Date: Tue, 26 Sep 2006 00:09:47 -0700 (PDT) From: Nate Eldredge <nge@cs.hmc.edu> To: freebsd-questions@freebsd.org Subject: Missing cd0 device node Message-ID: <Pine.LNX.4.64.0609252355270.3207@knuth.cs.hmc.edu>
next in thread | raw e-mail | index | archive | help
Hi all,
In the course of various screwing around with my ATAPI CDROM device
(including some dvd ripping and playing that got aborted at odd moments),
I got the following messages:
Sep 25 20:50:07 vulcan kernel: acd0: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
Sep 25 20:50:07 vulcan kernel: acd0: timeout waiting to issue command
Sep 25 20:50:07 vulcan kernel: acd0: error issuing SETFEATURES SET TRANSFER MODE command
Sep 25 20:50:07 vulcan kernel: acd0: TIMEOUT - REQUEST_SENSE retrying (1 retry left)
Sep 25 20:50:18 vulcan kernel: acd0: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
Sep 25 20:50:18 vulcan kernel: acd0: timeout waiting to issue command
Sep 25 20:50:18 vulcan kernel: acd0: error issuing ATA PACKET command
Sep 25 20:50:18 vulcan kernel: acd0: TIMEOUT - REQUEST_SENSE retrying (0 retries left)
Sep 25 20:50:29 vulcan kernel: acd0: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
Sep 25 20:50:29 vulcan kernel: acd0: timeout waiting to issue command
Sep 25 20:50:29 vulcan kernel: acd0: error issuing ATA PACKET command
Sep 25 20:50:29 vulcan kernel: acd0: FAILURE - REQUEST_SENSE timed out
Sep 25 20:50:29 vulcan kernel: (cd0:ata0:0:0:0): lost device
Sep 25 20:50:29 vulcan kernel: (cd0:ata0:0:0:0): removing device entry
Sep 25 20:50:29 vulcan kernel: (probe0:ata0:0:0:0): Lost target 0???
Sep 25 20:50:45 vulcan kernel: acd0: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
Sep 25 20:50:45 vulcan kernel: acd0: timeout waiting to issue command
Sep 25 20:50:45 vulcan kernel: acd0: error issuing ATA PACKET command
Sep 25 20:50:45 vulcan kernel: acd0: FAILURE - TEST_UNIT_READY timed out
I also have atapicam in use for DVD burning, and I now find that /dev/cd0
is missing, and I can't figure out how to get it back. "camcontrol rescan
all" completes successfully, and I have
vulcan# camcontrol devlist
<DVDRW IDE 16X A07J> at scbus1 target 0 lun 0 ()
But I can't seem to do anything with the device:
vulcan# camcontrol inquiry cd0
camcontrol: cam_lookup_pass: CAMGETPASSTHRU ioctl failed
cam_lookup_pass: No such file or directory
cam_lookup_pass: either the pass driver isn't in your kernel
cam_lookup_pass: or cd0 doesn't exist
vulcan# camcontrol inquiry 1:0
camcontrol: cam_open_btl: no passthrough device found at 1:0:0
All the relevant devices are in my kernel, and always have been:
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
#device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
device atapicam # emulate ATAPI devices as SCSI ditto via CAM
# needs CAM to be present (scbus & pass)
# SCSI Controllers
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
#device ch # SCSI media changers
device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
I also tried restarting /etc/rc.d/devfs and devd without effect, as well
as "cdcontrol reset", and "camcontrol reset all".
Any suggestions on how to recover my cd0 device so I can use it again? I
suspect rebooting would fix it, but I would rather avoid rebooting this
machine as it handles a number of important tasks.
Thanks in advance. I'd appreciate a personal CC on any replies, if
convenient, so I don't miss them in my digest.
--
Nate Eldredge
nge@cs.hmc.edu
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.64.0609252355270.3207>