreeBSD.org Loc: sp.cs.msu.su |
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061127083413.C84198>