Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 23 May 2013 18:09:43 -0700
From:      Jeremy Chadwick <jdc@koitsu.org>
To:        "Michael L. Squires" <mikes@siralan.org>
Cc:        YongHyeon PYUN <pyunyh@gmail.com>, Craig Rodrigues <rodrigc@crodrigues.org>, freebsd-stable@freebsd.org, FreeBSD Release Engineering Team <re@freebsd.org>, Glen Barber <gjb@freebsd.org>
Subject:   Re: Apparent fxp regression in FreeBSD 8.4-RC3
Message-ID:  <20130524010943.GA37252@icarus.home.lan>
In-Reply-To: <alpine.BSF.2.00.1305232013110.14717@familysquires.net>
References:  <20130508174721.GD1651@glenbarber.us> <alpine.BSF.2.00.1305112240040.1240@familysquires.net> <CAG=rPVf0W2U4OwRUzVB5TgVVX%2BAD44VL1fBCtLMiqtDSL%2Bg4Vg@mail.gmail.com> <alpine.BSF.2.00.1305161103370.1222@familysquires.net> <alpine.BSF.2.00.1305232013110.14717@familysquires.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, May 23, 2013 at 08:18:33PM -0400, Michael L. Squires wrote:
> I've just tested 8.4-RC3 using a different Supermicro 1U box with a fresh
> installation of 8.4-RC3.  I had problems with the installation, wouldn't
> boot until I used a Windows 98 FDISK to write a master boot record
> (no idea why; this system uses an Adaptec SATA 1.5 6-channel PCI-X
> board with two
> drives in RAID 1).
> 
> Using the em0 interface there are no problems with DHCP; when I
> switch to the fxp0 interface the interface starts going up/down in
> the same manner as reported.
> 
> The problem appears associated with "world", not with the kernel (running
> the 8.4 kernel with the 8.3 world does not have this problem).
> 
> This motherboard is an X5DPL-iGM with 2 Xeon 2.8GHz CPUs and 4 GB of RAM.
> The other unit (an earlier board) has a Serverworks chipset with a single
> Xeon CPU but also with a 100Mbit Intel Pro100 Ethernet port and a 1000Mbit
> Intel Pro1000 Ethernet port.
> 
> This unit isn't doing anything useful, so testing isn't a problem.

Mike, Yong-Hyeon asked you a very important question which you didn't
answer:

http://lists.freebsd.org/pipermail/freebsd-stable/2013-May/073458.html

If you assign a static IP address, does fxp0 behave properly?

I'm also re-adding Yong-Hyeon to the CC list here.

-- 
| Jeremy Chadwick                                   jdc@koitsu.org |
| UNIX Systems Administrator                http://jdc.koitsu.org/ |
| Mountain View, CA, US                                            |
| Making life hard for others since 1977.             PGP 4BD6C0CB |



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20130524010943.GA37252>