Date: Tue, 17 Jun 1997 23:10:09 +0200 (CEST) From: Blaz Zupan <blaz@amis.net> To: freebsd-questions@freebsd.org Subject: WangDAT 3200 not working Message-ID: <199706172110.XAA14747@relay.amis.net>
next in thread | raw e-mail | index | archive | help
Is anybody using a WangDAT 3200 DAT streamer with success? Whenever I try to write to a tape I get errors like: st0(ahc0:1:0): HARDWARE FAILURE asc:15,1 Mechanical positioning error and st0(ahc0:1:0): MEDIUM ERROR info:80 asc:c,0 Write error sks:80,1 I tried two different tapes (both can't be defect, one was new, the other was a used one) and both experience the same problem. I double and triple checked SCSI termination but still no go. The DAT is connected to an Adaptec 2940UW, I'm running a 2.2.2 kernel. The relevant messages are: ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 7 on pci0:11 ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs ahc0:A:1: refuses WIDE negotiation. Using 8bit transfers (ahc0:1:0): "WangDAT Model 3200 02.2" type 1 removable SCSI 2 st0(ahc0:1:0): Sequential-Access density code 0x13, drive empty ahc0:A:6: refuses WIDE negotiation. Using 8bit transfers (ahc0:6:0): "QUANTUM FIREBALL_TM3200S 300X" type 0 fixed SCSI 2 sd0(ahc0:6:0): Direct-Access 3067MB (6281856 512 byte sectors) Any ideas? Please include me in your replies as I don't subscribe to this list (there are way too many FreeBSD mailing lists to be subscribed to all of them :). -- Blaz Zupan, blaz@amis.net, http://www.amis.net/staff/blaz Medinet d.o.o., Linhartova 21, 2000 Maribor, Slovenia
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199706172110.XAA14747>