Date: 27 Sep 2008 23:21:00 +0200 From: "Arno J. Klaassen" <arno@heho.snv.jussieu.fr> To: stable@freebsd.org Cc: net@freebsd.org Subject: 7.1-PRERELEASE : bad network performance (nfe0) Message-ID: <wptzc1gu9v.fsf@heho.snv.jussieu.fr>
next in thread | raw e-mail | index | archive | help
Hello,
I've serious network performance problems on a HP Turion X2
based brand new notebook; I only used a 7-1Beta CD and
7-STABLE on this thing.
Scp-ing ports.tgz from a rock-stable 7-STABLE server to it gives :
# scp -p ports.tgz login@mv:/tmp/
ports.tgz 100% 98MB 88.7KB/s 18:49
(doing the same thing by copy from an nfs-mounted disk even
takes mores than an hour ...)
Doing a top(1) aside, just shows the box 100% idle :
PID USERNAME PRI NICE SIZE RES STATE C TIME WCPU COMMAND
12 root 171 ki31 0K 16K CPU0 0 38:55 100.00% idle: cpu0
11 root 171 ki31 0K 16K RUN 1 38:55 100.00% idle: cpu1
13 root -32 - 0K 16K WAIT 0 0:02 0.00% swi4: clock sio
29 root -68 - 0K 16K - 0 0:00 0.00% nfe0 taskq
34 root -64 - 0K 16K WAIT 1 0:00 0.00% irq23: atapci1
1853 root 8 0 7060K 1920K wait 0 0:00 0.00% sh
878 nono 44 0 8112K 2288K CPU1 1 0:00 0.00% top
884 root 8 - 0K 16K - 1 0:00 0.00% nfsiod 0
4 root -8 - 0K 16K - 1 0:00 0.00% g_down
16 root -16 - 0K 16K - 1 0:00 0.00% yarrow
46 root 20 - 0K 16K syncer 0 0:00 0.00% syncer
3 root -8 - 0K 16K - 0 0:00 0.00% g_up
30 root -68 - 0K 16K - 0 0:00 0.00% fw0_taskq
I tested :
Update Bios
ULE /4BSD
PREEMPTION on/off
PREEMPTION + IPI_PREEMPTION
hw.nfe.msi[x]_disable=1
All don't seem to matter to the problem.
I put two tcpdumps (server and client during another scp(1) ) on
http://bare.snv.jussieu.fr/temp/tcpdump-s1518.server
http://bare.snv.jussieu.fr/temp/tcpdump-s1518.client
I'm far from an expert on TCP/IP, but wireshark "expert info" shows
lots of sequences like :
TCP Previous segment lost
TCP Duplicate ACK 1
TCP Window update
TCP Duplicate ACK 2
TCP Duplicate ACK 3
TCP Duplicate ACK 4
TCP Duplicate ACK 5
TCP Fast retransmission (suspected)
TCP ...
TCP Out-of-Order segment
TCP ...
As usual, feel free to contact me for further info/tests.
Thanx, Arno
##### uname -a
FreeBSD mv 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #0: Fri Sep 26 15:06:07 CEST 2008 root@m39.scito.local:/usr/obj/usr/src/sys/PAVILLON amd64
##### pciconf -lcv (bits)
nfe0@pci0:0:6:0: class=0x020000 card=0x30cf103c chip=0x045010de rev=0xa3 hdr=0x00
vendor = 'Nvidia Corp'
device = 'MCP65 Ethernet'
class = network
subclass = ethernet
cap 01[44] = powerspec 2 supports D0 D1 D2 D3 current D0
##### dmesg -a
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-PRERELEASE #0: Fri Sep 26 15:06:07 CEST 2008
root@m39.scito.local:/usr/obj/usr/src/sys/PAVILLON
Timecounter "i8254" frequency 1193250 Hz quality 0
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-62 (2109.70-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x60f82 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
Cores per package: 2
usable memory = 3210813440 (3062 MB)
avail memory = 3104542720 (2960 MB)
ACPI APIC Table: <HP APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
ACPI Error (dsopcode-0671): Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.PMIO._CRS] (Node 0xffffff00011f50a0), AE_AML_BUFFER_LIMIT
ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPC0.PMIO._CRS] (Node 0xffffff00011f50a0), AE_AML_BUFFER_LIMIT
can't fetch resources for \\_SB_.PCI0.LPC0.PMIO - AE_AML_BUFFER_LIMIT
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x1d00-0x1dff at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <processor> at device 1.3 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xf2486000-0xf2486fff irq 18 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf2488000-0xf24880ff irq 17 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
ugen0: <QCM HP Webcam, class 239/2, rev 2.00/1.10, addr 2> on uhub1
nfe0: <NVIDIA nForce MCP65 Networking Adapter> port 0x30e0-0x30e7 mem 0xf2487000-0xf2487fff irq 20 at device 6.0 on pci0
miibus0: <MII bus> on nfe0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe0: Ethernet address: 00:1e:68:5a:d2:e1
nfe0: [FILTER]
pci0: <multimedia> at device 7.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci_link0: BIOS IRQ 15 for 7.5.INTA is invalid
pci_link1: BIOS IRQ 10 for 7.5.INTB is invalid
pci7: <ACPI PCI bus> on pcib1
fwohci0: <1394 Open Host Controller Interface> irq 9 at device 5.0 on pci7
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:24:1b:00:a1:b7:e8:00
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:24:1b:b7:e8:00
fwe0: Ethernet address: 02:24:1b:b7:e8:00
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:24:1b:00:a1:b7:e8:00 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x2550000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci7: <base peripheral> at device 5.1 (no driver attached)
pci7: <base peripheral> at device 5.2 (no driver attached)
pci7: <base peripheral> at device 5.3 (no driver attached)
pci7: <base peripheral> at device 5.4 (no driver attached)
atapci0: <nVidia nForce MCP65 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30c0-0x30cf at device 9.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia ATA controller> port 0x30f8-0x30ff,0x30ec-0x30ef,0x30f0-0x30f7,0x30e8-0x30eb,0x30d0-0x30df mem 0xf2484000-0xf2485fff irq 23 at device 10.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
ath0: <Atheros 5424/2424> mem 0xf2000000-0xf200ffff irq 16 at device 0.0 on pci3
ath0: [ITHREAD]
ath0: unable to attach hardware; HAL status 13
device_attach: ath0 attach returned 6
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci5: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> port 0x4000-0x407f mem 0xce000000-0xceffffff,0xd0000000-0xdfffffff,0xcc000000-0xcdffffff irq 19 at device 0.0 on pci5
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci9: <ACPI PCI bus> on pcib5
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (-72.6C)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
powernow1: <PowerNow! K8> on cpu1
orm0: <ISA Option ROMs> at iomem 0xcd800-0xcefff,0xdf000-0xdffff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acpi_tz0: _CRT value is absurd, ignored (-72.6C)
acd0: DVDR <TSSTcorp CDDVDW TS-L632N/0503> at ata0-master PIO4
ad4: 305245MB <FUJITSU MHZ2320BH G2 8909> at ata2-master UDMA33
GEOM_LABEL: Label for provider acd0 is iso9660/CDROM.
SMP: AP CPU #1 Launched!
GEOM_LABEL: Label for provider ad4s2 is ntfs/HP_RECOVERY.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?wptzc1gu9v.fsf>