Date: Sat, 2 May 2020 13:08:22 +0200 From: "Christoph P.U. Kukulies" <kuku@kukulies.org> To: freebsd-questions@freebsd.org Subject: Re: sym0 weirdness Message-ID: <4f1729b9-5c8c-26d1-8a64-e7c17eecffb2@kukulies.org> In-Reply-To: <373ced34-1fe5-c385-e2c4-20cc6f46d9f0@kukulies.org> References: <373ced34-1fe5-c385-e2c4-20cc6f46d9f0@kukulies.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Seems that HTML coded Email doesn't get through. Should have known that :) Here is the content: Am 02.05.2020 um 10:27 schrieb Christoph P.U. Kukulies: > > I'm trying to connect and detect some SCSI device on an externanally > connected SCSI bus. > > Controller is a Symbios PCI card 2520. > > With the cable connected and one device at the end of the bus (1,5m > cable, internally terminated by the SCSI2D controller card), I'm > always getting camcontrol rescan all to hang, üroducing lots of errers > then in the dmesg. > > This is the picture right after system boot: > > sym0: <810> mem 0xc0000000-0xc000000f irq 20 at device 5.0 on pci4 > sym0: No NVRAM, ID 7, Fast-10, SE, parity checking > CACHE TEST FAILED: reg dstat-sstat2 readback ffffffff. > sym0: CACHE INCORRECTLY CONFIGURED. > device_attach: sym0 attach returned 6 > > > Now, when I use camcontrol to detect my SCSI devices connected to > sym0, all I get listed are my hard disks: > > > # camcontrol devlist > <KINGSTON SA400S37240G SBFKB1D1> at scbus0 target 0 lun 0 (ada0,pass0) > <WDC WD10EADS-22M2B0 01.00A01> at scbus1 target 0 lun 0 (ada1,pass1) > <Samsung SSD 840 EVO 120GB EXT0AB0Q> at scbus2 target 0 lun 0 > (ada2,pass2) > <SAMSUNG HD502HJ 1AJ100E4> at scbus3 target 0 lun 0 (ada3,pass3) > <Verbatim STORE N GO 1.00> at scbus7 target 0 lun 0 (pass4,da0) > # camcontrol devlist -b 1 > scbus0 on ahcich0 bus 0 > scbus1 on ahcich1 bus 0 > scbus2 on ahcich2 bus 0 > scbus3 on ahcich3 bus 0 > scbus4 on ahcich4 bus 0 > scbus5 on ahcich5 bus 0 > scbus6 on ata1 bus 0 > scbus7 on umass-sim0 bus 0 > scbus-1 on xpt0 bus 0 > > Clueless. > > > -- > > Christoph > Am 02.05.2020 um 10:27 schrieb Christoph P.U. Kukulies: > _______________________________________________ > freebsd-questions@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4f1729b9-5c8c-26d1-8a64-e7c17eecffb2>