Date: Wed, 3 Aug 2011 18:58:00 -0500 From: Antonio Olivares <olivares14031@gmail.com> To: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: help setup an HP 3300C scanner Message-ID: <CAJ5UdcM6OZe48v34o68YHBZsjW41zsKaS_fdOF14jZwneCeXjw@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Dear folks, I am sorry to bother you guys, but I need your help. I have a scanner HP 3300C scanner that is connected to one of my freebsd 8.2 amd machines. I have done my homework: read section scanners on FreeBSD Handbook: http://www.freebsd.org/doc/handbook/scanners.html looked at other threads: http://www.daemonforums.org/showthread.php?t=2057&page=1 http://www.dslreports.com/forum/remark,12037990 As root user, I can find the device name: quadcore# sane-find-scanner -q found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0205 [HP ScanJet 3300C]) at libusb:/dev/usb:/dev/ugen4.2 found USB scanner (vendor=0x0bda, product=0x8187 [RTL8187_Wireless]) at libusb:/dev/usb:/dev/ugen3.3 but as myself(regular user) not :( [olivares@quadcore /usr/home/olivares]$ sane-find-scanner -q [olivares@quadcore /usr/home/olivares]$ I try to run simplescan -L but can't get it to work. I run xsane and it tells me that it can't find devices. I looked in /etc/sane.d/ and found hp.conf and edited it to handbook scanners section, see hp.conf below: quadcore# pwd /usr/local/etc/sane.d quadcore# ls -l total 166 -r--r--r-- 1 root wheel 25 Aug 3 17:46 abaton.conf -r--r--r-- 1 root wheel 14 Aug 3 17:46 agfafocus.conf -r--r--r-- 1 root wheel 24 Aug 3 17:46 apple.conf -r--r--r-- 1 root wheel 26 Aug 3 17:46 artec.conf -r--r--r-- 1 root wheel 4188 Aug 3 17:46 artec_eplus48u.conf -r--r--r-- 1 root wheel 543 Aug 3 17:46 avision.conf -r--r--r-- 1 root wheel 29 Aug 3 17:46 bh.conf -r--r--r-- 1 root wheel 35 Aug 3 17:46 canon.conf -r--r--r-- 1 root wheel 193 Aug 3 17:46 canon630u.conf -r--r--r-- 1 root wheel 2834 Aug 3 17:46 canon_dr.conf -r--r--r-- 1 root wheel 509 Aug 3 17:46 cardscan.conf -r--r--r-- 1 root wheel 34 Aug 3 17:46 coolscan.conf -r--r--r-- 1 root wheel 754 Aug 3 17:46 coolscan2.conf -r--r--r-- 1 root wheel 754 Aug 3 17:46 coolscan3.conf -r--r--r-- 1 root wheel 984 Aug 3 17:46 dc210.conf -r--r--r-- 1 root wheel 984 Aug 3 17:46 dc240.conf -r--r--r-- 1 root wheel 704 Aug 3 17:46 dc25.conf -r--r--r-- 1 root wheel 492 Aug 3 17:46 dell1600n_net.conf drwxr-xr-x 2 root wheel 1536 Aug 3 17:46 dist -r--r--r-- 1 root wheel 682 Aug 3 17:46 dll.conf drwxr-xr-x 2 root wheel 512 Aug 3 17:46 dll.d -r--r--r-- 1 root wheel 12 Aug 3 17:46 dmc.conf -r--r--r-- 1 root wheel 1402 Aug 3 17:46 epjitsu.conf -r--r--r-- 1 root wheel 793 Aug 3 17:46 epson.conf -r--r--r-- 1 root wheel 376 Aug 3 17:46 epson2.conf -r--r--r-- 1 root wheel 1679 Aug 3 17:46 fujitsu.conf -r--r--r-- 1 root wheel 1157 Aug 3 17:46 genesys.conf -r--r--r-- 1 root wheel 7798 Aug 3 17:46 gt68xx.conf -r--r--r-- 1 root wheel 589 Aug 3 18:44 hp.conf -r--r--r-- 1 root wheel 396 Aug 3 17:46 hp3900.conf -r--r--r-- 1 root wheel 76 Aug 3 17:46 hp4200.conf -r--r--r-- 1 root wheel 238 Aug 3 17:46 hp5400.conf -r--r--r-- 1 root wheel 24 Aug 3 17:46 hs2p.conf -r--r--r-- 1 root wheel 38 Aug 3 17:46 ibm.conf -r--r--r-- 1 root wheel 367 Aug 3 17:46 kodak.conf -r--r--r-- 1 root wheel 113 Aug 3 17:46 leo.conf -r--r--r-- 1 root wheel 96 Aug 3 17:46 lexmark.conf -r--r--r-- 1 root wheel 187 Aug 3 17:46 ma1509.conf -r--r--r-- 1 root wheel 666 Aug 3 17:46 matsushita.conf -r--r--r-- 1 root wheel 268 Aug 3 17:46 microtek.conf -r--r--r-- 1 root wheel 279 Aug 3 17:46 microtek2.conf -r--r--r-- 1 root wheel 2125 Aug 3 17:46 mustek.conf -r--r--r-- 1 root wheel 809 Aug 3 17:46 mustek_usb.conf -r--r--r-- 1 root wheel 13 Aug 3 17:46 nec.conf -r--r--r-- 1 root wheel 573 Aug 3 17:46 net.conf -r--r--r-- 1 root wheel 365 Aug 3 17:46 p5.conf -r--r--r-- 1 root wheel 75 Aug 3 17:46 pie.conf -r--r--r-- 1 root wheel 492 Aug 3 17:46 pixma.conf -r--r--r-- 1 root wheel 4142 Aug 3 17:46 plustek.conf -r--r--r-- 1 root wheel 943 Aug 3 17:46 plustek_pp.conf -r--r--r-- 1 root wheel 29 Aug 3 17:46 ricoh.conf -r--r--r-- 1 root wheel 183 Aug 3 17:46 rts8891.conf -r--r--r-- 1 root wheel 13 Aug 3 17:46 s9036.conf -r--r--r-- 1 root wheel 1052 Aug 3 17:46 saned.conf -r--r--r-- 1 root wheel 48 Aug 3 17:46 sceptre.conf -r--r--r-- 1 root wheel 1464 Aug 3 17:46 sharp.conf -r--r--r-- 1 root wheel 115 Aug 3 17:46 sm3840.conf -r--r--r-- 1 root wheel 2245 Aug 3 17:46 snapscan.conf -r--r--r-- 1 root wheel 10 Aug 3 17:46 sp15c.conf -r--r--r-- 1 root wheel 2224 Aug 3 17:46 st400.conf -r--r--r-- 1 root wheel 178 Aug 3 17:46 stv680.conf -r--r--r-- 1 root wheel 28 Aug 3 17:46 tamarack.conf -r--r--r-- 1 root wheel 355 Aug 3 17:46 teco1.conf -r--r--r-- 1 root wheel 636 Aug 3 17:46 teco2.conf -r--r--r-- 1 root wheel 217 Aug 3 17:46 teco3.conf -r--r--r-- 1 root wheel 1807 Aug 3 17:46 test.conf -r--r--r-- 1 root wheel 1495 Aug 3 17:46 u12.conf -r--r--r-- 1 root wheel 3094 Aug 3 17:46 umax.conf -r--r--r-- 1 root wheel 386 Aug 3 17:46 umax1220u.conf -r--r--r-- 1 root wheel 1684 Aug 3 17:46 umax_pp.conf -r--r--r-- 1 root wheel 399 Aug 3 17:46 xerox_mfp.conf quadcore# cat hp.conf #scsi HP # Uncomment the following if you have "Error during device I/O" on SCSI # option dumb-read # # The usual place for a SCSI-scanner on Linux #/dev/scanner # # USB-scanners supported by the hp-backend # HP ScanJet 4100C #usb 0x03f0 0x0101 # HP ScanJet 5200C #usb 0x03f0 0x0401 # HP ScanJet 62X0C #usb 0x03f0 0x0201 # HP ScanJet 63X0C #usb 0x03f0 0x0601 # HP ScanJet 3300C 0x03f0 0x0205 at libusb:/dev/usb:/dev/ugen4.2 usb /dev/uscanner0 # # Uncomment the following if your scanner is connected by USB, # but you are not using libusb # /dev/usb/scanner0 # option connect-device [olivares@quadcore /usr/home/olivares]$ scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). I have a file that should help with permissions, but I don't know if that could be the cause? [olivares@quadcore /usr/home/olivares]$ cat /etc/rc.conf # -- sysinstall generated deltas -- # Tue Jul 26 23:20:43 2011 # Created: Tue Jul 26 23:20:43 2011 # Enable network daemons for user convenience. # Please make all changes to this file, not to /etc/defaults/rc.conf. # This file now contains just the overrides from /etc/defaults/rc.conf. hostname="quadcore.home" ifconfig_msk0="DHCP" ntpdate_enable="YES" ntpdate_hosts="north-america.pool.ntp.org" tcp_extensions="NO" dbus_enable="YES" hald_enable="YES" devfs_system_ruleset="Removable_Media" lpd_enable="YES" ipfilter_enable="YES" ipfileter_rules="/etc/ipf.rules" ipmon_enable="YES" ipmon_flags="-Ds" [olivares@quadcore /usr/home/olivares]$ cat /etc/dev devd/ devd.conf devfs.conf devfs.rules [olivares@quadcore /usr/home/olivares]$ cat /etc/devfs.rules [Removable Media] add path 'ad*' mode 0666 group operator add path 'acd*' mode 0666 group operator add path 'cd*' mode 0666 group operator add path 'pass*' mode 0666 group operator add path 'xpt*' mode 0666 group operator add path 'ugen*' mode 0666 group operator add path 'usb*' mode 0666 group operator add path 'lpt*' mode 0666 group operator add path 'ulpt*' mode 0666 group operator add path 'unlpt*' mode 0666 group operator add path 'fd*' mode 0666 group operator Do I need to add uscanner* to it? or another suggestion. I would like for the scanner to work as user. Advice/suggestions/comments are welcome and appreciated :) Regards, Antonio
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ5UdcM6OZe48v34o68YHBZsjW41zsKaS_fdOF14jZwneCeXjw>