Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 17 May 2002 22:54:53 +0100 (BST)
From:      Gavin Atkinson <gavin@ury.york.ac.uk>
To:        <stable@freebsd.org>
Subject:   Panic on bootup on 4.6-RC1
Message-ID:  <Pine.BSF.4.33.0205172247160.27947-100000@ury.york.ac.uk>

next in thread | raw e-mail | index | archive | help
Hi all,

Fresh install of the bin/ distribution alone onto a P3-700 box... Hadn't
even got around to recompiling the kernel, so no debugging info.

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RC1 #0: Thu May 16 12:30:27 GMT 2002
    root@storm.FreeBSD.org.uk:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (751.71-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 536608768 (524032K bytes)
avail memory = 517234688 (505112K bytes)
pnpbios: Bad PnP BIOS data checksum
Preloaded elf kernel "kernel" at 0xc04ca000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00f2bb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x440-0x44f at device 7.3 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xef00-0xef3f mem 0xff900000-0xff9fffff,0xffafa000-0xffafafff irq 5 at device 12.0 on pci0
fxp0: Ethernet address 00:02:b3:19:dd:28
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xee80-0xeebf mem 0xff700000-0xff7fffff,0xffaf9000-0xffaf9fff irq 5 at device 13.0 on pci0
fxp1: Ethernet address 00:02:b3:19:dd:29
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 29160B Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xffafb000-0xffafbfff irq 11 at device 15.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
orm0: <Option ROMs> at iomem
0xce800-0xcf7ff,0xcf800-0xd07ff,0xdc000-0xdffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
RTC BIOS diagnostic error 20<config_unit>
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS_V__9_WLS 0230> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 8755MB (17930694 512 byte sectors: 255H 63S/T 1116C)
swapon: adding /dev/da0s1b as swap device
Automatic boot in progress...
/dev/da0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1a: clean, 48017 free (633 frags, 5923 blocks, 1.0% fragmentation)
/dev/da0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s1f: clean, 128997 free (13 frags, 16123 blocks, 0.0% fragmentation)
/dev/da0s1g: FILmESYSTEM CLEAN; SoKIPPING CHECKS
d/dev/da0s1g: cleean, 3370833 free  (5969 frags, 42=0608 blocks, 0.2 % fragmentation)0
4/dev/da0s1e: FIL1ESYSTEM CLEAN; S7KIPPING CHECKS
7/dev/da0s1e: cle7an, 302255 free ,(7 frags, 37781  blocks, 0.0% fraigmentation)

num = 28, fs = /var
panic: ffs_valloc: dup alloc

syncing disks... 4 1
done
Uptime: 19s

Notice the corruption visible in the fsck output. THat was copy-and-pasted
from the serial console as-was. The box rebooted and came up fine.

Gavin


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.33.0205172247160.27947-100000>