Date: 07 Aug 2000 12:40:59 -0400 From: Chris Shenton <cshenton@uucom.com> To: "Otter" <otterr@telocity.com> Cc: "Harry Reed" <harry@infoscientific.com>, <freebsd-questions@FreeBSD.ORG>, <freebsd-scsi@FreeBSD.ORG> Subject: Re: Python 4320 DAT + FreeBSD-4.x Message-ID: <lfem4158is.fsf@Samizdat.uucom.com> In-Reply-To: "Otter"'s message of "Fri, 4 Aug 2000 14:09:24 -0400" References: <NIEJLGLKBDJHNLKBAKPDCEDACCAA.otterr@telocity.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 4 Aug 2000 14:09:24 -0400, "Otter" <otterr@telocity.com> said: Otter> I have an Adaptec 1542CF which worked fine in 2.x and up to Otter> 3.3, at which time I replaced it with a 2940U2W controller and Otter> moved to the 4.0-current branch. I haven't tested it in 4.0 or Otter> 5.0. One of my friends told me he heard that the 154x's don't Otter> work in 4.0 if you have more than 32mb. It sounds like BS to Otter> poor white trash like myself. Is there any truth to this? If Otter> so, what decides the limit? -Otter Works for me in 3.4, 3.5, 4.0, and 4.1. Two SCSI cards, and a Python 4xDDS2 juke (not your model): ahc0: <Adaptec 2940 SCSI adapter> port 0x6c00-0x6cff mem 0xe4101000-0xe4101fff rq 9 at device 8.0 on pci0 ahc0: aic7870 Single Channel A, SCSI Id=7, 16/255 SCBs ahc1: <Adaptec 2940 Ultra SCSI adapter> port 0x7400-0x74ff mem 0xe4102000-0xe412fff irq 10 at device 10.0 on pci0 ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs Waiting 5 seconds for SCSI devices to settle ahc0:A:5: refuses synchronous negotiation. Using asynchronous transfers sa0 at ahc0 bus 0 target 4 lun 0 sa0: <ARCHIVE Python 28849-XXX 4.CM> Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 15) sa1 at ahc0 bus 0 target 5 lun 0 sa1: <HP T4000s 1.06> Removable Sequential Access SCSI-2 device sa1: 3.300MB/s transfers da0 at ahc0 bus 0 target 3 lun 0 da0: <FUJITSU M2949S-512 0177> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 8682MB (17781964 512 byte sectors: 255H 63S/T 1106C) da1 at ahc1 bus 0 target 0 lun 0 da1: <SEAGATE ST19171W 0023> Fixed Direct Access SCSI-2 device da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C) ch0 at ahc0 bus 0 target 4 lun 1 ch0: <ARCHIVE Python 28849-XXX 4.CM> Removable Changer SCSI-2 device ch0: 5.000MB/s transfers (5.000MHz, offset 15) ch0: 4 slots, 1 drive, 1 picker, 0 portals To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?lfem4158is.fsf>