Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 16 Jan 2008 16:29:41 -0600
From:      Derek Ragona <derek@computinginnovations.com>
To:        "Joseph Yeager" <joeyea323@gmail.com>, freebsd-questions@freebsd.org
Subject:   Re: FreeBSD 6.2 Frequent Lockups
Message-ID:  <6.0.0.22.2.20080116162638.02528c68@mail.computinginnovations.com>
In-Reply-To: <44f12db00801160837w4e8987e2jb87d7d60c2704788@mail.gmail.co m>
References:  <44f12db00801160837w4e8987e2jb87d7d60c2704788@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
At 10:37 AM 1/16/2008, Joseph Yeager wrote:
>Hello,
>      I'm experiencing daily lockups on a FreeBSD 6.2 machine thats currently
>being used as a gateway for a local church school.  I have installed and/or
>configured the following services which are running on it right now: Quagga
>(only using the Zebra daemon), DHCP (via the isc-dhcp3-server port), BIND,
>and PF.  Everything runs as expected except for the fact that the machine
>will completely freeze (console included) quite often.  Its recently gotten
>as bad as freezing every 3-5 hours.  I don't have any custom cron jobs
>running and the only job I see that operates at that frequency is daily
>maintenance.  Thinking it could be a heat problem originating from sitting
>on top of a switch, I put a few blocks under and now it runs a good bit
>cooler.  Last night, I had the windows open and it never got hotter then
>luke warm and I witnessed, first hand, it completely freeze for no apparent
>reason.  Despite that seemingly pointing to it NOT being a heat problem,
>I'll be moving it to a shelf by itself.  I will also be swapping out the RAM
>in a few hours when I get up there to see if that is the problem, but I
>still have a feeling (after reading other similar problems like this) that
>that may not be the answer.  I have a similar setup running at my home which
>uses the exact same motherboard but different RAM and HD.  The only
>difference on my home router is that I have split horizon DNS setup for my
>domain and am using IPFW as opposed to PF.  My home router has been rock
>solid every since I got it (several months ago) and my email and webserver,
>which both run FreeBSD 6.2, have never been down except for extended power
>outages.  I will update you on how the RAM swap goes, but if there are any
>other suggestions you have I would greatly appreciate it.
>
>Thanks,
>Joe

Lockups are usually hardware related.  You should run diagnostics on all 
your motherboard, RAM, drives, and NIC's.  Check that your system BIOS 
settings are correct, and you are not "over-clocking" your CPU or RAM.

I would run the generic kernel if you have a custom kernel.

         -Derek

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.0.0.22.2.20080116162638.02528c68>