Date: Mon, 3 May 2010 16:37:27 -0300 (ADT) From: "Marc G. Fournier" <freebsd@hub.org> To: freebsd-net@freebsd.org Subject: 6-STABLE + zebra == Can't bind to stream socket Message-ID: <alpine.BSF.2.00.1005031635470.85296@hub.org>
next in thread | raw e-mail | index | archive | help
In order to deal with a lack of layer 3 switch, last week I installed Quagga/OSPF on all of my servers, and got it configured. Works *great* on my 7.x servers, but, using the same config (and port), my 6-STABLE boxes all generate the same error when I try and start up zebra: 2010/05/01 01:44:18 ZEBRA: Can't bind to stream socket: Can't assign requested address 2010/05/01 01:44:18 ZEBRA: zebra can't provice full functionality due to above error 2010/05/01 01:44:18 ZEBRA: Zebra 0.99.15 starting: vty@2601 So ospfd isn't able to announce / receive routes ... My zebra.conf file looks like: ! interface em0 no shutdown ip address 200.46.204.60/24 ! interface em1 ! interface lo0 ! ip route 0.0.0.0/0 200.46.208.1 ! ip forwarding ! line vty The top bit of ifconfig shows: ifconfig em0 | less em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> inet 200.46.204.60 netmask 0xffffff00 broadcast 200.46.204.255 inet 200.46.208.60 netmask 0xffffff00 broadcast 200.46.208.255 inet 192.168.1.7 netmask 0xffffff00 broadcast 192.168.1.255 inet 200.46.204.183 netmask 0xffffffff broadcast 200.46.204.183 Other then appropriate interface/IP on the 7-STABLE boxes, the 7-STABLE boxes all work fine ... is there an issue with em/fxp devices and zebra on 6-STABLE/i386? Or am I overlooking something in my config? Thx ...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1005031635470.85296>