Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 29 Jan 2017 22:18:34 -0700 (MST)
From:      Warren Block <wblock@wonkity.com>
To:        David Christensen <dpchrist@holgerdanske.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: FreeBSD 11.0-RELEASE-p7 i386 system drive imaging and migration
Message-ID:  <alpine.BSF.2.20.1701292206450.71961@wonkity.com>
In-Reply-To: <516b147d-6faa-b9c0-1d8f-2313a0755211@holgerdanske.com>
References:  <df0c81d7-fd2b-852f-4007-5fb4b24100e0@holgerdanske.com> <alpine.BSF.2.20.1701290622500.13432@wonkity.com> <516b147d-6faa-b9c0-1d8f-2313a0755211@holgerdanske.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 29 Jan 2017, David Christensen wrote:

> On 01/29/17 05:27, Warren Block wrote:
>> On Sat, 28 Jan 2017, David Christensen wrote:
>> 
>>> What is the proper way to clone a FreeBSD system image from one drive
>>> to another?
>> 
>> On encrypted ZFS?  I'm not sure there is a brute-force way that is
>> trustworthy.  Using higher-level commands to recreate the partitions,
>> GELI encryption, and then zfs send | recv are certain safer and won't
>> duplicate supposedly unique IDs.
>
> STFW
>
> https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/backup-basics.html
>
> toor@freebsd:/root # gpart show
> =>      63  31277169  ada0  MBR  (15G)
>        63         1        - free -  (512B)
>        64  31277160     1  freebsd  [active]  (15G)
>  31277224         8        - free -  (4.0K)
>
> =>       0  31277160  ada0s1  BSD  (15G)
>         0   4194304       1  freebsd-zfs  (2.0G)
>   4194304   4194304       2  freebsd-swap  (2.0G)
>   8388608  22888544       4  freebsd-zfs  (11G)
>  31277152         8          - free -  (4.0K)
>
>
> It appears that my FreeBSD image lives within what Microsoft and Linux would 
> call a single MBR primary partition (FreeBSD "slice"?), and that FreeBSD 
> further subdivides that into boot, swap, and root sections (FreeBSD 
> "partitions"?).

Yes.  I think the 11.0 installer made the mistaken assumption that 
machines that boot from BIOS must (or should) use MBR/disklabel.

> STFW RTFM there is information scattered in many places.  Is there a concise 
> document that explains what is relevant for creating, cloning, migrating, 
> etc., FreeBSD 11 r7 system drives -- what the on-disk data structures are, 
> how to back up them and their contents, how to recreate the structures on a 
> blank drive, how to restore  contents, how to deal with size, identifier, 
> serial number, crypto key, etc., changes, etc.?

Not that I know of.  What you are talking about is a combination of 
numerous different systems. I talk about partitioning here:

http://www.wonkity.com/~wblock/docs/html/disksetup.html

But if you are using encryption, that means GELI (geli(8)).

>>> What is the proper way to move a HDD or SSD with a FreeBSD system
>>> image from one computer to another computer?
>> 
>> Provided the binaries have not been optimized for one CPU, just move the
>> drive.  Disk drive names can change, which is not a problem when labels
>> are used.
>
> It looks like I got lucky on device names.  Where are slice/ partition/ 
> filesystem labels documented, notably the strategies and procedures for using 
> them?

See glabel(8).

>> Ethernet interface names can change.  If there is only one
>> interface, use ifconfig_DEFAULT in /etc/rc.conf.
>
> Regarding the network interface, my /etc/rc.conf contains shell variable 
> assignments.  What am I to assign to 'ifconfig_DEFAULT'?

Usually, SYNCDHCP:

ifconfig_DEFAULT="SYNCDHP"

It functions the same as ifconfig_em0 or _re0 or whatever, but for all 
interfaces with no other settings.

> RTFM 'ifconfig_DEFAULT' I draw blank:
>
> toor@freebsd:/root # grep ifconfig_DEFAULT /etc/rc.conf /etc/defaults/rc.conf
> toor@freebsd:/root # man rc.conf | grep ifconfig_DEFAULT

setenv PAGER less
man rc.conf
Type
   /ifconfig_DEFAULT
and press Enter.


> The Xfce application issues appeared both when:
>
> 1.  The FreeBSD system drive image was copied to another drive and then 
> booted in the source machine.
>
> 2.  The FreeBSD system drive was booted in another machine.
>
>
> What is causing the Xfce issues?

No idea.  I have moved hard drives from one machine to another, and in 
fact wrote an installer that sets up FreeBSD to be used on a generic 
machine with Xfce.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.20.1701292206450.71961>