Skip site navigation (1)Skip section navigation (2)

2006/freebsd-current/20060910.freebsd-current

Messages: 172, sorted by Subject.
Last update: Sun Sep 10 3:50:30 2006

Up | Home | Archive Sorted by: Subject | Author | Date | Reverse Date
  1. Sep  7 Eric Kjeldergaard   6.1 install on a PowerEdge 6400 with AMR raid card
  2. Sep  9 Frode Nordahl        Re: 6.1 install on a PowerEdge 6400 with AMR raid ca
  3. Sep  6 Frank               6.X wont boot on Dell XPS 700 (fwd)
  4. Sep  3 Kris Kennaway       Re: [ANN] unionfs patchset-16 release, it is ready f
  5. Sep  3 Kris Kennaway        Re: [ANN] unionfs patchset-16 release, it is ready f
  6. Sep  4 Kris Kennaway        Re: [ANN] unionfs patchset-16 release, it is ready f
  7. Sep  5 Daichi GOTO          Re: [ANN] unionfs patchset-16 release, it is ready f
  8. Sep  7 FreeBSD Tinderbox   [head tinderbox] failure on amd64/amd64
  9. Sep  7 FreeBSD Tinderbox   [head tinderbox] failure on i386/i386
 10. Sep  9 FreeBSD Tinderbox    [head tinderbox] failure on i386/i386
 11. Sep  7 FreeBSD Tinderbox   [head tinderbox] failure on i386/pc98
 12. Sep  9 FreeBSD Tinderbox    [head tinderbox] failure on i386/pc98
 13. Sep  7 FreeBSD Tinderbox   [head tinderbox] failure on sparc64/sparc64
 14. Sep  8 FreeBSD Tinderbox    [head tinderbox] failure on sparc64/sparc64
 15. Sep  9 FreeBSD Tinderbox    [head tinderbox] failure on sparc64/sparc64
 16. Sep  8 Andrey V. Elsukov   aac(4) update request
 17. Sep  5 Garance A Drosehn   Adding a '-D date' option to `cat'
 18. Sep  5 Giorgos Keramidas    Re: Adding a '-D date' option to `cat'
 19. Sep  5 Peter Jeremy         Re: Adding a '-D date' option to `cat'
 20. Sep  5 Sam Leffler          Re: Adding a '-D date' option to `cat'


21. Sep 5 Julian H. Stacey Re: Adding a '-D date' option to `cat' 22. Sep 5 Doug Barton Re: Adding a '-D date' option to `cat' 23. Sep 5 Julian Elischer Re: Adding a '-D date' option to `cat' 24. Sep 5 Garance A Drosehn Re: Adding a '-D date' option to `cat' 25. Sep 5 Doug Barton Re: Adding a '-D date' option to `cat' 26. Sep 5 Julian Elischer Re: Adding a '-D date' option to `cat' 27. Sep 5 Garance A Drosehn Re: Adding a '-D date' option to `cat' 28. Sep 5 Tony Maher Re: Adding a '-D date' option to `cat' 29. Sep 5 Mark Linimon Re: Adding a '-D date' option to `cat' 30. Sep 5 Fred Gilham Re: Adding a '-D date' option to `cat' 31. Sep 6 Ullrich Franke Re: Adding a '-D date' option to `cat' 32. Sep 6 Marian Hettwer Re: Adding a '-D date' option to `cat' 33. Sep 7 Bill Vermillion Re: Adding a 'D - date' option in 'cat' 34. Sep 7 Craig Boston Re: Adding a 'D - date' option in 'cat' 35. Sep 7 Garance A Drosehn Re: Adding a 'D - date' option in 'cat' 36. Sep 8 Doug Barton Re: Adding a 'D - date' option in 'cat' 37. Sep 7 Bill Vermillion Re: Adding a 'D - Date' option to 'cat' 38. Sep 7 Garance A Drosihn Re: Adding a 'D - Date' option to 'cat' 39. Sep 7 Oliver Fromme Re: Adding a 'D - Date' option to 'cat' 40. Sep 8 Bill Vermillion Re: Adding a 'D - Date' option to 'cat'
41. Sep 8 Don L. Belcher Re: Adding a 'D - Date' option to 'cat' 42. Sep 9 Bill Vermillion Re: Adding a 'D - date' option to 'cat' 43. Sep 6 Garance A Drosehn Attempt #3, adding a new command 'sfilter' 44. Sep 6 Garance A Drosehn Re: Attempt #3, adding a new command 'sfilter' 45. Sep 6 Doug Barton Re: Attempt #3, adding a new command 'sfilter' 46. Sep 7 Ricardo Nabinger Sa Re: Attempt #3, adding a new command 'sfilter' 47. Sep 7 Maxim Sobolev Re: Attempt #3, adding a new command 'sfilter' 48. Sep 7 Julian Elischer Re: Attempt #3, adding a new command 'sfilter' 49. Sep 7 Garance A Drosehn Re: Attempt #3, adding a new command 'sfilter' 50. Sep 7 Maxim Sobolev Re: Attempt #3, adding a new command 'sfilter' 51. Sep 7 Mark Diekhans Re: Attempt #3, adding a new command 'sfilter' 52. Sep 7 Matthew Seaman Re: Attempt #3, adding a new command 'sfilter' 53. Sep 7 John Baldwin Re: Attempt #3, adding a new command 'sfilter' 54. Sep 7 Julian Elischer Re: Attempt #3, adding a new command 'sfilter' 55. Sep 7 John Baldwin Re: Attempt #3, adding a new command 'sfilter' 56. Sep 7 Garance A Drosehn Re: Attempt #3, adding a new command 'sfilter' 57. Sep 7 Garance A Drosihn Re: Attempt #3, adding a new command 'sfilter' 58. Sep 7 Kris Kennaway Re: Attempt #3, adding a new command 'sfilter' 59. Sep 7 Garance A Drosehn Re: Attempt #3, adding a new command 'sfilter' 60. Sep 7 Ricardo Nabinger Sa Re: Attempt #3, adding a new command 'sfilter'
61. Sep 7 John Baldwin Re: Attempt #3, adding a new command 'sfilter' 62. Sep 8 Kris Kennaway Re: Attempt #3, adding a new command 'sfilter' 63. Sep 8 sthaug@nethelp.no Re: Attempt #3, adding a new command 'sfilter' 64. Sep 8 John Baldwin Re: Attempt #3, adding a new command 'sfilter' 65. Sep 8 Kris Kennaway Re: Attempt #3, adding a new command 'sfilter' 66. Sep 7 Doug Ambrisko bge IPMI patch final review 67. Sep 7 Julian Elischer Re: bge IPMI patch final review 68. Sep 7 Doug Ambrisko Re: bge IPMI patch final review 69. Sep 7 Julian Elischer Re: bge IPMI patch final review 70. Sep 5 David Christensen RE: bge(4) on BCM 5752 A02 panic due to media autose 71. Sep 6 Oleg Bulyzhin Re: bge(4) on BCM 5752 A02 panic due to media autose 72. Sep 6 David Christensen RE: bge(4) on BCM 5752 A02 panic due to media autose 73. Sep 7 Sam Leffler Re: bge(4) on BCM 5752 A02 panic due to media autose 74. Sep 7 David Christensen RE: bge(4) on BCM 5752 A02 panic due to media autose 75. Sep 7 Simon L. Nielsen Re: bge(4) on BCM 5752 A02 panic due to media autose 76. Sep 5 John-Mark Gurney bus_get_dma_tag now necessary for drivers using bus_ 77. Sep 5 Poul-Henning Kamp Re: bus_get_dma_tag now necessary for drivers using 78. Sep 5 mjacob@freebsd.org Re: bus_get_dma_tag now necessary for drivers using 79. Sep 5 Scott Long Re: bus_get_dma_tag now necessary for drivers using 80. Sep 5 M. Warner Losh Re: bus_get_dma_tag now necessary for drivers using
81. Sep 5 Hans Petter Selasky Re: bus_get_dma_tag now necessary for drivers using 82. Sep 5 John-Mark Gurney Re: bus_get_dma_tag now necessary for drivers using 83. Sep 5 John-Mark Gurney Re: bus_get_dma_tag now necessary for drivers using 84. Sep 9 Sam Leffler CFT: ath hal 0.9.18.0 85. Sep 4 Mark Diekhans drm problems 86. Sep 6 John Hay error: `hlt_cpus_mask' undeclared 87. Sep 6 Maxim Sobolev Re: error: `hlt_cpus_mask' undeclared 88. Sep 4 Joel Dahl RE: Fatal trap 30 when loading if_xl 89. Sep 3 Alexander Leidinger Re: Improvements to gvinum and it's future 90. Sep 3 Alexander Leidinger Re: Improvements to gvinum and it's future 91. Sep 5 mami@nyitolap.hu Re: Improvements to gvinum and it's future 92. Sep 6 Gennady Proskurin installworld with WITHOUT_INFO broken 93. Sep 4 Randall Stewart Interesting lock issue mtx_flags = 0x6? 94. Sep 4 Randall Stewart Re: Interesting lock issue mtx_flags = 0x6? 95. Sep 5 John Baldwin Re: Interesting lock issue mtx_flags = 0x6? 96. Sep 8 Conrad J. Sabatier jdk-1.5.0 now works with libthr under CURRENT! 97. Sep 4 Derrick T. Woolwort Jumbo Frames with em 98. Sep 4 Gleb Smirnoff Re: Jumbo Frames with em 99. Sep 5 Jack Vogel Re: Jumbo Frames with em 100. Sep 5 Derrick T. Woolwort Re: Jumbo Frames with em
101. Sep 3 Nik ldap+samba problem on FreeBSD 5.5 102. Sep 5 Angka H. K. libpthread error 103. Sep 3 Jack Vogel Re: LSI 1030 mpt doesn't work if I build a new kerne 104. Sep 3 Matthew Jacob Re: LSI 1030 mpt doesn't work if I build a new kerne 105. Sep 3 Simon L. Nielsen Re: LSI 1030 mpt doesn't work if I build a new kerne 106. Sep 5 Matthew Jacob Re: LSI 1030 mpt doesn't work if I build a new kerne 107. Sep 6 Matthew Jacob Re: LSI 1030 mpt doesn't work if I build a new kerne 108. Sep 6 Rod Person Re: LSI 1030 mpt doesn't work if I build a new kerne 109. Sep 6 Matthew Jacob Re: LSI 1030 mpt doesn't work if I build a new kerne 110. Sep 6 Michael Sinatra Re: LSI 1030 mpt doesn't work if I build a new kerne 111. Sep 6 Bruce Burden Re: LSI 1030 mpt doesn't work if I build a new kerne 112. Sep 8 Michael Sinatra Re: LSI 1030 mpt doesn't work if I build a new kerne 113. Sep 9 Matthew Jacob Re: LSI 1030 mpt doesn't work if I build a new kerne 114. Sep 9 Angelo Turetta make release cross-platform: Malformed conditional ( 115. Sep 9 st41ker Re: make release cross-platform: Malformed condition 116. Sep 9 Angelo Turetta Re: make release cross-platform: Malformed condition 117. Sep 5 Aurojit Panda Marvell/SysKonnect Yukon driver patch 118. Sep 7 Julian Elischer Nate's talk starts in 30 minutes 119. Sep 7 Garance A Drosehn Re: Nate's talk starts in 30 minutes 120. Sep 8 Peter Holm Page fault in uipc_usrreq.c:997
121. Sep 8 John Baldwin Re: Page fault in uipc_usrreq.c:997 122. Sep 9 Robert Watson Re: Page fault in uipc_usrreq.c:997 123. Sep 9 Peter Holm Re: Page fault in uipc_usrreq.c:997 124. Sep 5 Pawel Jakub Dawidek Re: Porting ZFS file system to FreeBSD. 125. Sep 5 Pawel Jakub Dawidek Re: Porting ZFS file system to FreeBSD. 126. Sep 6 Ted Faber Re: Quick poll (openoffice port) 127. Sep 3 Claus Guttesen Re: Re: Several issues on Dell 1950/2950 servers (6- 128. Sep 3 Matthew Jacob Re: Re: Several issues on Dell 1950/2950 servers (6- 129. Sep 3 Jack Vogel Re: RFC: TSO patch for current 130. Sep 3 Jack Vogel Re: RFC: TSO patch for current 131. Sep 3 Andre Oppermann Re: RFC: TSO patch for current 132. Sep 4 Pyun YongHyeon Re: RFC: TSO patch for current 133. Sep 4 Andre Oppermann Re: RFC: TSO patch for current 134. Sep 5 Jack Vogel Re: RFC: TSO patch for current 135. Sep 5 Prafulla Deuskar Re: RFC: TSO patch for current 136. Sep 5 Jack Vogel Re: RFC: TSO patch for current 137. Sep 5 Andre Oppermann Re: RFC: TSO patch for current 138. Sep 5 Prafulla Deuskar Re: RFC: TSO patch for current 139. Sep 5 Andre Oppermann Re: RFC: TSO patch for current 140. Sep 5 Jack Vogel Re: RFC: TSO patch for current
141. Sep 5 Andre Oppermann Re: RFC: TSO patch for current 142. Sep 5 Jack Vogel Re: RFC: TSO patch for current 143. Sep 7 Andre Oppermann Re: RFC: TSO patch for current 144. Sep 8 Ian FREISLICH Re: RFC: TSO patch for current 145. Sep 8 Andre Oppermann Re: RFC: TSO patch for current 146. Sep 8 Andre Oppermann Re: RFC: TSO patch for current 147. Sep 9 Prafulla Deuskar Re: RFC: TSO patch for current 148. Sep 2 Claus Guttesen Re: Several issues on Dell 1950/2950 servers (6-STAB 149. Sep 3 Matthew Jacob Re: Several issues on Dell 1950/2950 servers (6-STAB 150. Sep 4 Sam Eaton Re: Several issues on Dell 1950/2950 servers (6-STAB 151. Sep 4 Morten A. Middeltho Re: Several issues on Dell 1950/2950 servers (6-STAB 152. Sep 4 Morten A. Middeltho Re: Several issues on Dell 1950/2950 servers (6-STAB 153. Sep 4 Alex Salazar Re: Several issues on Dell 1950/2950 servers (6-STAB 154. Sep 5 Morten A. Middeltho Re: Several issues on Dell 1950/2950 servers (6-STAB 155. Sep 8 Alex Salazar Re: Several issues on Dell 1950/2950 servers (6-STAB 156. Sep 9 Matthew Jacob Re: Several issues on Dell 1950/2950 servers (6-STAB 157. Sep 9 Matthew Jacob Re: Several issues on Dell 1950/2950 servers (6-STAB 158. Sep 5 John Baldwin Re: Simplified Steps for Building a Loadable module 159. Sep 7 Matthew Jacob Speaking of BGE(4) 160. Sep 8 Oleg Bulyzhin Re: Speaking of BGE(4)
161. Sep 8 Matthew Jacob Re: Speaking of BGE(4) 162. Sep 3 Julian Elischer Re: suggested addition to 'date' 163. Sep 4 Oliver Fromme Re: suggested addition to 'date' 164. Sep 4 Oliver Fromme Re: suggested addition to 'date' 165. Sep 4 Peter Jeremy Re: suggested addition to 'date' 166. Sep 5 Giorgos Keramidas Re: suggested addition to 'date' 167. Sep 3 Brooks Davis Re: watchdogd_flags followed by panic watchdog timeo 168. Sep 5 Vladimir Grebenschi wired top (and others) behavior - broken CPU usage r 169. Sep 5 Fabian Keil Re: wired top (and others) behavior - broken CPU usa 170. Sep 5 Vladimir Grebenschi Re: wired top (and others) behavior - broken CPU usa 171. Sep 5 Dominic Marks Re: wired top (and others) behavior - broken CPU usa 172. Sep 5 Ivan Voras Re: wired top (and others) behavior - broken CPU usa


Up | Home | Archive Sorted by: Subject | Author | Date | Reverse Date
Contact us
Last update: Sun Sep 10 3:50:30 2006
Created by mailindex 1.1
Copyright © 1995-2015 FreeBSD Project.
All rights reserved.