Date: Tue, 7 Jan 1997 13:26:54 +0200 (EET) From: jtp@iki.fi To: FreeBSD-gnats-submit@freebsd.org Cc: jtp@iki.fi Subject: i386/2395: 2.2-BETA installation problem on ICL ErgoPro s450 Message-ID: <199701071126.NAA02841@awreety.research.nokia.com> Resent-Message-ID: <199701071130.DAA16363@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 2395
>Category: i386
>Synopsis: 2.2-BETA installation problem on ICL ErgoPro s450
>Confidential: no
>Severity: critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Jan 7 03:30:00 PST 1997
>Last-Modified:
>Originator: Jukka Partanen
>Organization:
None
>Release: FreeBSD 2.2-BETA i386
>Environment:
ICL ErgoPro s450
64M memory
1G IDE disk
ATAPI CD-ROM
SMC Elite something ethernet adapter (the motherboard has a
built-in AMD PCNet/PCI ethernet adapter, but 2.2-960801-SNAP
does not seem to work with it)
SB clone on the motherboard
2.2-BETA boot floppy dated Dec 25 1996.
>Description:
I tried to install 2.2-BETA, but the kernel from the boot
floppy hangs right after printing
npx0 on motherboard
npx0: INT 16 interface
apm0: disabled, not probed
I used the visual configuration utility to disable all other
devices except fdc0, wdc0, wdc1, ed0 (configured to 0x300, 10,
0xcc000), and sc0. Previous releases have worked without
problems (I'm currently using 2.2-960801-SNAP).
Here is the kernel output from 2.2-960801-SNAP:
FreeBSD 2.2-960801-SNAP #0: Fri Oct 4 11:17:56 EET DST 1996
partanen@awreety.research.nokia.com:/usr/src/sys/compile/JTP
Calibrating clock(s) relative to mc146818A clock...
i586 clock: 133213859 Hz, i8254 clock: 1193118 Hz
CPU: Pentium (133.21-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52b Stepping=11
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
avail memory = 63074304 (61596K bytes)
Probing for devices on PCI bus 0:
chip0 <generic PCI bridge (vendor=1045 device=c557 subclass=0)> rev 0 on pci0:0
chip1 <generic PCI bridge (vendor=1045 device=c558 subclass=1)> rev 17 on pci0:1
vga0 <VGA-compatible display device> rev 1 on pci0:7
lnc1 <PCNet/PCI Ethernet adapter> rev 2 int a irq 11 on pci0:14
lnc1: Lance Ethernet controller, address 00:00:4b:30:41:a5
pci0:16: OPTI, device=0xc621, class=storage (ide) [no driver assigned]
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed1 at 0x300-0x31f irq 10 maddr 0xcc000 msize 16384 on isa
ed1: address 00:00:c0:32:30:6b, type WD8013EPC (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x63 irq 12 on motherboard
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <M1606TA>
wd0: 1039MB (2127888 sectors), 2111 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <FX001DE/G07>, removable, intr, iordis
aha0 not found at 0x330
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 3 on isa
sb0: <SoundBlaster Pro 3.1>
>How-To-Repeat:
Boot with the installation floppy.
>Fix:
Not known.
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199701071126.NAA02841>