Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 16 Sep 2004 20:00:16 +0200
From:      "Niels Piersma" <niels@piersma.com>
To:        "Xander Damen" <xdamen@sci.kun.nl>, <freebsd-stable@freebsd.org>
Subject:   RE: IBM xSeries 225 with single processor - can't boot 5.x?
Message-ID:  <BCCBA5EE241EC84081AEF0C71B99DCE50CC6BD@icarus.piersma.local>

next in thread | raw e-mail | index | archive | help
I'll try later this week. (After IBM repairs my server!!!) It just broke
down today. Doesn't respond to powerbutton anymore.....

%Niels
-----Original Message-----
From: owner-freebsd-stable@freebsd.org
[mailto:owner-freebsd-stable@freebsd.org] On Behalf Of Xander Damen
Sent: donderdag 16 september 2004 18:40
To: Niels Piersma; freebsd-stable@freebsd.org
Subject: Re: IBM xSeries 225 with single processor - can't boot 5.x?

Don't know if it is exactly the same problem, but when I tried to boot
5.x=20
on the IBM Netfinity 5100, it would hang. When I disabled acpi in the
kernel=20
it did boot.

Xander
----- Original Message -----=20
From: "Niels Piersma" <niels@piersma.com>
To: <freebsd-stable@freebsd.org>
Sent: Thursday 16 September 2004 17:47
Subject: RE: IBM xSeries 225 with single processor - can't boot 5.x?


Jim,

I have the same problem. Even after BIOS upgrades etc. it didn't want to
boot. (endless screens of dumps). In the end I reverted back to FreeBSD
4.10.

I can confirm this problem occurs on SINGLE processor x225 machines.

%Niels


-----Original Message-----
From: owner-freebsd-stable@freebsd.org
[mailto:owner-freebsd-stable@freebsd.org] On Behalf Of
jcaldwell@ymcastlouis.org
Sent: donderdag 16 september 2004 17:38
To: freebsd-stable@freebsd.org
Subject: IBM xSeries 225 with single processor - can't boot 5.x?

I've got a number of IBM xSeries x225 servers, which are dual-capable
but
right now have only one Xeon processor each. Attempting to boot from the

install CD for both 5.2.1 and 5.3-BETA3 yields the same problem -
endless
streams of what look like register states, seperated by single
characters
of the '/|\-' sequence. Doesn't even get past the boot loader.

Any thoughts on this? I'm in the process of switching all of my i386
NetBSD and Novell servers over to FreeBSD (faster release cycle, so
better
new hardware support), so I'm not familair with the subtle nuances of
FreeBSD yet, but I do have it working on about 4 other machines - 3
single-processor machines and one dual-processor with both CPUs in
place.
I'm wondering if the problem might have something to do with that empty
processor socket, or the fact that it's a Xeon.

-Jim
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to
"freebsd-stable-unsubscribe@freebsd.org"



Piersma.COM is een handelsnaam van Piersma Beheer B.V.

This message contains confidential information and is intended only for
the=20
individual named. If you are not the named addressee you should not=20
disseminate, distribute or copy this e-mail. Please notify the sender=20
immediately by e-mail if you have received this e-mail by mistake and
delete=20
this e-mail from your system. E-mail transmission cannot be guaranteed
to be=20
secure or error-free as information could be intercepted, corrupted,
lost,=20
destroyed, arrive late or incomplete, or contain viruses. The sender=20
therefore does not accept liability for any errors or omissions in the=20
contents of this message which arise as a result of e-mail transmission.
If=20
verification is required please request a hard-copy version.



_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to
"freebsd-stable-unsubscribe@freebsd.org"



_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to
"freebsd-stable-unsubscribe@freebsd.org"




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BCCBA5EE241EC84081AEF0C71B99DCE50CC6BD>