Date: Sun, 24 Mar 2002 12:52:01 +0100 From: "Steven Looman" <fsteevie@wish.net> To: "ISDN Mailinglist" <freebsd-isdn@FreeBSD.ORG> Subject: Re: Problems using isp devices other then isp0 Message-ID: <000601c1d32a$4fea8020$0200a8c0@coyote> References: <001401c1d2c0$be3ac180$0200a8c0@coyote>
next in thread | previous in thread | raw e-mail | index | archive | help
Oh,
I forgot...
roadrunner:~# ifconfig isp0
isp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
inet 0.0.0.0 --> 0.0.0.1 netmask 0xffffffff
inet6 fe80::220:18ff:fea0:7ae4%isp0 prefixlen 64 scopeid 0xb
ether 00:00:00:00:00:00
roadrunner:~# ifconfig isp1
isp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
inet6 fe80::220:18ff:fea0:7ae4%isp1 prefixlen 64 scopeid 0xc
ether 00:00:00:00:00:00
roadrunner:~# ifconfig isp2
isp2: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
inet6 fe80::220:18ff:fea0:7ae4%isp2 prefixlen 64 scopeid 0xd
ether 00:00:00:00:00:00
As you can see, only the isp0 device has an "inet 0.0.0.0 --> 0.0.0.1
netmask 0xffffffff" ipv4 ip.
I cannot set it on the other devices: I starts dialing but it is not added.
This is a part of my rc.conf:
network_interfaces="isp0 isp1 isp2 rl0 lo0"
ifconfig_rl0="inet 192.168.0.1 netmask 255.255.255.0"
ifconfig_isp0="inet 0.0.0.0 0.0.0.1 netmask 255.255.255.255"
ifconfig_isp1="inet 0.0.0.0 0.0.0.1 netmask 255.255.255.255"
ifconfig_isp2="inet 0.0.0.0 0.0.0.1 netmask 255.255.255.255"
Steven
----- Original Message -----
From: Steven Looman
To: ISDN Mailinglist
Sent: Sunday, March 24, 2002 12:16 AM
Subject: Problems using isp devices other then isp0
Hi,
I've got some problems dialing other than the standard (isp0) ISP-devices...
When I set my firewall rules and gateway 'n stuff to isp2 (for example) and
dial it, it connects and then immediately disconnects. I'm running
-STABLE (Sun Mar 17 21:33:39) on this box. Anybody knows what is going on?
It did work before...
Here is some debugging output:
24.03.2002 00:08:51 DBG msg_dialout: dial req from isp, unit 2
24.03.2002 00:08:51 DBG setup_dialout: entry GO-FREE ok!
24.03.2002 00:08:51 DBG find_by_device_for_dialout: found entry 2!
24.03.2002 00:08:51 DBG FSM event [msg-dialout]: [idle => dialing]
24.03.2002 00:08:51 DBG F_DIAL: local dial out request
24.03.2002 00:08:51 DBG select_first_dialno: only one no, no = 0676088030
24.03.2002 00:08:51 CHD 00134 GO-FREE rate 300 sec/unit (conf)
24.03.2002 00:08:51 DBG sendm_connect_req: ctrl = 0, chan = -1
24.03.2002 00:08:51 DBG decr_free_channels: ctrl 0, now 1 chan free
24.03.2002 00:08:51 CHD 00134 GO-FREE dialing out from Tel2 to 0676088030
24.03.2002 00:08:51 DBG msg_l12stat_ind: unit 0, layer 1, state 1
24.03.2002 00:08:51 DBG msg_l12stat_ind: unit 0, layer 2, state 1
24.03.2002 00:08:52 DBG set_channel_busy: controller [0] channel B1 set to
BUSY!
24.03.2002 00:08:52 CHD 00134 GO-FREE outgoing call proceeding (ctl 0, ch 0)
24.03.2002 00:08:54 DBG msg_charging: 1 unit(s) (estimated)
24.03.2002 00:08:54 DBG set_channel_busy: controller [0] channel B1 already
busy!
24.03.2002 00:08:54 CHD 00134 GO-FREE outgoing call active (ctl 0, ch 0,
isp2)
24.03.2002 00:08:54 DBG FSM event [msg-con-act-ind]: [dialing => connected]
24.03.2002 00:08:54 DBG F_DOK: dial out ok
24.03.2002 00:08:54 DBG select_this_dialno: index = 0, no = 0676088030
24.03.2002 00:08:54 DBG isp2: switched to state 3
24.03.2002 00:08:54 DBG msg_drvrdisc_req: req from isp, unit 2
24.03.2002 00:08:54 DBG get_cep_by_driver: found entry 2!
24.03.2002 00:08:54 DBG FSM event [disconnect-req]: [connected =>
waitdisconnect]
24.03.2002 00:08:54 DBG F_DRQ: local disconnect request
24.03.2002 00:08:54 DBG sendm_disconnect_req: sent DISCONNECT_REQ
24.03.2002 00:08:54 CHD 00134 GO-FREE outgoing call disconnected (local)
24.03.2002 00:08:54 CHD 00134 GO-FREE cause 16: Normal call clearing (Q.850)
24.03.2002 00:08:54 DBG exec_prog: /etc/isdn/scripts/ip-up-down, args: -d
isp2 -f down -a 0.0.0.0
24.03.2002 00:08:54 CHD 00134 GO-FREE charging: 1 units, 0 seconds
24.03.2002 00:08:54 CHD 00134 GO-FREE accounting: in 106, out 98 (in 0, out
0)
24.03.2002 00:08:54 DBG set_channel_idle: controller [0] channel B1 set to
IDLE!
24.03.2002 00:08:54 DBG incr_free_channels: ctrl 0, now 2 chan free
24.03.2002 00:08:54 DBG FSM event [msg-disc-ind]: [waitdisconnect => idle]
24.03.2002 00:08:54 DBG F_MDI: disconnect indication, local disconnected
24.03.2002 00:08:54 DBG normal child (pid=11791) termination, exitstat = 0
24.03.2002 00:09:04 DBG msg_l12stat_ind: unit 0, layer 2, state 0
24.03.2002 00:09:15 DBG msg_l12stat_ind: unit 0, layer 1, state 0
Steven
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000601c1d32a$4fea8020$0200a8c0>