Date: Fri, 10 Mar 2006 07:20:11 GMT From: =?ISO-8859-1?Q?S=F8ren_Schmidt?= <sos@deepcore.dk> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/93885: ata(4) failure: SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !! Message-ID: <200603100720.k2A7KBcI093002@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/93885; it has been noted by GNATS. From: =?ISO-8859-1?Q?S=F8ren_Schmidt?= <sos@deepcore.dk> To: Alexander Logvinov <lightsquid@logvinov.com> Cc: bug-followup@FreeBSD.ORG, sos@FreeBSD.ORG Subject: Re: kern/93885: ata(4) failure: SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !! Date: Fri, 10 Mar 2006 08:11:23 +0100 Alexander Logvinov wrote: > Hello. > > Iwill DBS100 Rev 2.2 + FastTrak TX2300 > FreeBSD 6.1-PRERELEASE #0: Sun Mar 5 01:41:09 YAKT 2006 > /src/sys/dev/ata/ata-all.c,v 1.252.2.6 Hmm, does it work if you disable ACPI ? If that still fails try to backstep /sys/dev/ata to say 6.0-RELEASE and see if that makes it run smoothly. Anyhow, the tx2300 works fine in all the boards I've tried here.... -Søren > > It comes even worse: > > ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly > ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly > ad4: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly > ad4: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly > ad4: WARNING - SET_MULTI taskqueue timeout - completing request directly > ad4: FAILURE - READ_DMA timed out LBA=84048063 > ar0: WARNING - mirror protection lost. RAID1 array in DEGRADED mode > ad4: WARNING - WRITE_DMA taskqueue timeout - completing request directly > ad6: WARNING - WRITE_DMA taskqueue timeout - completing request directly > ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly > ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly > ad6: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly > ad6: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly > ad6: WARNING - SET_MULTI taskqueue timeout - completing request directly > ad6: FAILURE - WRITE_DMA timed out LBA=50807807 > ar0: FAILURE - RAID1 array broken > ad4: WARNING - WRITE_DMA taskqueue timeout - completing request directly > ad6: WARNING - WRITE_DMA taskqueue timeout - completing request directly > g_vfs_done():ar0s1d[WRITE(offset=26013564928, length=16384)]error = 5 > ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly > ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly > ad4: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly > ad4: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly > ad4: WARNING - SET_MULTI taskqueue timeout - completing request directly > ad4: FAILURE - WRITE_DMA timed out LBA=50807807 > ad4: WARNING - WRITE_DMA taskqueue timeout - completing request directly > ad6: WARNING - WRITE_DMA taskqueue timeout - completing request directly > ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly > > # atacontrol status ar0 > ar0: ATA RAID1 subdisks: ad4 ad6 status: BROKEN >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200603100720.k2A7KBcI093002>