Date: Wed, 15 Aug 2007 16:07:46 +0000 From: Mario Lobo <mario.lobo@ipad.com.br> To: freebsd-hackers@freebsd.org Cc: freebsd-questions@freebsd.org Subject: Re: IDE ultraDMA problem (hackers WAS via IDE controller problem) - SOLVED !! Message-ID: <200708151607.48696.mario.lobo@ipad.com.br> In-Reply-To: <200708141533.01594.jhb@freebsd.org> References: <200708111611.22644.mario.lobo@ipad.com.br> <200708141533.01594.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday 14 August 2007 19:33, John Baldwin wrote:
> On Saturday 11 August 2007 12:11:21 pm Mario Lobo wrote:
> > after a long,long search, I found that chip id 0x53371106 belongs to
> > SATA150 controller, not PATA !! Then I enabled all mass storage
> > controllers on the board ( although no SATA drives present ), then two
> > more ids showed up:
> >
> > chip=3D0x016a10de (jmicron SATA300)
> > chip=3D0x05711106 <- thats it !!
> >
> > Then I went iinto /usr/src/sys/dev/ata/ata-pci.h and changed the line
> >
> > from
> > #define ATA_VIA8237A 0x05911106
> > to
> > #define ATA_VIA8237A 0x05711106
> >
> > recompiled, install and BANG!
>
> 6.x already has support for this ID as:
>
> #define ATA_VIA82C571 0x05711106
>
> so you shouldn't have needed to change the code at all.
sounds right but it isn't.
Look at e the code from /usr/src/sys/dev/ata/ata-chpset.c
=2D-------------------------------------------------------------------------
if (pci_get_devid(dev) =3D=3D ATA_VIA82C571) {
if (!(idx =3D ata_find_chip(dev, ids, -99)))=20
return ENXIO;
}
else {
if (!(idx =3D ata_match_chip(dev, new_ids)))=20
return ENXIO;
}
=2D-------------------------------------------------------------------------
new_ids doesn't have an id for ATA_VIA8237A (ata-pci.h defines ATA_VIA8237A=
as=20
0x0591, which is not what my mobo gives out !) .
Besides, the VIA8237A SATA150 controllers ids itself as 0x5337, which is no=
t=20
even in the data base at http://pci-ids.ucw.cz/iii/?i=3D1106
So I added a new id to ata-pci.h:
#define ATA_VIA8237AS 0x53371106
and added this line to ata-chipset.c:
{ ATA_VIA8237AS, 0x00, 7, 0x00, ATA_SA150, "8237A" },
now, all my controllers get properly identified and work !.
my mobo is an ASUS P5VD2-X.
DEFINETLY ( at least for the mobo I have at home), the ids ARE:
5337 is for VT8237A SATA150
0571 is for VT8237A Bus Master IDE
016a is for=A0jmicron SATA300
And these ids are confirmed by the XP drivers downloade from ASUS!
Either ASUS played around with ids in this mobo or the database is screwed =
up.
=2D-=20
**********************************************************
//| //| Mario Lobo
// |// | http://www.ipad.com.br
// // ||||||| FreeBSD since 2.2.8 - 100% Rwindows-free
**********************************************************
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200708151607.48696.mario.lobo>