Date: Wed, 03 Sep 2003 12:17:29 -0300 From: Alexandre Biancalana <ale@seudns.net> To: freebsd-questions@freebsd.org Subject: Re: emulators/vmware2 broken... Message-ID: <3F560609.1000702@seudns.net> In-Reply-To: <3F53B0F1.5020306@seudns.net> References: <3F53B0F1.5020306@seudns.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, Someone could help me with this !? Some advise !? Some place where can I find a solution !? Regards, Alexandre Alexandre Biancalana wrote: > Hi All, > > I'm fighting with the following problem to install emulators/vmware2. > > cc -O -pipe > -I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/include > -I/usr/ports/emulators/vmwa > e2/work/vmware-distrib/vmmon-only/common > -I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd > I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/export/include > -I/sys -I/usr/ports/emulators/vmwar > 2/work/vmware-distrib/vmmon-only/../vmnet-only/freebsd/ > -DCDEV_MAJOR_=200 -DSMP -DAPIC_IO -D_KERNEL -Wall -Wre > undant-decls -Wnested-externs -Wstrict-prototypes > -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual - > format-extensions -ansi -DKLD_MODULE -nostdinc -I- > -I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-onl > /include > -I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/common > -I/usr/ports/emulators/vmware2/wo > k/vmware-distrib/vmmon-only/freebsd > -I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/export/includ > > -I/sys > -I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/../vmnet-only/freebsd/ > -I. -I@ -I@/../inc > ude -I/usr/include -mpreferred-stack-boundary=2 -Wall > -Wredundant-decls -Wnested-externs -Wstrict-prototypes > Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual > -fformat-extensions -ansi -c /usr/ports/emulators/vmw > re2/work/vmware-distrib/vmmon-only/freebsd/hostif.c > /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c: > In function `FindMPN': > /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:184: > invalid operands to binary >> > /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:188: > invalid type argument of `una > y *' > /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c: > In function `HostIF_LookupUserMPN > : > /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:185: > warning: `pte' might be used > ninitialized in this function > /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c: > In function `HostIF_LockPage': > /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:185: > warning: `pte' might be used > ninitialized in this function > /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:185: > warning: `pte' might be used > ninitialized in this function > /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c: > In function `CheckFunc': > /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:185: > warning: `pte' might be used > ninitialized in this function > *** Error code 1 > > Stop in /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only. > *** Error code 1 > > Stop in /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only. > *** Error code 1 > > Stop in /usr/ports/emulators/vmware2/work/vmware-distrib. > *** Error code 1 > > Stop in /usr/ports/emulators/vmware2. > *** Error code 1 > > Stop in /usr/ports/emulators/vmware2. > > > That's my machine: > > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.9-PRERELEASE #0: Sat Aug 30 17:49:40 BRT 2003 > root@Cruel:/usr/src/sys/compile/Cruel > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 860884854 Hz > CPU: Intel Pentium III (860.88-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x686 Stepping = 6 > > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > > real memory = 268091392 (261808K bytes) > avail memory = 257105920 (251080K bytes) > Preloaded elf kernel "kernel" at 0xc03b5000. > Pentium Pro MTRR support enabled > md0: Malloc disk > Using $PIR table, 9 entries at 0xc00fbc30 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > agp0: <Intel 82820 host to AGP bridge> mem 0xf4000000-0xf7ffffff at > device 0.0 on pci0 > pcib1: <PCI to PCI bridge (vendor=8086 device=250f)> at device 1.0 on > pci0 > pci1: <PCI bus> on pcib1 > pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 9 > pcib2: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0 > pci2: <PCI bus> on pcib2 > xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem > 0xfbfffc00-0xfbfffc7f irq 5 at device 12.0 on pci2 > xl0: Ethernet address: 00:b0:d0:50:c9:a7 > miibus0: <MII bus> on xl0 > xlphy0: <3c905C 10/100 internal PHY> on miibus0 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device > 31.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <Intel 82801AA (ICH) USB controller> port 0xff80-0xff9f irq 11 > at device 31.2 on pci0 > usb0: <Intel 82801AA (ICH) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 10 > pcm0: <Intel ICH (82801AA)> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 10 at > device 31.5 on pci0 > pcm0: <Analog Devices AD1881 AC97 Codec> > orm0: <Option ROMs> at iomem 0xc0000-0xc97ff,0xc9800-0xcbfff on isa0 > pmtimer0 on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 > sio1: configured irq 3 not in bitmap of probed irqs 0 > ppc0: parallel port not found. > IP packet filtering initialized, divert enabled, rule-based forwarding > enabled, default to deny, unlimited logging > ad0: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata0-master UDMA66 > acd0: CDROM <LTN485> at ata1-master PIO4 > acd1: CD-RW <Hewlett-Packard CD-Writer Plus 9100> at ata1-slave PIO4 > > I cvsup'ed my ports tree today. Some sugestion/advise ?! > > Regards, > > Alexandre > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3F560609.1000702>