Date: Wed, 19 Jul 2000 08:59:46 -0400 (EDT) From: Mohsin Rahman <mtech@buffnet.net> To: FreeBSD Questions <freebsd-questions@FreeBSD.ORG> Subject: OT - XFree86 4.0.1 Message-ID: <Pine.BSF.4.05.10007190846120.20565-100000@buffnet11.buffnet.net>
next in thread | raw e-mail | index | archive | help
I have FreeBSD 4.0-RELEASE installed on a AMD Athlon. Works great.
When I go to configure XFree86 4.0.1 from the ports collection,
it runs thru fine, and then according to the docs, I issue:
XFree86 -configure
It tells me to test the new server by
XFree86 -xf86config /root/XF86Config.new
which I do, and I get the grey screen, but nothing else. Ctrl-Alt-+
does not do anything, and other than just grey screen, I get nothing.
Has anyone on the list gotten XFree86 4.0.1 to run with an ATI card.
It shoud be straight forward, but cant get it to work. Thanks in
advance. I have gone thru the docs on Xfree86.org, but still get
stuck at this grey screen. Any pointer appreciated.
--DMESG OUTPUT--
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #0: Mon Mar 20 22:50:22 GMT 2000
root@monster.cdrom.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (807.96-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x621 Stepping = 1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 134152192 (131008K bytes)
avail memory = 126185472 (123228K bytes)
Preloaded elf kernel "kernel.GENERIC" at 0xc03c0000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AMD-751 host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AMD-751 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Rage128-RF graphics accelerator> at 5.0 irq 11
isab0: <PCI to ISA bridge (vendor=1022 device=7408)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 756 ATA66 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip1: <PCI to Other bridge (vendor=1022 device=740b)> at device 7.3 on pci0
pci0: <OHCI USB controller> at 7.4 irq 10
pci0: <unknown card> (vendor=0x14f1, dev=0x2013) at 10.0 irq 9
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xde00-0xde3f mem 0xefe00000-0xefefffff,0xeffff000-0xefffffff irq 10 at device 11.0 on pci0
fxp0: Ethernet address xx:xx:xx:xx:xx:xx
fxp0: supplying EUI64: xx:xx:xx:xx:xx:xx:xx:xx
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x278-0x27f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
unknown0: <Audio> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
unknown1: <Generic ESDI/IDE/ATA controller> at port 0x1e8-0x1ef,0x3ee-0x3ef irq 11 on isa0
unknown2: <WaveTable> at port 0x620-0x623 on isa0
unknown3: <Game> at port 0x200-0x207 on isa0
ad0: 12407MB <Maxtor 91301U3> [25209/16/63] at ata0-master using UDMA66
ad1: 8056MB <ST38421A> [16368/16/63] at ata0-slave using UDMA66
acd0: CD-RW <Hewlett-Packard CD-Writer Plus 8100> at ata1-master using PIO3
acd1: DVD-ROM <SAMSUNG DVD-ROM SD-608> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad1s1a
--DMESG OUTPUT--
Mohsin AbdulRahman
MTech@BuffNET.Net
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.10007190846120.20565-100000>