Date: Fri, 11 Jul 2014 18:10:23 +0200 From: Daniele Mazzotti <kappei84@gmail.com> To: Anthony Jenkins <Anthony.B.Jenkins@att.net>, takawata@init-main.com Cc: freebsd-acpi@freebsd.org Subject: Re: ACPI support - Freebsd 10 on Sony Vaio VPCCA3C5E Message-ID: <CAC=ypSULmXU2HBpG2gf2J=9_o-sLccECud%2Be9KUg6-ppz7phww@mail.gmail.com> In-Reply-To: <53BFCBF4.2090104@att.net> References: <CAC=ypSVopgcL82FpqJosmgFeRkeeevP0RG-GrAEZD2YQyi%2BPrg@mail.gmail.com> <53BF0546.70505@att.net> <CAC=ypSUe0_09pTMFsMKw4u3J=Kb8Q_uV0g6%2Bk_f2p1so3mnTgA@mail.gmail.com> <53BFCBF4.2090104@att.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi guys, thanks again for the support. @Takanori: here you go http://pastebin.com/F0a2mZP4 @Anthony: I will try to include the options in a custom kernel and compile it. As this is the first time after years I am compiling a custom kernel it will take a few time I guess. Just let me know if the output of the acpidump is of any help to you. Cheers, Daniele. 2014-07-11 13:35 GMT+02:00 Anthony Jenkins <Anthony.B.Jenkins@att.net>: > Hi Daniele, > > I was just going from acpi(4) man page; you'll likely have to build a new > kernel with 'options ACPI_DEBUG' added to your kernel config file, as I > don't know if it's even possible to turn on the logging I want at runtime. > > [ajenkins@ajenkins-hplaptop /usr/home/ajenkins]$ grep -i acpi > /usr/src/sys/amd64/conf/MYKERNEL > device acpi > options ACPI_DEBUG > > I also have an 'options ACPI_DMAR' , but I don't recognize that and you > don't need that to debug your battery. > > Anthony > > On 07/11/2014 01:58, Daniele Mazzotti wrote: > > Hello Anthony, > > > > thanks for the quick reply! I tried what you suggested. > > > > loader.conf: > > > > # Module for Windows Partition & Linux Mount > > fuse_load="YES" > > autoboot_delay="5" > > #acpi_sony_load="YES" > > > > # Debugging Symbols for ACPI > > debug.acpi.layer="ACPI_BATTERY" > > debug.acpi.level="ACPI_LV_ALL_EXCEPTIONS" > > debug.acpi.enable_debug_objects="1" > > > > sysctl hw.acpi.battery: > > > > hw.acpi.battery.life: -1 > > hw.acpi.battery.time: -1 > > hw.acpi.battery.state: 7 > > hw.acpi.battery.units: 1 > > hw.acpi.battery.info_expire: 5 > > > > log/messages: > > > > cat /var/log/messages | grep acpi > > > > Jul 11 07:30:47 Von-Neumann kernel: acpi0: <Sony> on motherboard > > Jul 11 07:30:47 Von-Neumann kernel: acpi_ec0: <Embedded Controller: GPE > > 0x17, ECDT> port 0x62,0x66 on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: cpu0: <ACPI CPU> on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: cpu1: <ACPI CPU> on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: cpu2: <ACPI CPU> on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: cpu3: <ACPI CPU> on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: hpet0: <High Precision Event Timer> > > iomem 0xfed00000-0xfed003ff on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: atrtc0: <AT realtime clock> port > > 0x70-0x77 irq 8 on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: attimer0: <AT timer> port > > 0x40-0x43,0x50-0x53 irq 0 on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: acpi_timer0: <24-bit timer at > > 3.579545MHz> port 0x408-0x40b on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: pcib0: <ACPI Host-PCI bridge> port > > 0xcf8-0xcff on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: battery0: <ACPI Control Method > Battery> > > on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: acpi_acad0: <AC Adapter> on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: acpi_lid0: <Control Method Lid > Switch> > > on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: acpi_button0: <Power Button> on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: acpi_tz0: <Thermal Zone> on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: acpi_tz1: <Thermal Zone> on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: atkbdc0: <Keyboard controller > (i8042)> > > port 0x60,0x64 irq 1 on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: acpi_sony0: <Sony notebook > controller> > > on acpi0 > > Jul 11 07:30:47 Von-Neumann kernel: acpi_sony0: PID 0 > > Jul 11 07:37:54 Von-Neumann kernel: acpi0: <Sony> on motherboard > > Jul 11 07:37:54 Von-Neumann kernel: acpi_ec0: <Embedded Controller: GPE > > 0x17, ECDT> port 0x62,0x66 on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: cpu0: <ACPI CPU> on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: cpu1: <ACPI CPU> on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: cpu2: <ACPI CPU> on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: cpu3: <ACPI CPU> on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: hpet0: <High Precision Event Timer> > > iomem 0xfed00000-0xfed003ff on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: atrtc0: <AT realtime clock> port > > 0x70-0x77 irq 8 on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: attimer0: <AT timer> port > > 0x40-0x43,0x50-0x53 irq 0 on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: acpi_timer0: <24-bit timer at > > 3.579545MHz> port 0x408-0x40b on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: pcib0: <ACPI Host-PCI bridge> port > > 0xcf8-0xcff on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: battery0: <ACPI Control Method > Battery> > > on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: acpi_acad0: <AC Adapter> on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: acpi_lid0: <Control Method Lid > Switch> > > on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: acpi_button0: <Power Button> on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: acpi_tz0: <Thermal Zone> on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: acpi_tz1: <Thermal Zone> on acpi0 > > Jul 11 07:37:54 Von-Neumann kernel: atkbdc0: <Keyboard controller > (i8042)> > > port 0x60,0x64 irq 1 on acpi0 > > > > It seems to me the verbose debugging is either not enabled (perhaps I > made > > some mistakes with the loader.conf) or the debug is really enabled but > > there is no special output on the wrong log file. Actually I am a bit > > puzzled as I am not a real expert "admin". I only enjoy getting my hands > on > > Unix on my desktop PC just for fun. > > > > However, do you think either I missed something or made anything wrong? > > I look forward to receiving from you. > > > > Cheers, > > Daniele. > > > > > > > > 2014-07-10 23:27 GMT+02:00 Anthony Jenkins <Anthony.B.Jenkins@att.net>: > > > >> On 07/10/2014 16:49, Daniele Mazzotti wrote: > >>> Hello there, > >>> > >>> it is been a while since I finished installing Freebsd 10 on my Sony > Vaio > >>> PC and resolving (or at least I am trying to) one by one, all the > >> problems > >>> this hardware is giving me. Actually I cannot find a solution to > >> correctly > >>> display the battery level on my laptop. If I unplug my PC from the > power > >>> and type 'sysctl hw.acpi.battery' this is the result I get: > >>> > >>> hw.acpi.battery.life: -1 > >>> hw.acpi.battery.time: -1 > >>> hw.acpi.battery.state: 7 > >>> hw.acpi.battery.units: 1 > >>> hw.acpi.battery.info_expire: 5 > >>> > >>> Moreover the suspend mode is giving me some problems as well, but this > >> has > >>> definitely a lower priority. > >>> > >>> I either tried to search for a solution on the FreeBSD Handook with no > >>> luck, and google the problem a little bit, but I could not find any > >>> valuable help. I would be really interested to investigate the problem > >>> further. Is there anyone who can help me out with this and tell me what > >>> pieces of information are needed to better understand the problem? > >> Try enabling the ACPI_BATTERY layer and ACPI_LV_ALL_EXCEPTIONS level in > >> /boot/loader.conf: > >> > >> debug.acpi.layer="ACPI_BATTERY" > >> debug.acpi.level="ACPI_LV_ALL_EXCEPTIONS" > >> debug.acpi.enable_debug_objects="1" # I assume this is how > you > >> turn on ACPI debugging without recompiling the kernel with 'options > >> ACPI_DEBUG' > >> > >> and running 'sysctl hw.acpi.battery' again. Post /var/log/messages ACPI > >> messages about battery here. > >> > >> Anthony > >> > >>> Cheers, > >>> Daniele. > >>> _______________________________________________ > >>> freebsd-acpi@freebsd.org mailing list > >>> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi > >>> To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org > " > >>> > >> > > _______________________________________________ > > freebsd-acpi@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-acpi > > To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" > > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAC=ypSULmXU2HBpG2gf2J=9_o-sLccECud%2Be9KUg6-ppz7phww>