# kldload dtraceall
Rozdział 25. DTrace
This translation may be out of date. To help with the translations please access the FreeBSD translations instance.
Table of Contents
DTrace, also known as Dynamic Tracing, was developed by Sun™ as a tool for locating performance bottlenecks in production and pre-production systems. In addition to diagnosing performance problems, DTrace can be used to help investigate and debug unexpected behavior in both the FreeBSD kernel and in userland programs.
DTrace is a remarkable profiling tool, with an impressive array of features for diagnosing system issues. It may also be used to run pre-written scripts to take advantage of its capabilities. Users can author their own utilities using the DTrace D Language, allowing them to customize their profiling based on specific needs.
The FreeBSD implementation provides full support for kernel DTrace and experimental support for userland DTrace. Userland DTrace allows users to perform function boundary tracing for userland programs using the
pid provider, and to insert static probes into userland programs for later tracing. Some ports, such as databases/postgresql12-server and lang/php74 have a DTrace option to enable static probes.
The official guide to DTrace is maintained by the Illumos project at DTrace Guide.
After reading this chapter, you will know:
What DTrace is and what features it provides.
Differences between the Solaris™ DTrace implementation and the one provided by FreeBSD.
How to enable and use DTrace on FreeBSD.
Before reading this chapter, you should:
While the DTrace in FreeBSD is similar to that found in Solaris™, differences do exist. The primary difference is that in FreeBSD, DTrace is implemented as a set of kernel modules and DTrace can not be used until the modules are loaded. To load all of the necessary modules:
Beginning with FreeBSD 10.0-RELEASE, the modules are automatically loaded when
dtrace is run.
FreeBSD uses the
DDB_CTF kernel option to enable support for loading
CTF data from kernel modules and the kernel itself.
CTF is the Solaris™ Compact C Type Format which encapsulates a reduced form of debugging information similar to
DWARF and the venerable stabs.
CTF data is added to binaries by the
ctfmerge build tools. The
ctfconvert utility parses
DWARF sections from objects into either executables or shared libraries.
ELF debug sections created by the compiler and
Some different providers exist for FreeBSD than for Solaris™. Most notable is the
dtmalloc provider, which allows tracing
malloc() by type in the FreeBSD kernel. Some of the providers found in Solaris™, such as
mib, are not present in FreeBSD. These may appear in future versions of FreeBSD. Moreover, some of the providers available in both operating systems are not compatible, in the sense that their probes have different argument types. Thus,
D scripts written on Solaris™ may or may not work unmodified on FreeBSD, and vice versa.
Due to security differences, only
root may use DTrace on FreeBSD. Solaris™ has a few low level security checks which do not yet exist in FreeBSD. As such, the /dev/dtrace/dtrace is strictly limited to
DTrace falls under the Common Development and Distribution License (
CDDL) license. To view this license on FreeBSD, see /usr/src/cddl/contrib/opensolaris/OPENSOLARIS.LICENSE or view it online at http://opensource.org/licenses/CDDL-1.0. While a FreeBSD kernel with DTrace support is
BSD licensed, the
CDDL is used when the modules are distributed in binary form or the binaries are loaded.
In FreeBSD 9.2 and 10.0, DTrace support is built into the GENERIC kernel. Users of earlier versions of FreeBSD or who prefer to statically compile in DTrace support should add the following lines to a custom kernel configuration file and recompile the kernel using the instructions in Configuring the FreeBSD Kernel:
options KDTRACE_HOOKS options DDB_CTF makeoptions DEBUG=-g makeoptions WITH_CTF=1
Users of the AMD64 architecture should also add this line:
This option provides support for
FBT. While DTrace will work without this option, there will be limited support for function boundary tracing.
Once the FreeBSD system has rebooted into the new kernel, or the DTrace kernel modules have been loaded using
kldload dtraceall, the system will need support for the Korn shell as the DTrace Toolkit has several utilities written in
ksh. Make sure that the shells/ksh93 package or port is installed. It is also possible to run these tools under shells/pdksh or shells/mksh.
Finally, install the current DTrace Toolkit, a collection of ready-made scripts for collecting system information. There are scripts to check open files, memory,
CPU usage, and a lot more. FreeBSD 10 installs a few of these scripts into /usr/shared/dtrace. On other FreeBSD versions, or to install the full DTrace Toolkit, use the sysutils/dtrace-toolkit package or port.
The scripts found in /usr/shared/dtrace have been specifically ported to FreeBSD. Not all of the scripts found in the DTrace Toolkit will work as-is on FreeBSD and some scripts may require some effort in order for them to work on FreeBSD.
The DTrace Toolkit includes many scripts in the special language of DTrace. This language is called the D language and it is very similar to C++. An in depth discussion of the language is beyond the scope of this document. It is covered extensively in the Illumos Dynamic Tracing Guide.
DTrace scripts consist of a list of one or more probes, or instrumentation points, where each probe is associated with an action. Whenever the condition for a probe is met, the associated action is executed. For example, an action may occur when a file is opened, a process is started, or a line of code is executed. The action might be to log some information or to modify context variables. The reading and writing of context variables allows probes to share information and to cooperatively analyze the correlation of different events.
To view all probes, the administrator can execute the following command:
# dtrace -l | more
Each probe has an
PROVIDER (dtrace or fbt), a
MODULE, and a
FUNCTION NAME. Refer to dtrace(1) for more information about this command.
The examples in this section provide an overview of how to use two of the fully supported scripts from the DTrace Toolkit: the hotkernel and procsystime scripts.
The hotkernel script is designed to identify which function is using the most kernel time. It will produce output similar to the following:
# cd /usr/local/share/dtrace-toolkit # ./hotkernel Sampling... Hit Ctrl-C to end.
As instructed, use the Ctrl+C key combination to stop the process. Upon termination, the script will display a list of kernel functions and timing information, sorting the output in increasing order of time:
kernel`_thread_lock_flags 2 0.0% 0xc1097063 2 0.0% kernel`sched_userret 2 0.0% kernel`kern_select 2 0.0% kernel`generic_copyin 3 0.0% kernel`_mtx_assert 3 0.0% kernel`vm_fault 3 0.0% kernel`sopoll_generic 3 0.0% kernel`fixup_filename 4 0.0% kernel`_isitmyx 4 0.0% kernel`find_instance 4 0.0% kernel`_mtx_unlock_flags 5 0.0% kernel`syscall 5 0.0% kernel`DELAY 5 0.0% 0xc108a253 6 0.0% kernel`witness_lock 7 0.0% kernel`read_aux_data_no_wait 7 0.0% kernel`Xint0x80_syscall 7 0.0% kernel`witness_checkorder 7 0.0% kernel`sse2_pagezero 8 0.0% kernel`strncmp 9 0.0% kernel`spinlock_exit 10 0.0% kernel`_mtx_lock_flags 11 0.0% kernel`witness_unlock 15 0.0% kernel`sched_idletd 137 0.3% 0xc10981a5 42139 99.3%
This script will also work with kernel modules. To use this feature, run the script with
# ./hotkernel -m Sampling... Hit Ctrl-C to end. ^C MODULE COUNT PCNT 0xc107882e 1 0.0% 0xc10e6aa4 1 0.0% 0xc1076983 1 0.0% 0xc109708a 1 0.0% 0xc1075a5d 1 0.0% 0xc1077325 1 0.0% 0xc108a245 1 0.0% 0xc107730d 1 0.0% 0xc1097063 2 0.0% 0xc108a253 73 0.0% kernel 874 0.4% 0xc10981a5 213781 99.6%
The procsystime script captures and prints the system call time usage for a given process
PID) or process name. In the following example, a new instance of /bin/csh was spawned. Then, procsystime was executed and remained waiting while a few commands were typed on the other incarnation of
csh. These are the results of this test:
# ./procsystime -n csh Tracing... Hit Ctrl-C to end... ^C Elapsed Times for processes csh, SYSCALL TIME (ns) getpid 6131 sigreturn 8121 close 19127 fcntl 19959 dup 26955 setpgid 28070 stat 31899 setitimer 40938 wait4 62717 sigaction 67372 sigprocmask 119091 gettimeofday 183710 write 263242 execve 492547 ioctl 770073 vfork 3258923 sigsuspend 6985124 read 3988049784
As shown, the
read() system call used the most time in nanoseconds while the
getpid() system call used the least amount of time.
Last modified on: 11 grudnia 2021 by Sergio Carlavilla Delgado