Date: Tue, 25 Jan 2011 00:13:29 +1000 From: Da Rock <freebsd-questions@herveybayaustralia.com.au> To: freebsd-questions@freebsd.org Subject: Re: Onboard SATA Controller of Intel DH55HC Motherboard (FreeBSD 7.3 & FreeBSD 8.1) Message-ID: <4D3D8909.7040408@herveybayaustralia.com.au> In-Reply-To: <AANLkTi=td78fz8ZH6iUxsNhryuSf-K=QGwQpA0H7hyjn@mail.gmail.com> References: <AANLkTi=8dzXoUXEjv792wSfwaOoxfCbzs7aGW5cT_pZh@mail.gmail.com> <201101241323.p0ODNJgx042895@mail.r-bonomi.com> <AANLkTi=td78fz8ZH6iUxsNhryuSf-K=QGwQpA0H7hyjn@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 01/25/11 00:01, Bahman Kahinpour wrote: > Do you mean that both traditional IDE drives and these new SATA drives > both begin with "ad" in FreeBSD? I am new to FreeBSD, I have just > migrated from Linux. In Linux, traditional IDE drives used to begin > with "hd" and these new SATA drives began with "sd" and recognized as > SCSI devices. I expected this new SATA drives to begin with "da" in > FreeBSD. Do you mean I am wrong and both IDE and SATA devices begin > with "ad"? > > I believe so, yes. I have several SATA systems running FreeBSD, as well as some ATA. Only difference is the numerical start- ad0 as opposed to ad4, but I believe that is mainboard bios dependent. > On 1/24/11, Robert Bonomi<bonomi@mail.r-bonomi.com> wrote: > >>> From owner-freebsd-questions@freebsd.org Mon Jan 24 05:48:21 2011 >>> Date: Mon, 24 Jan 2011 15:10:07 +0330 >>> From: Bahman Kahinpour<bahman.linux@gmail.com> >>> To: freebsd-questions@freebsd.org >>> Subject: Onboard SATA Controller of Intel DH55HC Motherboard (FreeBSD 7.3 >>> & >>> FreeBSD 8.1) >>> >>> Hello FreeBSD people all over the world, >>> >>> There is an onboard Intel SATA controller on Intel DH55HC motherboard. I >>> have tried FreeBSD version 7.3 and 8.1 on this motherboard, it recognizes >>> the SATA controller but recognizes the hard disk as IDE devices. How can >>> this happen? >>> >>> $ uname -a >>> FreeBSD mail.freebsdsystem.net 8.1-RELEASE FreeBSD 8.1-RELEASE #0: Sun >>> Jan 23 19:28:28 IRST 2011 >>> root@mail.freebsdsystem.net:/usr/obj/usr/src/sys/CUSTOM i386 >>> $ dmesg | grep SATA >>> atapci1:<Intel PCH SATA300 controller> port >>> 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem >>> 0xfe725000-0xfe7257ff irq 19 at device 31.2 on pci0 >>> ad8: 476940MB<WDC WD5000AADS-00S9B0 01.00A01> at ata4-master UDMA100 SATA >>> 3Gb/s >>> ad10: 476940MB<WDC WD5000AADS-00S9B0 01.00A01> at ata5-master UDMA100 >>> SATA 3Gb/s >>> ad12: 476940MB<WDC WD5000AADS-00S9B0 01.00A01> at ata6-master UDMA100 >>> SATA 3Gb/s >>> acd0: DVDR<SONY DVD RW DRU-870S/1.61> at ata7-master UDMA100 SATA 1.5Gb/s >>> $ >>> >>> I did everything to prevent the FreeBSD kernel from recognizing the hard >>> drives as IDE. I turned off all IDE emulation options in the BIOS. >>> >>> How can I fix that? >>> >> what are you -expecting- to see? ATA drives, either PATA or SATA _are_ >> IDE interface. the boot messages show they're being regocnises as SATA, >> at 3 gigabit/sec. Everything looks right to me. :) >> >> >> >> > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4D3D8909.7040408>