Date: Sun, 22 Jun 2008 09:53:41 +0300 From: Todorov <todorov@paladin.bulgarpress.com> To: freebsd-usb@freebsd.org Subject: FreeBSD 7.0 USB mass storage problems (OHCI) Message-ID: <485DF6F5.4020608@paladin.bulgarpress.com>
next in thread | raw e-mail | index | archive | help
This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig4760F429B094FCA638E4B0ED Content-Type: multipart/mixed; boundary="------------050903090806030101090807" This is a multi-part message in MIME format. --------------050903090806030101090807 Content-Type: text/plain; charset=windows-1251; format=flowed Content-Transfer-Encoding: quoted-printable Hi all, I have a problem (most probably after the migration from 6.3 to 7.0). Attached is my dmesg output. The problem is as follows: 1. I have permanently attached USB mouse and KBD which are working perfectly. 2. When I attach UMASS device on one of the ports sometimes it shows me the listing of the file system directories. On some devices it shows me partial list. I was trying with FAT & FAT32 FS formated devices but the behaviour is very strange. I've tried w/o ACPI enabled, tried w/ my sound card out of the machine (because of shared irq w/ the USB adapter) but thing are the same. Tried to fsck and fix the file system just in case. Also the same devices work on my ThinkPad laptop like charm. If I copy pictures some of them are ok, some messed with other pictures. Devices are 1GB FAT Olympus photo camera and 8GB FAT32 Kingston USB flash= =2E Sometimes I get g_vfs_done[READ..sector..size] error=3D5 Any advice - what can I check, do? Thanks! --=20 ------------------------------------------------ eng. Todor Todorov Network & Unix Administrator @ Powerforge Team mobile : (+359) 888 447 564 email : todorov [at] powerforge [dot] net website : www.powerforge.net ------------------------------------------------ In God I trust, all the others I check first ------------------------------------------------ --------------050903090806030101090807 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline; filename="dmesg.txt" Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 ~ The Regents of the University of California. All rights reserved= =2E FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE-p2 #2: Sat Jun 21 11:55:02 EEST 2008 ~ root@fallen:/usr/obj/usr/src/sys/TUNING Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(TM) XP 2100+ (1733.40-MHz 686-class CPU) ~ Origin =3D "AuthenticAMD" Id =3D 0x681 Stepping =3D 1 Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> ~ AMD Features=3D0xc0400800<SYSCALL,MMX+,3DNow!+,3DNow!> real memory =3D 1073725440 (1023 MB) avail memory =3D 1041547264 (993 MB) ACPI APIC Table: <ASUS A7S333 > ioapic0: Changing APIC ID to 2 ioapic0 <Version 0.0> irqs 0-23 on motherboard kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard acpi0: <ASUS A7S333> on motherboard acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 20 acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3ff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <SiS 745 host to AGP bridge> on hostb0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem 0xf0000000-0xf7ffffff,0xe7800000-0xe780ffff irq 16 at device 0.0 on pci1 drm0: <ATI Radeon QY RV100 7000/VE> on vgapci0 info: [drm] AGP at 0xe8000000 64MB info: [drm] Initialized radeon 1.25.0 20060524 isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 ohci0: <SiS 5571 USB controller> mem 0xe7000000-0xe7000fff irq 19 at device 2.2 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 23 at device 2.3 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 3 ports with 3 removable, self powered atapci0: <SiS 745 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xb800-0xb80f at device 2.5 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xa000-0xa03f irq 17 at device 9.0 on pci0 miibus0: <MII bus> on xl0 nsphy0: <DP83840 10/100 media interface> PHY 24 on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:60:08:0d:7b:50 xl0: [ITHREAD] pcm0: <Creative EMU10K1> port 0x9800-0x981f irq 19 at device 11.0 on pci0= pcm0: <SigmaTel STAC9708/11 AC97 Codec> pcm0: [ITHREAD] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff pnpid ORM0000 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] ppbus0: IEEE1284 device found /NIBBLE/ECP Probing for PnP devices on ppbus0: ppbus0: <HEWLETT-PACKARD DESKJET 840C> MLC,PCL,PML lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0= ums0: <vendor 0x04b3 product 0x310b, class 0/0, rev 2.00/1.60, addr 2> on uhub0 ums0: 3 buttons and Z dir. ukbd0: <LITE-ON Technology USB NetVista Full Width Keyboard., class 0/0, rev 1.10/0.10, addr 3> on uhub0 kbd2 at ukbd0 Timecounter "TSC" frequency 1733400297 Hz quality 800 Timecounters tick every 1.000 msec ad0: 76319MB <WDC WD800JB-00CRA1 17.07W17> at ata0-master UDMA100 acd0: DVDR <NEC DVD RW ND-3500AG/2.16> at ata1-master UDMA33 cd0 at ata1 bus 0 target 0 lun 0 cd0: <_NEC DVD_RW ND-3500AG 2.16> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad0s3a info: [drm] Setting GART location based on new memory map info: [drm] writeback test succeeded in 1 usecs drm0: [ITHREAD] --------------050903090806030101090807-- --------------enig4760F429B094FCA638E4B0ED Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkhd9vgACgkQibJkIG65HMfkXACgs73QBUu7m3KdZSC6UDgydErx Od0AoLYjvlItZw5otsSG1N47do5ljnWg =Pjxf -----END PGP SIGNATURE----- --------------enig4760F429B094FCA638E4B0ED--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?485DF6F5.4020608>