Date: Sat, 18 May 2002 12:06:11 +0400 From: "Igor B. Bykhalo" <goshik@binep.ac.ru> To: "Vladislav V. Zhuk" <admin@dru.dn.ua>, "Tod McQuillin" <devin@spamcop.net> Cc: <freebsd-stable@freebsd.org> Subject: Re: new ATA bug Message-ID: <02cb01c1fe42$f29481c0$ea2ce9c1@binep.ac.ru> References: <20020516074543.GA46926@dru.dn.ua> <Pine.GSO.4.44.0205160259590.9977-100000@sysadmin> <20020516083340.GE46926@dru.dn.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
From: "Vladislav V. Zhuk" <admin@dru.dn.ua> To: "Tod McQuillin" <devin@spamcop.net> Cc: <freebsd-stable@freebsd.org> Sent: Thursday, May 16, 2002 12:33 PM Subject: Re: new ATA bug > On Thu, May 16, 2002 at 03:01:21AM -0500, Tod McQuillin wrote: > > > > I have disabled secondary IDE interface in BIOS and kernel config: > > > > > > # ATA and ATAPI devices > > > device ata0 at isa? port IO_WD1 irq 14 > > > #device ata1 at isa? port IO_WD2 irq 15 > > > > > > but ata driver still locked IRQ 15: > > > > > > --- cut dmesg.boot --- > > > atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 > > > ata0: at 0x1f0 irq 14 on atapci0 > > > ata1: at 0x170 irq 15 on atapci0 > > > --- end cut --- > > > > > > I need this IRQ for other device. > > > > > > How I can release this system resource from ata and use with other device?? > > > > I solved it with 'atacontrol detach 1' > > > > See my earlier posting at > > http://groups.google.com/groups?hl=en&lr=&safe=off&selm=20020323172101.B826-100000%40glass.pun-pun.prv.lucky.freebsd.stable&rnum=1 > > I have replied (may be not for you): this is not solution for me. > My box hung at once mounting disks until herdware reset. > > Your advice helps to resolve consequence of bug > (in some cases), but not fix it :( > Don't know how to fix, but have you tried to put di ata1 line into /boot/kernel.conf as a (dumb) workaround? HTH, Igor > -- > Vladislav V. Zhuk (06267)3-60-03 admin@dru.dn.ua 2:465/197@FidoNet.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?02cb01c1fe42$f29481c0$ea2ce9c1>