Date: Sat, 23 Apr 2011 13:46:25 +0700 From: Erich Dollansky <erichfreebsdlist@ovitrap.com> To: Doug Hardie <bc979@lafn.org> Cc: freebsd-questions@freebsd.org Subject: Re: Help with Booting Message-ID: <201104231346.25403.erichfreebsdlist@ovitrap.com> In-Reply-To: <2E3ADE2E-131D-488D-B8E3-2CA199CA9B3D@lafn.org> References: <C249647E-1186-4AC2-8028-2C09326F77F0@lafn.org> <201104231128.09953.erichfreebsdlist@ovitrap.com> <2E3ADE2E-131D-488D-B8E3-2CA199CA9B3D@lafn.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, On Saturday 23 April 2011 12:57:32 Doug Hardie wrote: > > On 22 April 2011, at 21:28, Erich Dollansky wrote: > > > It looks to me that not even the loader loads. Is this true? > > > I am not sure. The last message is the timestamp from the original distribution build. Then is a line with just the '/' character that should spin a bit. It doesn't. > > By playing around a bit I got it a bit farther. I took one of the raid disks and mounted it in a different system. I did an install on it but without changing the label other than to use all the disk. Then I put it back in the production system and booted. It appears to retain the RAID characteristics, but all I get is a '-' at the top left of the screen. I then plugged in the memstick image and booted from that. Right after the last DOS window I pressed F10 which took me to a FreeBSD boot line with the default pointing to ad0. I used 0:ad(4,a)/boot/loader and it went on to the same point as before, but then a bit farther. I now see: > this is all to weird for me. Could you install a disk not using the raid hardware? It would then exclude the motherboard as the cause. Erich > Loading /boot/defaults/loader.conf > /boot/kernel/kernel text=0x8ffac1 | > > The '|' normally spins a couple of times and moves on to the next section. However, its hung there now. > > > > > > On Saturday 23 April 2011 05:38:41 Doug Hardie wrote: > >> I have an AMD based system that is driving me nuts. I am trying to install 8.2 on it but can't get past the first boot. I had a system up and running on it before, but I had to remove a drive and do the install on another computer. That worked, but now I need to use the built in RAID hardware. As best as I can tell I am going to have to install on the the actual hardware. Motherboard is an Arima NM46X. The machine appears to be about 6 years old. > >> > >> I have tried to boot the install disk, the live filesystem disk, and the memstick image for FreeBSD 7.0 through 8.2. All of them do exactly the same thing: > >> > >> Bootstart starts. > >> > >> BTX loader lists the drives and memory > >> > >> FreeBSD bootstrap loader version 1.1 starts. I get the build date and then a new line with just a '/' on it. It never begins to spin. No additional I/O occurs with the boot device. > >> > >> The memstick and CDs are good. They boot just fine on another computer, just not this one. I have had to work around CD issues in the past, but I thought the memstick would work if the BIOS would recognize it and boot from it. It recognizes it and tries to boot. I need some ideas here as the RAID is essential for this application. Thanks, > >> > >> > >> _______________________________________________ > >> freebsd-questions@freebsd.org mailing list > >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions > >> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > >> > >> > > > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201104231346.25403.erichfreebsdlist>