Date: Fri, 18 Jan 2013 14:38:57 +0530 From: "Desai, Kashyap" <Kashyap.Desai@lsi.com> To: Dani <dppascual@gmail.com>, "freebsd-scsi@freebsd.org" <freebsd-scsi@freebsd.org> Subject: RE: driver mps - SCSI sense: ILLEGAL REQUEST (Logical block address out of range) Message-ID: <B2FD678A64EAAD45B089B123FDFC3ED75E68FD5F68@inbmail01.lsi.com> In-Reply-To: <CAAOK-NCeRZ28_-5FxTcWKtj=vWYrEhTpgKacrFbpMv6hNvuM0Q@mail.gmail.com> References: <CAAOK-NCeRZ28_-5FxTcWKtj=vWYrEhTpgKacrFbpMv6hNvuM0Q@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Dani: Can you share complete "Driver logs" ( I mean /var/log/messages") Also explain reproduction method. I will try to understand from logs what i= s going wrong. My very first observation is your "/dev/da24" is Xprot and it is just 20MB = drive. So your application may be trying to write beyond max LBA of /dev/da= 24. You should exclude /dev/da24 from your test. ` Kashyap=20 > -----Original Message----- > From: owner-freebsd-scsi@freebsd.org [mailto:owner-freebsd- > scsi@freebsd.org] On Behalf Of Dani > Sent: Monday, January 14, 2013 6:07 PM > To: freebsd-scsi@freebsd.org > Subject: driver mps - SCSI sense: ILLEGAL REQUEST (Logical block address > out of range) >=20 > Hi all, >=20 > I have installed FreeBSD 9.1 on Dell PowerEdge r720. This server is > connected to the storage array Dell PowerVault MD3200 using SAS cables. > I have created a ZFS pool with the SAS disks (Dell PowerVault MD3200) > and can perform read/write operations in the pool without problems. > However, when I export the pool and then import it, the following errors > are showed: >=20 > (da24:mps0:0:3:31): Field Replaceable Unit: 5 > (da24:mps0:0:3:31): Error 22, Unretryable error > (da24:mps0:0:3:31): READ(10). CDB: 28 0 0 0 0 0 0 1 0 0 > (da24:mps0:0:3:31): CAM status: SCSI Status Error > (da24:mps0:0:3:19): SCSI status: Check Condition > (da24:mps0:0:3:31): SCSI sense: ILLEGLA REQUEST asc:21,0 (Logical block > address out of range) >=20 >=20 > The device da24 is an access device to the storage array: >=20 > da24 at mps0 bus 0 scbus0 target 3 lun 31 > da24: <DELL Universal Xport 0780> Fixed Direct Access SCSI-5 device > da24: 600.000MB/s transfers > da24: Command Queueing enabled > da24: 20MB (40960 512 byte sectors: 64H 32S/T 20C) >=20 > #zpool status > pool: pool0 > state: ONLINE > scan: none requested > config: >=20 > NAME STATE READ > WRITE > CKSUM > pool0 ONLINE 0 > 0 0 > mirror-0 ONLINE 0 > 0 0 > da0 ONLINE 0 > 0 0 > da1 ONLINE 0 > 0 0 > spares > da2 AVAIL >=20 > errores: No known data errorsless >=20 > # diskinfo -v da0 > da0 > 512 #sectorsize > 999665448960 # mediasize in bytes (931G) > 1952471580 # mediasize in sectors > 0 # stripesize > 0 # stripeoffset > 121535 # Cylinders according to firmware. > 255 # Heads according to firmware. > 63 # Sectors according to firmware > 2AH000O # Disk ident. >=20 >=20 >=20 > Why are those errors produced? Are they relevant? Can they be omitted? >=20 > Thanks. Regards. > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B2FD678A64EAAD45B089B123FDFC3ED75E68FD5F68>