Date: Sat, 15 Apr 2000 23:00:26 -0400 From: William Freeman <wdf@picusnet.com> To: Bhishan Hemrajani <bhishan@cytosine.dhs.org> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: SMC Thin Ethernet under 4.0 Message-ID: <38F92CC9.B5E6292C@picusnet.com> References: <200004160627.e3G6RDV07276@cytosine.dhs.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--------------7724C41DEFEC2D7D3788D15F Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Ok, we have a copy of WinNT on the other box right now to get some IRQ settings and stuff. I can telnet to my NIC, but we can't ping back and forth and he can't telnet into me. Think you could help out? Bhishan Hemrajani wrote: > Do you have a public interface in order to do nat? > The first ethernet card seems fine. However, in order to do NAT, you have to > have an interface to be routing to. > > Once you configure your public interface, then read the manpage for natd (all > the way at the bottom) and it has exact instructions on how to do this. > > --bhishan > > > well, i'm not exactly sure. we have never built a LAN before as we never had > > the need to do so. I know how it should work, but my friend is having a hell > > of a time getting FreeBSD on his box (he has some unique configurations). > > when i ifconfig ed0: > > > > > > ed0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255 > > inet6 fe80::200:c0ff:fe7d:f56%ed0 prefixlen 64 scopeid 0x2 > > ether 00:00:c0:7d:0f:56 > > i don't know what it should say, so i don't know if my card is configured > > correctly. I think it is, though. > > > > Bhishan Hemrajani wrote: > > > > > We need a lot more information in order for us to help you. > > > > > > First, are both of your ethernet cards configured properly? (Meaning you > > > can ping, telnet, etc. using both cards) > > > > > > # ifconfig -a > > > > > > Second, have you read the nat manpage? (It has step by step instructions > > > on how to do this) > > > > > > $ man natd > > > > > > Third, have you searched the mailing lists? (There are at least one hundred > > > instances of this) > > > > > > $ lynx http://www.freebsd.org/search > > > > > > --bhishan > > > > > > > My friends and I are atempting to have a network party tomorrow, how > > > > ever i can't make most devices i need i think. i have an ed0 for my NIC > > > > > > > > and it's bound to 10.0.0.1 (i'll also be running NATd). Anyone one have > > > > > > > > any advice on makeing things work correctly? from the tests wee have > > > > tried, i don't think they are. Any help on how to set up this would be > > > > greatly appreciated. > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > -- > > William D. Freeman [wdf@picusnet.com] > > http://members.xoom.com/EvilGNU > > -----BEGIN GEEK CODE BLOCK----- > > Version: 3.12 > > GU d? s+:++ a--- C++ UB+++ P+ L- E W++ N- o-- K---- w--- > > O---- M- V-- PS--- PE++ Y-- PGP---- t+ 5-- X++ R tv b+ DI++++ D--- > > G- e- h! r !y+ > > ------END GEEK CODE BLOCK------ > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- William D. Freeman [wdf@picusnet.com] http://members.xoom.com/EvilGNU -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GU d? s+:++ a--- C++ UB+++ P+ L- E W++ N- o-- K---- w--- O---- M- V-- PS--- PE++ Y-- PGP---- t+ 5-- X++ R tv b+ DI++++ D--- G- e- h! r !y+ ------END GEEK CODE BLOCK------ --------------7724C41DEFEC2D7D3788D15F Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit <!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> Ok, we have a copy of WinNT on the other box right now to get some IRQ settings and stuff. I can telnet to my NIC, but we can't ping back and forth and he can't telnet into me. Think you could help out? <br> <br> <br> <p>Bhishan Hemrajani wrote: <blockquote TYPE=CITE>Do you have a public interface in order to do nat? <br>The first ethernet card seems fine. However, in order to do NAT, you have to <br>have an interface to be routing to. <p>Once you configure your public interface, then read the manpage for natd (all <br>the way at the bottom) and it has exact instructions on how to do this. <p>--bhishan <p>> well, i'm not exactly sure. we have never built a LAN before as we never had <br>> the need to do so. I know how it should work, but my friend is having a hell <br>> of a time getting FreeBSD on his box (he has some unique configurations). <br>> when i ifconfig ed0: <br>> <br>> <br>> ed0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 <br>> inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255 <br>> inet6 fe80::200:c0ff:fe7d:f56%ed0 prefixlen 64 scopeid 0x2 <br>> ether 00:00:c0:7d:0f:56 <br>> i don't know what it should say, so i don't know if my card is configured <br>> correctly. I think it is, though. <br>> <br>> Bhishan Hemrajani wrote: <br>> <br>> > We need a lot more information in order for us to help you. <br>> > <br>> > First, are both of your ethernet cards configured properly? (Meaning you <br>> > can ping, telnet, etc. using both cards) <br>> > <br>> > # ifconfig -a <br>> > <br>> > Second, have you read the nat manpage? (It has step by step instructions <br>> > on how to do this) <br>> > <br>> > $ man natd <br>> > <br>> > Third, have you searched the mailing lists? (There are at least one hundred <br>> > instances of this) <br>> > <br>> > $ lynx <a href="http://www.freebsd.org/search">http://www.freebsd.org/search</a> <br>> > <br>> > --bhishan <br>> > <br>> > > My friends and I are atempting to have a network party tomorrow, how <br>> > > ever i can't make most devices i need i think. i have an ed0 for my NIC <br>> > > <br>> > > and it's bound to 10.0.0.1 (i'll also be running NATd). Anyone one have <br>> > > <br>> > > any advice on makeing things work correctly? from the tests wee have <br>> > > tried, i don't think they are. Any help on how to set up this would be <br>> > > greatly appreciated. <br>> > > <br>> > > <br>> > > <br>> > > To Unsubscribe: send mail to majordomo@FreeBSD.org <br>> > > with "unsubscribe freebsd-questions" in the body of the message <br>> > > <br>> <br>> -- <br>> William D. Freeman [wdf@picusnet.com] <br>> <a href="http://members.xoom.com/EvilGNU">http://members.xoom.com/EvilGNU</a> <br>> -----BEGIN GEEK CODE BLOCK----- <br>> Version: 3.12 <br>> GU d? s+:++ a--- C++ UB+++ P+ L- E W++ N- o-- K---- w--- <br>> O---- M- V-- PS--- PE++ Y-- PGP---- t+ 5-- X++ R tv b+ DI++++ D--- <br>> G- e- h! r !y+ <br>> ------END GEEK CODE BLOCK------ <br>> <br>> <p>To Unsubscribe: send mail to majordomo@FreeBSD.org <br>with "unsubscribe freebsd-questions" in the body of the message</blockquote> <pre>-- William D. Freeman [wdf@picusnet.com] <A HREF="http://members.xoom.com/EvilGNU">http://members.xoom.com/EvilGNU</A> -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GU d? s+:++ a--- C++ UB+++ P+ L- E W++ N- o-- K---- w--- O---- M- V-- PS--- PE++ Y-- PGP---- t+ 5-- X++ R tv b+ DI++++ D--- G- e- h! r !y+ ------END GEEK CODE BLOCK------</pre> </html> --------------7724C41DEFEC2D7D3788D15F-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38F92CC9.B5E6292C>