Date: Sun, 18 Jun 2000 09:29:49 -0700 (PDT) From: Sean Eric Fagan <sef@kithrup.com> To: mobile@freebsd.org Subject: Re: Laptops are too much black magic :( Message-ID: <200006181629.JAA29942@kithrup.com> In-Reply-To: <200006180629.AAA47529.kithrup.freebsd.mobile@harmony.village.org> References: <200006180500.WAA23493@kithrup.com>
next in thread | previous in thread | raw e-mail | index | archive | help
In article <200006180629.AAA47529.kithrup.freebsd.mobile@harmony.village.org> you write: >I think there are two problems here. First, irq 11 isn't a good >interrupt for you. Well, given the strangeness in the ethernet >address, that should be fixed first. The 3com card uses IRQ 11. >: In particular, note the MAC address for the card: three different cards have >: presented the same MAC address; therefore, I'm fairly certain it's wrong :). > >Paul Saab just committed a fix that might help... I doubt it, but you >might give it a try. > >ed0 at port 0x240-0x25f irq 11 slot 0 on pccard0 >ed0: address 00:80:c8:8e:5c:55, type Linksys (16 bit) > >is what I get. Maybe it will help since it is a linksys related fix. I just tried it. It didn't help: ed0 at port 0x300-0x31f irq 11 slot 0 on pccard0 ed0: address 01:d1:ff:04:d1:ff, type NE2000 (16 bit) I tried changing the adress range: ed0 at port 0x240-0x25f irq 11 slot 0 on pccard0 ed0: address 01:d1:ff:04:d1:ff, type NE2000 (16 bit) and obviously it didn't help. Now, one obvious problem is: well, your DFE-650TX identifies itself as a "type Linksys"... and mine doesn't. I'm going to guess that is related to the problem. From looking at ed_get_Linksys(), it just gets some registers, and compares it to what the linksys should be. My assumption, then, is that... something is wrong about the I/O port addresses it's using. Unfortunately, my 3com card is using the same base address: ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 11 slot 0 on pccard0 and it works correctly. So I continue to be lost :(. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200006181629.JAA29942>