章 16. 安全事件稽查
The FreeBSD operating system includes support for security event auditing. Event auditing supports reliable, fine-grained, and configurable logging of a variety of security-relevant system events, including logins, configuration changes, and file and network access. These log records can be invaluable for live system monitoring, intrusion detection, and postmortem analysis. FreeBSD implements Sun™'s published Basic Security Module (BSM) Application Programming Interface (API) and file format, and is interoperable with the Solaris™ and Mac OS™ X audit implementations.
This chapter focuses on the installation and configuration of event auditing. It explains audit policies and provides an example audit configuration.
What event auditing is and how it works.
How to configure event auditing on FreeBSD for users and processes.
How to review the audit trail using the audit reduction and review tools.
The audit facility has some known limitations. Not all security-relevant system events are auditable and some login mechanisms, such as Xorg-based display managers and third-party daemons, do not properly configure auditing for user login sessions.
The security event auditing facility is able to generate very detailed logs of system activity. On a busy system, trail file data can be very large when configured for high detail, exceeding gigabytes a week in some configurations. Administrators should take into account the disk space requirements associated with high volume audit configurations. For example, it may be desirable to dedicate a file system to /var/audit so that other file systems are not affected if the audit file system becomes full.
The following terms are related to security event auditing:
event: an auditable event is any event that can be logged using the audit subsystem. Examples of security-relevant events include the creation of a file, the building of a network connection, or a user logging in. Events are either "attributable", meaning that they can be traced to an authenticated user, or "non-attributable". Examples of non-attributable events are any events that occur before authentication in the login process, such as bad password attempts.
class: a named set of related events which are used in selection expressions. Commonly used classes of events include "file creation" (fc), "exec" (ex), and "login_logout" (lo).
record: an audit log entry describing a security event. Records contain a record event type, information on the subject (user) performing the action, date and time information, information on any objects or arguments, and a success or failure condition.
trail: a log file consisting of a series of audit records describing security events. Trails are in roughly chronological order with respect to the time events completed. Only authorized processes are allowed to commit records to the audit trail.
selection expression: a string containing a list of prefixes and audit event class names used to match events.
preselection: the process by which the system identifies which events are of interest to the administrator. The preselection configuration uses a series of selection expressions to identify which classes of events to audit for which users, as well as global settings that apply to both authenticated and unauthenticated processes.
reduction: the process by which records from existing audit trails are selected for preservation, printing, or analysis. Likewise, the process by which undesired audit records are removed from the audit trail. Using reduction, administrators can implement policies for the preservation of audit data. For example, detailed audit trails might be kept for one month, but after that, trails might be reduced in order to preserve only login information for archival purposes.
User space support for event auditing is installed as part of the base FreeBSD operating system. Kernel support is available in the GENERIC kernel by default, and auditd(8) can be enabled by adding the following line to /etc/rc.conf:
Then, start the audit daemon:
# service auditd start
Users who prefer to compile a custom kernel must include the following line in their custom kernel configuration file:
Selection expressions are used in a number of places in the audit configuration to determine which events should be audited. Expressions contain a list of event classes to match. Selection expressions are evaluated from left to right, and two expressions are combined by appending one onto the other.
預設稽查事件類別 summarizes the default audit event classes:
Match all event classes.
authentication and authorization
Administrative actions performed on the system as a whole.
Application defined action.
Audit calls to the
Audit program execution. Auditing of command line arguments and environmental variables is controlled via audit_control(5) using the
file attribute access
Audit events where a file is created as a result.
Audit events where file deletion occurs.
file attribute modify
Audit events in which data is read or files are opened for reading.
Audit events in which data is written or files are written or modified.
Audit use of the
Audit various forms of Inter-Process Communication, including POSIX pipes and System V IPC operations.
Audit non-attributable events.
Match no audit events.
Audit miscellaneous events.
These audit event classes may be customized by modifying the audit_class and audit_event configuration files.
Each audit event class may be combined with a prefix indicating whether successful/failed operations are matched, and whether the entry is adding or removing matching for the class and type. 稽查事件類別字首 summarizes the available prefixes:
Audit successful events in this class.
Audit failed events in this class.
Audit neither successful nor failed events in this class.
Do not audit successful events in this class.
Do not audit failed events in this class.
If no prefix is present, both successful and failed instances of the event will be audited.
The following example selection string selects both successful and failed login/logout events, but only successful execution events:
The following configuration files for security event auditing are found in /etc/security:
audit_class: contains the definitions of the audit classes.
audit_control: controls aspects of the audit subsystem, such as default audit classes, minimum disk space to leave on the audit log volume, and maximum audit trail size.
audit_event: textual names and descriptions of system audit events and a list of which classes each event is in.
audit_user: user-specific audit requirements to be combined with the global defaults at login.
audit_warn: a customizable shell script used by auditd(8) to generate warning messages in exceptional situations, such as when space for audit records is running low or when the audit trail file has been rotated.
Audit configuration files should be edited and maintained carefully, as errors in configuration may result in improper logging of events.
In most cases, administrators will only need to modify audit_control and audit_user. The first file controls system-wide audit properties and policies and the second file may be used to fine-tune auditing by user.
188.8.131.52. The audit_control File
A number of defaults for the audit subsystem are specified in audit_control:
dir:/var/audit dist:off flags:lo,aa minfree:5 naflags:lo,aa policy:cnt,argv filesz:2M expire-after:10M
dir entry is used to set one or more directories where audit logs will be stored. If more than one directory entry appears, they will be used in order as they fill. It is common to configure audit so that audit logs are stored on a dedicated file system, in order to prevent interference between the audit subsystem and other subsystems if the file system fills.
dist field is set to
yes, hard links will be created to all trail files in /var/audit/dist.
flags field sets the system-wide default preselection mask for attributable events. In the example above, successful and failed login/logout events as well as authentication and authorization are audited for all users.
minfree entry defines the minimum percentage of free space for the file system where the audit trail is stored.
naflags entry specifies audit classes to be audited for non-attributed events, such as the login/logout process and authentication and authorization.
policy entry specifies a comma-separated list of policy flags controlling various aspects of audit behavior. The
cnt indicates that the system should continue running despite an auditing failure (this flag is highly recommended). The other flag,
argv, causes command line arguments to the execve(2) system call to be audited as part of command execution.
filesz entry specifies the maximum size for an audit trail before automatically terminating and rotating the trail file. A value of
0 disables automatic log rotation. If the requested file size is below the minimum of 512k, it will be ignored and a log message will be generated.
expire-after field specifies when audit log files will expire and be removed.
184.108.40.206. The audit_user File
The administrator can specify further audit requirements for specific users in audit_user. Each line configures auditing for a user via two fields: the
alwaysaudit field specifies a set of events that should always be audited for the user, and the
neveraudit field specifies a set of events that should never be audited for the user.
The following example entries audit login/logout events and successful command execution for
root and file creation and successful command execution for
www. If used with the default audit_control, the
lo entry for
root is redundant, and login/logout events will also be audited for
Since audit trails are stored in the BSM binary format, several built-in tools are available to modify or convert these trails to text. To convert trail files to a simple text format, use
praudit. To reduce the audit trail file for analysis, archiving, or printing purposes, use
auditreduce. This utility supports a variety of selection parameters, including event type, event class, user, date or time of the event, and the file path or object acted on.
For example, to dump the entire contents of a specified audit log in plain text:
# praudit /var/audit/AUDITFILE
Where AUDITFILE is the audit log to dump.
Audit trails consist of a series of audit records made up of tokens, which
praudit prints sequentially, one per line. Each token is of a specific type, such as
header (an audit record header) or
path (a file path from a name lookup). The following is an example of an
header,133,10,execve(2),0,Mon Sep 25 15:58:03 2006, + 384 msec exec arg,finger,doug path,/usr/bin/finger attribute,555,root,wheel,90,24918,104944 subject,robert,root,wheel,root,wheel,38439,38032,42086,220.127.116.11 return,success,0 trailer,133
This audit represents a successful
execve call, in which the command
finger doug has been run. The
exec arg token contains the processed command line presented by the shell to the kernel. The
path token holds the path to the executable as looked up by the kernel. The
attribute token describes the binary and includes the file mode. The
subject token stores the audit user ID, effective user ID and group ID, real user ID and group ID, process ID, session ID, port ID, and login address. Notice that the audit user ID and real user ID differ as the user
robert switched to the
root account before running this command, but it is audited using the original authenticated user. The
return token indicates the successful execution and the
trailer concludes the record.
XML output format is also supported and can be selected by including
Since audit logs may be very large, a subset of records can be selected using
auditreduce. This example selects all audit records produced for the user
trhodes stored in AUDITFILE:
# auditreduce -u trhodes /var/audit/AUDITFILE | praudit
Members of the
audit group have permission to read audit trails in /var/audit. By default, this group is empty, so only the
root user can read audit trails. Users may be added to the
audit group in order to delegate audit review rights. As the ability to track audit log contents provides significant insight into the behavior of users and processes, it is recommended that the delegation of audit review rights be performed with caution.
16.4.1. 使用 Audit Pipes 即時監視
Audit pipes are cloning pseudo-devices which allow applications to tap the live audit record stream. This is primarily of interest to authors of intrusion detection and system monitoring applications. However, the audit pipe device is a convenient way for the administrator to allow live monitoring without running into problems with audit trail file ownership or log rotation interrupting the event stream. To track the live audit event stream:
# praudit /dev/auditpipe
By default, audit pipe device nodes are accessible only to the
root user. To make them accessible to the members of the
audit group, add a
devfs rule to /etc/devfs.rules:
add path 'auditpipe*' mode 0440 group audit
See devfs.rules(5) for more information on configuring the devfs file system.
It is easy to produce audit event feedback cycles, in which the viewing of each audit event results in the generation of more audit events. For example, if all network I/O is audited, and
16.4.2. 翻轉與壓縮 Audit Trail 檔
Audit trails are written to by the kernel and managed by the audit daemon, auditd(8). Administrators should not attempt to use newsyslog.conf(5) or other tools to directly rotate audit logs. Instead,
audit should be used to shut down auditing, reconfigure the audit system, and perform log rotation. The following command causes the audit daemon to create a new audit log and signal the kernel to switch to using the new log. The old log will be terminated and renamed, at which point it may then be manipulated by the administrator:
# audit -n
If auditd(8) is not currently running, this command will fail and an error message will be produced.
Adding the following line to /etc/crontab will schedule this rotation every twelve hours:
0 */12 * * * root /usr/sbin/audit -n
The change will take effect once /etc/crontab is saved.
Automatic rotation of the audit trail file based on file size is possible using
filesz in audit_control as described in The audit_control File.
As audit trail files can become very large, it is often desirable to compress or otherwise archive trails once they have been closed by the audit daemon. The audit_warn script can be used to perform customized operations for a variety of audit-related events, including the clean termination of audit trails when they are rotated. For example, the following may be added to /etc/security/audit_warn to compress audit trails on close:
# # Compress audit trail files on close. # if [ "$1" = closefile ]; then gzip -9 $2 fi
Other archiving activities might include copying trail files to a centralized server, deleting old trail files, or reducing the audit trail to remove unneeded records. This script will be run only when audit trail files are cleanly terminated, so will not be run on trails left unterminated following an improper shutdown.
最後修改於: December 11, 2021 由 Sergio Carlavilla Delgado