Date: Mon, 21 Mar 2016 16:13:37 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-bugs@FreeBSD.org Subject: [Bug 208183] not booting with SATA drive connected: still waiting after 300 seconds for xpt_config Message-ID: <bug-208183-8@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D208183 Bug ID: 208183 Summary: not booting with SATA drive connected: still waiting after 300 seconds for xpt_config Product: Base System Version: 10.2-RC2 Hardware: Any OS: Any Status: New Severity: Affects Only Me Priority: --- Component: kern Assignee: freebsd-bugs@FreeBSD.org Reporter: marc.arnold.bach@gmail.com Hello, I installed a 10.3 RC2 UFEI encrypted ZFS System on a Supermicro X11SSH-LN4F Board with a PCIe SSD directly connected to M.2 Port. This works fine in UEFI Mode... After having base system up I plugged in a 8TB WD Disk in a "Mobile Rack Drawer". The Mainboard was in hotplug mode, OS has seen new device and I configured a ZFS pool... Unfortunately the machine is not booting anymore. It asks for a password for ZFS pool but what every I type in it is not reacting anymore. Something else has locked the machine already and simple counts seconds: still waiting after 30 seconds for xpt_config still waiting after 60 seconds for xpt_config still waiting after 300 seconds for xpt_config I switched off hotplug mode: not booting If I remove the drive: system boots normally.... I replaced WD 8TB disk by an older Samsung 320GB drive: not booting I connected drive to different SATA port: not booting I removed SATA disks agin; booting As I never cross the point of uncrypting / filesystem I have no dmesg from this... but I created a video with supermicro's IPMI and was not lazy and copied it by hand. This is all suspicious what I found in bootmessages: acpi: <SUPERM SuperM> on motherboard ACPI Error: [?_SB_.PCIO.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FO= UND (20150515/dswload-219) ACPI Exception: AE_NOT_FOUND, During name lookup, catalog (20150515/psobect-233) acpi0: Power Button (fixed) ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported I have no port multiplier in place . Marc... Regards Marc --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-208183-8>