Date: Sun, 11 Dec 2011 01:06:58 +0100 From: Stefan Bethke <stb@lassitu.de> To: freebsd-embedded@freebsd.org Subject: Re: TL-WR1043: switch Message-ID: <74E4AF57-3D22-415E-B913-176753B09B16@lassitu.de> In-Reply-To: <EA0807C1-6FEE-4743-8DCA-1AC873664005@lassitu.de> References: <68ABED76-CB1F-405A-8036-EC254F7511FA@lassitu.de> <3B3DB17D-BF87-40EE-B1C1-445F178E8844@lassitu.de> <86030CEE-6839-4B96-ACDC-2BA9AC1E4AE4@lassitu.de> <2D625CC9-A0E3-47AA-A504-CE8FB2F90245@lassitu.de> <203BF1C8-D528-40C9-8611-9C7AC7E43BAB@lassitu.de> <3C0E9CA3-E130-4E9A-ABCC-1782E28999D1@lassitu.de> <CAJ-VmomWsGy9wMb0zA-WjTRP6Qh%2BO2u_Pe-rgkerFFpi04iKnw@mail.gmail.com> <6387ABA5-AC55-49DD-9058-E45CC0A3E0A0@lassitu.de> <CAJ-VmonM91s-kbbEqVDy9PvtH-gxLWYmusGiqzqCWMtfMdoo2A@mail.gmail.com> <EA0807C1-6FEE-4743-8DCA-1AC873664005@lassitu.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Am 05.12.2011 um 00:22 schrieb Stefan Bethke: > Limping along=85 >=20 > You can find a first version of a kernel driver at > http://www.lassitu.de/freebsd/rtl8366rb.c > http://www.lassitu.de/freebsd/rtl8366rbvar.h >=20 > It has no external interface, but it does set up a sensible VLAN = config for the TL-WR1043RB. Here's a much more complete interim version: http://www.lassitu.de/freebsd/etherswitch-rtl8366rb.patch This is how it looks like: # kldload rtl8366rb rtl8366rb0: <RTL8366RB Ethernet Switch Controller> at addr 0xa8 on = iicbus0 rtl8366rb0: rev. 3 miibus0: <MII bus> on rtl8366rb0 ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 ukphy0: OUI 0x00e04c, model 0x0016, rev. 1 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = 1000baseT-FDX, 1000baseT-FDX-master, auto ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy1: OUI 0x00e04c, model 0x0016, rev. 1 ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = 1000baseT-FDX, 1000baseT-FDX-master, auto ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus0 ukphy2: OUI 0x00e04c, model 0x0016, rev. 1 ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = 1000baseT-FDX, 1000baseT-FDX-master, auto ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus0 ukphy3: OUI 0x00e04c, model 0x0016, rev. 1 ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = 1000baseT-FDX, 1000baseT-FDX-master, auto ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus0 ukphy4: OUI 0x00e04c, model 0x0016, rev. 1 ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = 1000baseT-FDX, 1000baseT-FDX-master, auto etherswitch0: <Switch controller> on rtl8366rb0 # etherswitchcfg etherswitch0: Realtek RTL8366RB with 6 ports and 16 VLAN groups port0: vlangroup=3D1 port1: vlangroup=3D0 port2: vlangroup=3D0 port3: vlangroup=3D0 port4: vlangroup=3D0 port5: vlangroup=3D0 vlangroup0: vid=3D1, member=3D1,2,3,4,5 vlangroup1: vid=3D2, member=3D0,5t Right now, it's only printing information, but I'm hoping to add VLAN = configuration in the next couple of days. The phys are attached to a pseudo interface. I've yet to figure out = which operations are useful on them (I tried successfully to power down = a phy, which has the result of bringing down the link). For the moment, I have decided to ignore Alexsandrs work, since I didn't = manage to figure out how exactly the pieces attach to each other, and I = wasn't happy with the ioctls and the modelling of the virtual switch. = But I'm sure that can be fixed in the next couple of iterations. Stefan --=20 Stefan Bethke <stb@lassitu.de> Fon +49 151 14070811
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?74E4AF57-3D22-415E-B913-176753B09B16>