Date: Wed, 31 Mar 1999 08:32:27 +0100 From: Richard Smith <rsmith@trltech.co.uk> To: freebsd-mobile@FreeBSD.org Subject: PCMCIA confusion Message-ID: <3701CF8B.6A4D91F5@trltech.co.uk>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------9D85A18EBC9EA02BE0E99EF1
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Tried -questions yesterday, sorry for the urgency, but I get this going
by friday or give up for now :(
I am trying to use the PCMCIA slots on a Viglen P120 notebook running
3.1R - I have attached the dmesg.boot for your information. After boot,
further relevant messages are as follows:
kernel pcic module loaded.
pccardc: /dev/card0: Device not configured
I have built a custom kernel with ze and zp removed and the three pccard
lines uncommented: controller card0, and two pcic devices.
I have enabled APM and PCCARD in rc.conf. I have copied
pccard.conf.sample to pccard.conf, and even tried it with fewer IRQs.
I get the same state irrespective of whether there are cards in the slot
or not. Is pccardd supposed to run all the time, it simply exits with no
error messages (with or without the -d option).
Confused. Any help would be gratefully appreciated.
Thanks,
Richard.
--------------9D85A18EBC9EA02BE0E99EF1
Content-Type: text/plain; charset=us-ascii; name="dmesg.boot"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="dmesg.boot"
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-RELEASE #0: Mon Mar 29 21:01:50 BST 1999
richard@notebook.wan:/usr/src/sys/compile/NOTEBOOK
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (120.27-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 41943040 (40960K bytes)
avail memory = 37548032 (36668K bytes)
Preloaded elf kernel "kernel" at 0xf0340000.
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=1060 device=e891)> rev 0xb0 on pci0.0.0
vga0: <Chips & Technologies model 00dc VGA-compatible display device> rev 0x00 on pci0.17.0
chip1: <PCI to ISA bridge (vendor=1060 device=e886)> rev 0xb2 on pci0.18.0
ide_pci0: <PCI IDE controller (busmaster capable)> rev 0x10 on pci0.18.1
pcic0: <Cirrus Logic PD6729/6730 PC-Card Controller> rev 0xfe int a irq 255 on pci0.23.0
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 not found at 0x2f8
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <TOSHIBA MK1926FCV>
wd0: 777MB (1591632 sectors), 1579 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-1302B/2865>, removable, intr, iordis
acd0: drive speed 689KB/sec, 128KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ppc0 at 0x378 irq 7 on isa
ppc0: SMC FDC37C665GT chipset (PS2/NIBBLE) in COMPATIBLE mode
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
cs0 not found at 0x300
adv0 not found at 0x330
bt0 not found at 0x134
aha0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Initializing PC-card drivers: ed
Intel Pentium detected, installing workaround for F00F bug
changing root device to wd0s1a
--------------9D85A18EBC9EA02BE0E99EF1--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3701CF8B.6A4D91F5>