Date: Sat, 22 Jun 2002 09:50:01 +0800 From: =?gb2312?B?0e7TwtbH?= <yyzox@public.wh.hb.cn> To: freebsd-questions@FreeBSD.ORG Subject: Problem on installing FreeBSD 4.5-RELEASE Message-ID: <000001c2198f$200f3340$050710ac@heos.com>
next in thread | raw e-mail | index | archive | help
I have problems when installing FreeBSD 4.5-RELEASE.
My computer=A1=AFs hardware is shown below:=20
CPU: Celeron 400MHz=20
Chipset: VIA VT82C691 + VT82C586B=20
BIOS: Award (1998)=20
Hard Disk: Maxtor 4D040H2 (40GB IDE)=20
Memory: 2*128MB SDRAM=20
At first, the BIOS couldn't recognize the new Maxtor Disk. I upgraded it
to 2001,=20
and it worked. I planned to partition the disk as follow:=20
Primary Partition 1: 7.2GB, FAT32, (ad0s1), Windows XP Pro=20
Primary Partition 2: 4.0GB, UFS, ad0s3, FreeBSD
ad0s3a, 3840MB, mount as /
ad0s3b, 256MB, swap
Extended Partition: (ad0s2), Logical Disk 1 and 2: NTFS, Windows XP
Pro
I setup Windows XP first, and install System Commander 7.04 as the boot
manager.=20
During the installation of FreeBSD 4.5-RELEASE, when the system is
making the=20
/dev/ad0s3a, I see warning messages from virtual terminal 2:=20
Warning: Block size and bytes per inode restrict cylinders per group
to 89.=20
Warning: inode blocks/cyl group (171) >=3D data blocks (64) in last
cylinder=20
group. This implies 2048 sector(s) can=A1=AFt be allocated.=20
...=20
During the format process, I see following messages showing frequently:=20
ad0: WRITE command timeout tag=3D0 serv=3D0 - resetting=20
ata0: resetting devices ... done=20
After file system was made, the above messages still show intermittently
during
the file copy process. Finally, system shows something like this and
reboot:=20
Fatal trap 12: page fault while in kernel mode=20
fault virtual address =3D ...=20
fault code / supervisor write, page not present=20
instruction pointer =3D ...=20
stack pointer =3D ...=20
frame pointer =3D ...=20
code segment =3D ...=20
=3D ...=20
processor eflags =3D ...=20
current process =3D ...=20
interrupt mask =3D ...=20
trap number =3D 12=20
panic: page fault=20
Or something like this:=20
panic: syncing disk ...=20
After several times of defeat, I try to install FreeBSD 3.4-STABLE
instead, which uses=20
wd driver for hard disks. Except the following warning message, nothing
went wrong
-- the installation has been completely successful:=20
Warning: the last 2048 sector(s) can=A1=AFt be allocated.=20
What=A1=AFs the problem with FreeBSD 4.5-RELEASE?=20
yyzox
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001c2198f$200f3340$050710ac>