Date: Wed, 22 Nov 2000 20:54:34 -0500 From: Peter Lai <PeterL@resnet.uconn.edu> To: 'Stephen Krauth ' <stephenk@stephenk.com>, "'freebsd-questions@freebsd.org '" <freebsd-questions@freebsd.org> Subject: RE: Problems with LinkSys 10/100 nic && FBSD 4.1? Message-ID: <9F36E367710D474E9806AA393FE737FB019ECA@resnetnt.resnet.uconn.edu>
next in thread | raw e-mail | index | archive | help
hmm i have the same NIC (it's an LNE100TX) on a machine and i run 4.1.1-STABLE no problems whatsoever with it. I have the PCI version... yes dc0 is the correct driver...i get pretty much the same info... make sure your existing isa devices aren't conflicting with that irq etc etc. -----Original Message----- From: Stephen Krauth To: freebsd-questions@freebsd.org Sent: 11/22/2000 4:15 PM Subject: Problems with LinkSys 10/100 nic && FBSD 4.1? I can't remember the model name/number of the card I have but the dmesg info is below. This card is on my gateway machine, on the internal side of a NAT network and ever since I bought it to replace an old ISA 10bT card, I've had troubles. The NAT clients inside my network sometimes cannot see the gateway until I log onto the console of the gateway and ping the client. Ever seen this? Should I toss this card and buy another brand? dmesg: dc0: <ADMtek AN985 10/100BaseTX> port 0x6500-0x65ff mem 0xe1004000-0xe10043ff irq 10 at device 18.0 on pci0 uname: FreeBSD azazel.inside.killermartian.com 4.1-RELEASE FreeBSD 4.1-RELEASE #5: Mon Oct 9 10:46:11 PDT 2000 stephenk@beelzebub.inside.killermartian.com:/usr/src/sys/compile/AZAZEL i386 Steve K. U.F.O. - "For the feeler gauge in you." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9F36E367710D474E9806AA393FE737FB019ECA>