Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 14 Dec 2013 01:15:27 +0000 (UTC)
From:      Ian Lepore <ian@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-10@freebsd.org
Subject:   svn commit: r259379 - in stable/10/sys: arm/at91 dev/nand
Message-ID:  <201312140115.rBE1FRhv018218@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: ian
Date: Sat Dec 14 01:15:26 2013
New Revision: 259379
URL: http://svnweb.freebsd.org/changeset/base/259379

Log:
  MFC r258828:
  
    Add a nand flash controller driver for Atmel at91 family.  Tested only
    on at91rm9200 so far.

Added:
  stable/10/sys/dev/nand/nfc_at91.c
     - copied unchanged from r258828, head/sys/dev/nand/nfc_at91.c
Modified:
  stable/10/sys/arm/at91/files.at91
Directory Properties:
  stable/10/   (props changed)

Modified: stable/10/sys/arm/at91/files.at91
==============================================================================
--- stable/10/sys/arm/at91/files.at91	Sat Dec 14 01:14:38 2013	(r259378)
+++ stable/10/sys/arm/at91/files.at91	Sat Dec 14 01:15:26 2013	(r259379)
@@ -5,7 +5,7 @@ arm/at91/at91_machdep.c		standard
 arm/at91/at91.c			standard
 arm/at91/at91_cfata.c		optional	at91_cfata
 arm/at91/at91_mci.c		optional	at91_mci
-arm/at91/at91_nand.c		optional	nand
+dev/nand/nfc_at91.c		optional	nand
 arm/at91/at91_pio.c		standard
 arm/at91/at91_pmc.c		standard
 arm/at91/at91_pit.c		optional	at91sam9

Copied: stable/10/sys/dev/nand/nfc_at91.c (from r258828, head/sys/dev/nand/nfc_at91.c)
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ stable/10/sys/dev/nand/nfc_at91.c	Sat Dec 14 01:15:26 2013	(r259379, copy of r258828, head/sys/dev/nand/nfc_at91.c)
@@ -0,0 +1,258 @@
+/*-
+ * Copyright (C) 2013 Ian Lepore.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * Atmel at91-family integrated NAND controller driver.
+ *
+ * This code relies on the board setup code (in at91/board_whatever.c) having
+ * set up the EBI and SMC registers appropriately for whatever type of nand part
+ * is on the board.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/proc.h>
+#include <sys/bus.h>
+#include <sys/conf.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/malloc.h>
+#include <sys/rman.h>
+#include <sys/lock.h>
+#include <sys/mutex.h>
+#include <sys/time.h>
+
+#include <machine/bus.h>
+
+#include <dev/nand/nand.h>
+#include <dev/nand/nandbus.h>
+#include "nfc_if.h"
+
+/*
+ * Data cycles are triggered by access to any address within the EBI CS3 region
+ * that has A21 and A22 clear.  Command cycles are any access with bit A21
+ * asserted. Address cycles are any access with bit A22 asserted.
+ *
+ * XXX The atmel docs say that any address bits can be used instead of A21 and
+ * A22; these values should be configurable.
+ */
+#define	AT91_NAND_DATA		0
+#define	AT91_NAND_COMMAND	(1 << 21)
+#define	AT91_NAND_ADDRESS	(1 << 22)
+
+struct at91_nand_softc {
+	struct nand_softc	nand_sc;
+	struct resource		*res;
+};
+
+static int	at91_nand_attach(device_t);
+static int	at91_nand_probe(device_t);
+static uint8_t	at91_nand_read_byte(device_t);
+static void	at91_nand_read_buf(device_t, void *, uint32_t);
+static int	at91_nand_read_rnb(device_t);
+static int	at91_nand_select_cs(device_t, uint8_t);
+static int	at91_nand_send_command(device_t, uint8_t);
+static int	at91_nand_send_address(device_t, uint8_t);
+static void	at91_nand_write_buf(device_t, void *, uint32_t);
+
+static inline u_int8_t
+dev_read_1(struct at91_nand_softc *sc, bus_size_t offset)
+{
+	return bus_read_1(sc->res, offset);
+}
+
+static inline void
+dev_write_1(struct at91_nand_softc *sc, bus_size_t offset, u_int8_t value)
+{
+	bus_write_1(sc->res, offset, value);
+}
+
+static int
+at91_nand_probe(device_t dev)
+{
+
+	device_set_desc(dev, "AT91 Integrated NAND controller");
+	return (BUS_PROBE_DEFAULT);
+}
+
+static int
+at91_nand_attach(device_t dev)
+{
+	struct at91_nand_softc *sc;
+	int err, rid;
+
+	sc = device_get_softc(dev);
+	rid = 0;
+	sc->res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
+	    RF_ACTIVE);
+	if (sc->res == NULL) {
+		device_printf(dev, "could not allocate resources!\n");
+		return (ENXIO);
+	}
+
+	nand_init(&sc->nand_sc, dev, NAND_ECC_SOFT, 0, 0, NULL, NULL);
+
+	err = nandbus_create(dev);
+
+	return (err);
+}
+
+static int
+at91_nand_send_command(device_t dev, uint8_t command)
+{
+	struct at91_nand_softc *sc;
+
+        /* nand_debug(NDBG_DRV,"at91_nand_send_command: 0x%02x", command); */
+
+	sc = device_get_softc(dev);
+	dev_write_1(sc, AT91_NAND_COMMAND, command);
+	return (0);
+}
+
+static int
+at91_nand_send_address(device_t dev, uint8_t addr)
+{
+	struct at91_nand_softc *sc;
+
+        /* nand_debug(NDBG_DRV,"at91_nand_send_address: x%02x", addr); */
+
+	sc = device_get_softc(dev);
+	dev_write_1(sc, AT91_NAND_ADDRESS, addr);
+	return (0);
+}
+
+static uint8_t
+at91_nand_read_byte(device_t dev)
+{
+	struct at91_nand_softc *sc;
+	uint8_t data;
+
+	sc = device_get_softc(dev);
+	data = dev_read_1(sc, AT91_NAND_DATA);
+
+        /* nand_debug(NDBG_DRV,"at91_nand_read_byte: 0x%02x", data); */
+
+	return (data);
+}
+
+
+static void
+at91_nand_dump_buf(const char *op, void* buf, uint32_t len)
+{
+	int i;
+	uint8_t *b = buf;
+
+	printf("at91_nand_%s_buf (hex):", op);
+	for (i = 0; i < len; i++) {
+		if ((i & 0x01f) == 0)
+			printf("\n");
+		printf(" %02x", b[i]);
+	}
+	printf("\n");
+}
+
+static void
+at91_nand_read_buf(device_t dev, void* buf, uint32_t len)
+{
+	struct at91_nand_softc *sc;
+
+	sc = device_get_softc(dev);
+
+	bus_read_multi_1(sc->res, AT91_NAND_DATA, buf, len);
+
+	if (nand_debug_flag & NDBG_DRV)
+		at91_nand_dump_buf("read", buf, len);
+}
+
+static void
+at91_nand_write_buf(device_t dev, void* buf, uint32_t len)
+{
+	struct at91_nand_softc *sc;
+
+	sc = device_get_softc(dev);
+
+	if (nand_debug_flag & NDBG_DRV)
+		at91_nand_dump_buf("write", buf, len);
+
+	bus_write_multi_1(sc->res, AT91_NAND_DATA, buf, len);
+}
+
+static int
+at91_nand_select_cs(device_t dev, uint8_t cs)
+{
+
+	if (cs > 0)
+		return (ENODEV);
+
+	return (0);
+}
+
+static int
+at91_nand_read_rnb(device_t dev)
+{
+#if 0
+	/*
+         * XXX There's no way for this code to know which GPIO pin (if any) is
+         * attached to the chip's RNB line.  Not to worry, nothing calls this;
+         * at higher layers, all the nand code uses status commands.
+         */
+	uint32_t bits;
+
+	bits = at91_pio_gpio_get(AT91RM92_PIOD_BASE, AT91C_PIO_PD15);
+	nand_debug(NDBG_DRV,"at91_nand: read_rnb: %#x", bits);
+	return (bits != 0); /* ready */
+#endif	
+	panic("at91_nand_read_rnb() is not implemented\n");
+	return (0);
+}
+
+static device_method_t at91_nand_methods[] = {
+	DEVMETHOD(device_probe,		at91_nand_probe),
+	DEVMETHOD(device_attach,	at91_nand_attach),
+
+	DEVMETHOD(nfc_send_command,	at91_nand_send_command),
+	DEVMETHOD(nfc_send_address,	at91_nand_send_address),
+	DEVMETHOD(nfc_read_byte,	at91_nand_read_byte),
+	DEVMETHOD(nfc_read_buf,		at91_nand_read_buf),
+	DEVMETHOD(nfc_write_buf,	at91_nand_write_buf),
+	DEVMETHOD(nfc_select_cs,	at91_nand_select_cs),
+	DEVMETHOD(nfc_read_rnb,		at91_nand_read_rnb),
+
+	DEVMETHOD_END
+};
+
+static driver_t at91_nand_driver = {
+	"nand",
+	at91_nand_methods,
+	sizeof(struct at91_nand_softc),
+};
+
+static devclass_t at91_nand_devclass;
+DRIVER_MODULE(at91_nand, atmelarm, at91_nand_driver, at91_nand_devclass, 0, 0);
+



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201312140115.rBE1FRhv018218>