Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 19 Apr 2002 06:41:12 -0000
From:      "stupid" <stupid@unixexpress.org>
To:        <hardware@freebsd.org>
Cc:        <hackers@freebsd.org>
Message-ID:  <017b01c1e76d$35f191c0$1700a8c0@gecko>

next in thread | raw e-mail | index | archive | help
listers,

I have a old puter DIGITAL CELEBRIS XL5133 / p133dual ( not the alpha
upgrade ) which is being
used for a gateway machine, I have yet to  revert back to using
Freebsd due to a minor SCSI CD problem, I have tried to Install
FreeBSD4.5rel  on this to no avail.
Due to the fact that FreeBSD installer would not detect my CDROM or would
often try to
( resetting all SCSI
devices ), Yes i could install FreeBSD using another puter and another
CDROM. ( in case there are
some wise crack monkeys around ) however I only have this problem with
FreeBSD.
OpenBSD, ( hold the flame ) and Linux distros such as Redhat and Slackware
give me
no such problems :)

if anyone could help me with my problem

siop0 at pci0 dev 1 function 0 "Symbios Logic 53c810" rev 0x02: irq 11,
siop0: scsi bus reset
scsibus0 at siop0: 8 targets
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, CD-ROM XM-5301TA, 1895> SCSI2
5/cdrom removable
siop0: target 6 now using 8 bit async xfers

thank you

listed below is my dmesg from :) my current OS running on the box

PS.  really need to get SMP support on this box

$ dmesg
OpenBSD 3.0-stable (ELENCHUS) #5: Wed Apr 17 06:18:17 GMT 2002
    root@stupid:/usr/src/sys/arch/i386/compile/ELENCHUS
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 114 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC
real mem  = 83472384 (81516K)
avail mem = 71962624 (70276K)
using 1044 buffers containing 4276224 bytes (4176K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(07) BIOS, date 11/30/95, BIOS32 rev. 0 @ 0xfbdcf
apm0 at bios0: Power Management spec V1.1
apm0: AC unknown, battery charge unknown, estimated 0:00 hours
pcibios0 at bios0: rev. 2.1 @ 0xfbc90/0x1270
pcibios0: PCI BIOS has 4 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 10 11 15
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000
pci0 at mainbus0 bus 0: configuration mode 2 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82434LX/NX PCI/Cache/DRAM" rev 0x11
siop0 at pci0 dev 1 function 0 "Symbios Logic 53c810" rev 0x02: irq 11,
siop0: scsi bus reset
scsibus0 at siop0: 8 targets
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, CD-ROM XM-5301TA, 1895> SCSI2
5/cdrom removable
siop0: target 6 now using 8 bit async xfers
pcib0 at pci0 dev 2 function 0 "Intel 82378IB PCI-ISA" rev 0x88
vga1 at pci0 dev 6 function 0 "Matrox MGA Millenium 2064W (Storm)" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xl0 at pci0 dev 7 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 10
address 00:a0:24:e0:48:36
nsphy0 at xl0 phy 24: DP83840 10/100 media interface, rev. 0
rl0 at pci0 dev 8 function 0 "Realtek 8139" rev 0x10: irq 15 address
00:c0:26:6f:51:ea
rlphy0 at rl0 phy 0: RTL internal phy
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <QUANTUM FIREBALL CR4.3A>
wd0: 16-sector PIO, LBA, 4110MB, 14848 cyl, 9 head, 63 sec, 8418816 sectors
wd0(wdc0:0:0): using BIOS timings
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4840 netmask cc40 ttymask ccc2
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
$




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?017b01c1e76d$35f191c0$1700a8c0>