Date: Fri, 9 Apr 2004 00:25:21 -0400 From: Jason Lixfeld <jason+lists.freebsd@lixfeld.ca> To: Tilman Linneweh <tilman+2004-04-08@arved.at> Cc: freebsd-amd64@FreeBSD.org Subject: Re: Anyone using AMD64 + FreeBSD + openldap? (was: openldap-2.1.27 - Message-ID: <E9C69392-89DD-11D8-B3A5-000A95989E4A@lixfeld.ca> In-Reply-To: <20040408210939.GA79932@arved.at> References: <1136DB62-8983-11D8-9A25-000A95989E4A@lixfeld.ca> <20040408210939.GA79932@arved.at>
next in thread | previous in thread | raw e-mail | index | archive | help
On Apr 8, 2004, at 5:09 PM, Tilman Linneweh wrote:
> * Jason Lixfeld [Do, 08 Apr 2004 at 19:35 GMT]:
>>> I use OpenLDAP 2.2/back-bdb/bdb 4.2.52+patches on RELENG_4.
>>> I don't see such problems. I just now starting to toy with
>>> RELENG_5_2.
>>
>> What hardware are you using? I can't run BDB because of AMD64 issues
>> with fast mutexes so I'm using ldbm instead.
>>
>>> I also note that I haven't had any problems using db_recover
>>> to recover from hard crashes.
>>
>> Again, this would be fine if I could run BDB.
>
> Matthias Andree suggested, a possible workaround to the problems with
> the fast mutexes may be to add --with-mutex=x86/gcc-assembly to the
> CONFIGURE_ARGS.
I'm using ports, so I added that to the Makefile in two locations. I
also noted that the configure script didn't seem to have an option for
--with-mutex when I ran ./configure --help. Modified Makefile is
below.
su-2.05b# cat Makefile
# New ports collection makefile for: openldap22-server
# Date created: 10 Jul 2003
# Whom: Oliver Eikemeier
#
# $FreeBSD: ports/net/openldap22-server/Makefile,v 1.89 2004/03/31
22:33:09 eik Exp $
#
PORTNAME= openldap
PORTVERSION= 2.2.8
PORTREVISION= ${OPENLDAP_PORTREVISION}
CATEGORIES= net databases
MASTER_SITES= ftp://ftp.OpenLDAP.org/pub/OpenLDAP/%SUBDIR%/ \
http://public.planetmirror.com/pub/openldap/%SUBDIR%/ \
ftp://gd.tuwien.ac.at/infosys/network/OpenLDAP/%SUBDIR%/ \
ftp://ftp.matrix.com.br/pub/openldap/%SUBDIR%/ \
ftp://ftp.ucr.ac.cr/pub/Unix/openldap/%SUBDIR%/
\
ftp://ftp.ntua.gr/mirror/OpenLDAP/%SUBDIR%/ \
ftp://ftp.shellhung.org/pub/OpenLDAP/%SUBDIR%/ \
ftp://ftp.dti.ad.jp/pub/net/OpenLDAP/%SUBDIR%/ \
ftp://ftp.u-aizu.ac.jp/pub/net/openldap/%SUBDIR%/ \
ftp://ftp.holywar.net/pub/OpenLDAP/%SUBDIR%/ \
ftp://ftp.nl.uu.net/pub/unix/db/openldap/%SUBDIR%/ \
ftp://ftp.linux.pt/pub/mirrors/OpenLDAP/%SUBDIR%/ \
ftp://ftp.rediris.es/mirror/OpenLDAP/%SUBDIR%/ \
ftp://sunsite.cnlab-switch.ch/mirror/OpenLDAP/%SUBDIR%/ \
http://openldap.cdpa.nsysu.edu.tw/OpenLDAP/%SUBDIR%/ \
ftp://ftp.plig.org/pub/OpenLDAP/%SUBDIR%/
MASTER_SITE_SUBDIR= openldap-release
PKGNAMESUFFIX= ${OPENLDAP_PKGNAMESUFFIX}
EXTRACT_SUFX= .tgz
MAINTAINER= eik@FreeBSD.org
COMMENT?= Open source LDAP server implementation
LATEST_LINK= ${PKGNAMEPREFIX}openldap22${PKGNAMESUFFIX}
WANT_OPENLDAP_VER?= 22
.if ${WANT_OPENLDAP_VER} != 22
BROKEN= "incompatible OpenLDAP version:
${WANT_OPENLDAP_VER}"
.endif
PORTREVISION_CLIENT= 0
PORTREVISION_SERVER= 0
PKGNAMESUFFIX_CLIENT= -client
PKGNAMESUFFIX_SERVER= -server
.if defined(CLIENT_ONLY)
OPENLDAP_PORTREVISION= ${PORTREVISION_CLIENT}
OPENLDAP_PKGNAMESUFFIX= ${PKGNAMESUFFIX_CLIENT}
OPENLDAP_PKGFILESUFX= .client
CONFLICTS= ${PKGNAMEPREFIX}${PORTNAME}-client-2.[013-9].* \
${PKGNAMEPREFIX}${PORTNAME}-sasl-client-2.[013-9].*
.if !defined(NOPORTDOCS)
PORTDOCS= drafts rfc
.endif
.if defined(USE_OPENLDAP)
.error You have `USE_OPENLDAP' defined either in your environment or in
make(1) arguments.
.endif
.else
OPENLDAP_PORTREVISION= ${PORTREVISION_SERVER}
OPENLDAP_PKGNAMESUFFIX= ${PKGNAMESUFFIX_SERVER}
OPENLDAP_PKGFILESUFX=
RUN_DEPENDS=
${LOCALBASE}/lib/libldap.so.202:${PORTSDIR}/net/openldap22-client
#RUN_DEPENDS=
${LOCALBASE}/lib/libldap-2.2.so.7:${PORTSDIR}/net/openldap22-client
CONFLICTS+= ${PKGNAMEPREFIX}${PORTNAME}-server-2.[013-9].* \
${PKGNAMEPREFIX}${PORTNAME}-sasl-server-2.[013-9].*
.if ${PORTREVISION_CLIENT} != 0
SUF1_CLIENT= _${PORTREVISION_CLIENT}
.endif
PKGNAME_CLIENT=
${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX_CLIENT}-
${PORTVERSION}${SUF1_CLIENT}
.endif
USE_OPENSSL= yes
USE_REINPLACE= yes
GNU_CONFIGURE= yes
DESCR= ${PKGDIR}/pkg-descr${OPENLDAP_PKGFILESUFX}
PLIST= ${PKGDIR}/pkg-plist${OPENLDAP_PKGFILESUFX}
PKGINSTALL= ${WRKDIR}/pkg-install
PKGMESSAGE= ${WRKDIR}/pkg-message
PKGDEINSTALL= ${WRKDIR}/pkg-deinstall
SCHEMATA= corba core cosine \
dyngroup inetorgperson java \
misc nis openldap
LDAP_RUN_DIR?= ${DESTDIR}/var/run/openldap
LOCALSTATEDIR?= ${DESTDIR}/var/db
DATABASEDIR?= ${LOCALSTATEDIR}/openldap-data
SLURPDIR?= ${LOCALSTATEDIR}/openldap-slurp
PLIST_SUB+= LDAP_RUN_DIR=${LDAP_RUN_DIR} \
DATABASEDIR=${DATABASEDIR} \
SLURPDIR=${SLURPDIR} \
SED_SCRIPT= -e 's,%%PKGNAME%%,${PKGNAME},g' \
-e 's,%%PREFIX%%,${PREFIX},g' \
-e 's,%%LDAP_RUN_DIR%%,${LDAP_RUN_DIR},g' \
-e 's,%%DATABASEDIR%%,${DATABASEDIR},g' \
-e 's,%%SLURPDIR%%,${SLURPDIR},g'
CONFIGURE_ARGS= --with-threads=posix \
--with-tls=openssl \
--enable-dynamic \
--with-mutex=x86/gcc-assembly
.if defined(WITH_SASL)
PKGNAMESUFFIX_CLIENT:= -sasl${PKGNAMESUFFIX_CLIENT}
PKGNAMESUFFIX_SERVER:= -sasl${PKGNAMESUFFIX_SERVER}
LIB_DEPENDS+= sasl2.2:${PORTSDIR}/security/cyrus-sasl2
CONFIGURE_ARGS+= --with-cyrus-sasl
.else
CONFIGURE_ARGS+= --without-cyrus-sasl
.endif
.if defined(CLIENT_ONLY)
# client specific configuration
CONFIGURE_ARGS+= --disable-slapd
INSTALLS_SHLIB= yes
.else
# server specific configuration
USE_RC_SUBR= yes
SED_SCRIPT+= -e 's,%%PKGNAME_CLIENT%%,${PKGNAME_CLIENT},g' \
-e 's,%%RC_SUBR%%,${RC_SUBR},g' \
-e 's,%%RC_DIR%%,${RC_DIR},g' \
-e 's,%%RC_SUFX%%,${RC_SUFX},g'
PLIST_SUB+= RC_DIR=${RC_DIR} \
RC_SUFX=${RC_SUFX}
EXTRA_PATCHES+= ${FILESDIR}/extrapatch-Makefile.in
CONFIGURE_ARGS+= --localstatedir=${LOCALSTATEDIR} \
--enable-ldbm \
--enable-crypt \
--enable-lmpasswd \
--enable-ldap \
--enable-meta \
--enable-rewrite \
--enable-null \
--enable-monitor \
--with-mutex=x86/gcc-assembly
.if defined(WITHOUT_BDB)
CONFIGURE_ARGS+= --with-ldbm-api=bcompat \
--disable-bdb
.else
WITH_BDB_VER?= 42
.if ${WITH_BDB_VER} == 42
CONFIGURE_ARGS+= --enable-bdb
BDBLIB= db-4.2.2
.elif ${WITH_BDB_VER} == 41
CONFIGURE_ARGS+= --enable-bdb
BDBLIB= db41.1
.elif ${WITH_BDB_VER} == 4
CONFIGURE_ARGS+= --disable-bdb
BDBLIB= db4.0
.elif ${WITH_BDB_VER} == 3
CONFIGURE_ARGS+= --disable-bdb
BDBLIB= db3.3
.else
.error WITH_BDB_VER must be 3, 4, 41 or 42
.endif
LIB_DEPENDS+=
${BDBLIB}:${PORTSDIR}/databases/db${WITH_BDB_VER}
CPPFLAGS+= -I${LOCALBASE}/include/db${WITH_BDB_VER}
CONFIGURE_ARGS+= --with-ldbm-api=berkeley \
--enable-hdb
CONFIGURE_SED+= -e 's,ol_DB_LIB=$$,&-l${BDBLIB:R},' \
-e 's,(ol_cv_lib_db=)yes$$,\1-l${BDBLIB:R},'
.endif
.if defined(WITH_SHELL)
CONFIGURE_ARGS+= --enable-shell
.endif
.if defined(WITH_PERL)
USE_PERL5= yes
CONFIGURE_ARGS+= --enable-perl
.endif
.if defined(WITH_SASL)
CONFIGURE_ARGS+= --enable-spasswd
.endif
.if defined(WITH_ODBC)
WITH_ODBC_TYPE?= iODBC
.endif
.if defined(WITH_ODBC_TYPE)
CONFIGURE_ARGS+= --enable-sql
.if ${WITH_ODBC_TYPE:L} == iodbc
LIB_DEPENDS+= iodbc.3:${PORTSDIR}/databases/libiodbc
.elif ${WITH_ODBC_TYPE:L} == unixodbc
LIB_DEPENDS+= odbc.1:${PORTSDIR}/databases/unixODBC
.else
.error WITH_ODBC_TYPE must be iODBC or unixODBC
.endif
.endif
.if defined(WITH_SLAPI)
LIB_DEPENDS+= ltdl.4:${PORTSDIR}/devel/libltdl
CONFIGURE_ARGS+= --enable-slapi \
--enable-modules
PLIST_SUB+= SLAPI=""
INSTALLS_SHLIB= yes
.else
PLIST_SUB+= SLAPI="@comment "
.endif
# Include tcp-wrapper support
.if !defined(WITHOUT_TCP_WRAPPERS) && exists(/usr/include/tcpd.h)
CONFIGURE_ARGS+= --enable-wrappers
.endif
# end of client/server specific configuration
.endif
CPPFLAGS+= ${PTHREAD_CFLAGS} \
-I${LOCALBASE}/include
LDFLAGS+= -L${LOCALBASE}/lib
#LIBS+= ${PTHREAD_LIBS}
CONFIGURE_TARGET= --build=${MACHINE_ARCH}-portbld-freebsd${OSREL}
CONFIGURE_ENV= CPPFLAGS="${CPPFLAGS}" \
LDFLAGS="${LDFLAGS}" \
LIBS="${LIBS}"
.include <bsd.port.pre.mk>
.if defined(CLIENT_ONLY)
.include "${FILESDIR}/manpages"
.else
.if ${OSVERSION} >= 500038
RC_DIR= ${DESTDIR}/etc/rc.d
RC_SUFX=
.else
RC_DIR= ${PREFIX}/etc/rc.d
RC_SUFX= .sh
.endif
.endif
pre-everything::
@${ECHO}
"============================================================="
@${ECHO}
@${ECHO} "You can build ${PKGNAME} with the following options:"
@${ECHO}
.if defined(CLIENT_ONLY)
@${ECHO} "WITH_SASL with (Cyrus) SASL2 support"
.else
@${ECHO} "WITH_BDB_VER select BerkeleyDB version
(default 42)"
@${ECHO} "WITH_SASL with (Cyrus) SASL2 password
verification"
@${ECHO} "WITH_PERL with Perl backend"
@${ECHO} "WITH_SHELL with Shell backend"
@${ECHO} "WITH_ODBC with SQL backend"
@${ECHO} "WITH_ODBC_TYPE select ODBC interface (iODBC or
unixODBC)"
@${ECHO} "WITH_SLAPI with Netscape SLAPI plugin API
@${ECHO} "WITHOUT_TCP_WRAPPERS without tcp wrapper support"
@${ECHO} "WITHOUT_BDB without BerkeleyDB support"
.endif
@${ECHO}
@${ECHO}
"============================================================="
@${ECHO}
post-patch:
@${REINPLACE_CMD} -e
's,%LOCALSTATEDIR%/run/,${LDAP_RUN_DIR}/,g' \
${WRKSRC}/servers/slapd/slapd.conf
.if defined(CONFIGURE_SED)
@${REINPLACE_CMD} -E ${CONFIGURE_SED} \
${CONFIGURE_WRKSRC}/${CONFIGURE_SCRIPT}
.endif
pre-configure:
@if [ -n "`${PKG_INFO} -xI '^bind\(84\)\{0,1\}-base-8\.'
2>/dev/null`" ]; then \
${ECHO_CMD} "${PKGNAME}: bind installed with
PORT_REPLACES_BASE_BIND causes build problems."; \
${FALSE}; \
fi
post-build:
.for script in slapd slurpd
@${SED} ${SED_SCRIPT} ${FILESDIR}/${script}.sh
>${WRKDIR}/${script}.sh
.endfor
.for text in pkg-install pkg-message pkg-deinstall
@if [ -f ${PKGDIR}/${text}${OPENLDAP_PKGFILESUFX} ]; then \
${SED} ${SED_SCRIPT}
${PKGDIR}/${text}${OPENLDAP_PKGFILESUFX} \
>${WRKDIR}/${text}; \
fi
.endfor
.if !defined(CLIENT_ONLY)
test: build
@cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} \
${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} test
.endif
pre-install:
@if [ -f ${PKGINSTALL} ]; then \
${SETENV} "PKG_PREFIX=${PREFIX}" ${SH} ${PKGINSTALL}
${PKGNAME} PRE-INSTALL; \
fi
post-install:
.if defined(CLIENT_ONLY)
.if !defined(NOPORTDOCS)
@${MKDIR} ${DOCSDIR}
@for dir in drafts rfc; do \
${MKDIR} ${DOCSDIR}/$${dir}; \
${INSTALL_DATA} ${WRKSRC}/doc/$${dir}/*
${DOCSDIR}/$${dir}; \
done
.endif
.else
@for schema in ${SCHEMATA}; do \
${ECHO_CMD} "@unexec if cmp -s
%D/etc/openldap/schema/$${schema}.schema" \
"%D/etc/openldap/schema/$${schema}.schema.default; then" \
"rm -f
%D/etc/openldap/schema/$${schema}.schema; fi" >>${TMPPLIST}; \
${ECHO_CMD}
"etc/openldap/schema/$${schema}.schema.default" >>${TMPPLIST}; \
${ECHO_CMD} "@exec [ -f %B/$${schema}.schema ] || cp
%B/%f %B/$${schema}.schema" >>${TMPPLIST}; \
done
@${ECHO_CMD} "@unexec rmdir %D/etc/openldap/schema 2>/dev/null
|| true" >>${TMPPLIST}
@${ECHO_CMD} "@unexec rmdir %D/etc/openldap 2>/dev/null ||
true" >>${TMPPLIST}
# currently the only way to participate in rcorder(8)
@if [ "${RC_DIR}" != "${PREFIX}" ]; then \
${ECHO_CMD} "@cwd ${RC_DIR}" >>${TMPPLIST}; \
fi
.for script in slapd slurpd
@${INSTALL_SCRIPT} ${WRKDIR}/${script}.sh
${RC_DIR}/${script}${RC_SUFX}
@${ECHO_CMD} "${script}${RC_SUFX}" >>${TMPPLIST}
.endfor
@${MKDIR} ${LDAP_RUN_DIR}
.endif
@${CAT} ${PKGMESSAGE}
.include <bsd.port.post.mk>
su-2.05b#
> Can you test, if this fixes your problems?
Unless I'm doing something wrong, that doesn't seem to help. Have I
done something wrong?
su-2.05b# /usr/local/libexec/slapd -d 256
@(#) $OpenLDAP: slapd 2.2.8 (Apr 9 2004 00:19:49) $
jlixfeld@foobar.foo.bar:/usr/ports/net/openldap22-server/work/openldap
-2.2.8/servers/slapd
bdb_initialize: Sleepycat Software: Berkeley DB 4.2.52: (December 3,
2003)
bdb_initialize: Sleepycat Software: Berkeley DB 4.2.52: (December 3,
2003)
bdb_db_init: Initializing BDB database
bdb(dc=ebit,dc=ca): architecture lacks fast mutexes: applications
cannot be threaded
bdb_db_open: dbenv_open failed: Invalid argument (22)
backend_startup: bi_db_open(0) failed! (22)
bdb(dc=ebit,dc=ca): txn_checkpoint interface requires an environment
configured for the transaction subsystem
bdb_db_destroy: txn_checkpoint failed: Invalid argument (22)
slapd stopped.
connections_destroy: nothing to destroy.
> regards
> tilman
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E9C69392-89DD-11D8-B3A5-000A95989E4A>